Syringe Filters Whatman
- Сортировать:
- Вид таблицей
-
Whatman® Anotop® 10 Plus syringe filters WHA68093002
NACRES: NB.24 General descriptionNote: Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
The Anotop 10 Plus syringe filter offers the added benefit of an integral glass microfiber prefilter. This unit is designed to enable difficult and hard-to-filter solutions to be filtered without adversely affecting the filtration efficiency of the final membrane. This can eliminate the need for sample clean-up or expensive and time-consuming sequential filtration.
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.ApplicationApplications:- Filtration of heavily particulate loaded samples prior to HPLC
- Removal of solids prior to UV/Vis analysis
SuitabilitySuitable for removal of solids prior to UV/Vis analysis. Suitable with aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility non-sterile feature glass microfiber prefilter packaging pack of 50 Торговая марка Whatman 6809-3002, Whatman Article No. 28420398 (US reference) diam. 10 mm volume 10 mL pore size 0.02 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 10 Plus syringe filters WHA68093022
NACRES: NB.24 General descriptionNote: Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
The Anotop 10 Plus syringe filter offers the added benefit of an integral glass microfiber prefilter. This unit is designed to enable difficult and hard-to-filter solutions to be filtered without adversely affecting the filtration efficiency of the final membrane. This can eliminate the need for sample clean-up or expensive and time-consuming sequential filtration.
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.ApplicationApplications:- Filtration of heavily particulate loaded samples prior to HPLC
- Removal of solids prior to UV/Vis analysis
SuitabilitySuitable for removal of solids prior to UV/Vis analysis. Suitable with aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility non-sterile feature glass microfiber prefilter packaging pack of 50 Торговая марка Whatman 6809-3022, Whatman Article No. 28420400 (US reference) diam. 10 mm volume 10 mL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 10 Plus syringe filters WHA68093122
NACRES: NB.24 General descriptionNote: Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
The Anotop 10 Plus syringe filter offers the added benefit of an integral glass microfiber prefilter. This unit is designed to enable difficult and hard-to-filter solutions to be filtered without adversely affecting the filtration efficiency of the final membrane. This can eliminate the need for sample clean-up or expensive and time-consuming sequential filtration.
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.ApplicationApplications:- Filtration of heavily particulate loaded samples prior to HPLC
- Removal of solids prior to UV/Vis analysis
SuitabilitySuitable for removal of solids prior to UV/Vis analysis. Suitable with aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility sterile feature glass microfiber prefilter packaging pack of 50 Торговая марка Whatman 6809-3122, Whatman Article No. 28420403 (US reference) diam. 10 mm volume 10 mL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 10 Plus syringe filters WHA68093102
NACRES: NB.24 General descriptionNote: Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
The Anotop 10 Plus syringe filter offers the added benefit of an integral glass microfiber prefilter. This unit is designed to enable difficult and hard-to-filter solutions to be filtered without adversely affecting the filtration efficiency of the final membrane. This can eliminate the need for sample clean-up or expensive and time-consuming sequential filtration.
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.ApplicationApplications:- Filtration of heavily particulate loaded samples prior to HPLC
- Removal of solids prior to UV/Vis analysis
SuitabilitySuitable for removal of solids prior to UV/Vis analysis. Suitable with aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility sterile feature glass microfiber prefilter packaging pack of 50 Торговая марка Whatman 6809-3102, Whatman Article No. 28420401 (US reference) diam. 10 mm volume 10 mL pore size 0.02 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 10 Plus syringe filters WHA68093012
NACRES: NB.24 General descriptionNote: Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
The Anotop 10 Plus syringe filter offers the added benefit of an integral glass microfiber prefilter. This unit is designed to enable difficult and hard-to-filter solutions to be filtered without adversely affecting the filtration efficiency of the final membrane. This can eliminate the need for sample clean-up or expensive and time-consuming sequential filtration.
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.ApplicationApplications:- Filtration of heavily particulate loaded samples prior to HPLC
- Removal of solids prior to UV/Vis analysis
SuitabilitySuitable for removal of solids prior to UV/Vis analysis. Suitable with aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility non-sterile packaging pack of 50 Торговая марка Whatman 6809-3012, Whatman Article No. 28420399 (US reference) diam. 10 mm volume 10 mL pore size 0.1 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 10 Plus syringe filters WHA68093112
NACRES: NB.24 General descriptionNote: Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
The Anotop 10 Plus syringe filter offers the added benefit of an integral glass microfiber prefilter. This unit is designed to enable difficult and hard-to-filter solutions to be filtered without adversely affecting the filtration efficiency of the final membrane. This can eliminate the need for sample clean-up or expensive and time-consuming sequential filtration.
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.ApplicationApplications:- Filtration of heavily particulate loaded samples prior to HPLC
- Removal of solids prior to UV/Vis analysis
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial polypropylene housing, polypropylene membrane (pigment-free) sterility sterile packaging pkg of 50 ea Торговая марка Whatman 6809-3112, Whatman Article No. 28420402 (US reference) diam. 10 mm volume 20 µL pore size 0.1 µm (with glass microfiber prefilter) fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 10 syringe filter WHA68091112
NACRES: NB.24 General descriptionAnotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 10 mm diameter syringe filter
- Inorganic membrane
- Capillary pore structure
- Low protein binding
- Filters sample volume up to 10 mL
- Low hold-up volume <20 µl ensures maximum sample recovery
- Sterile formats are available for critical applications
SuitabilityLow protein binding. Suitable for aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility sterile packaging pack of 50 Торговая марка Whatman 6809-1112, Whatman Article No. 28420389 (US reference) diam. 10 mm volume 10 mL pore size 0.1 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 10 syringe filter WHA68091002
NACRES: NB.24 General descriptionAnotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 10 mm diameter syringe filter
- Inorganic membrane
- Capillary pore structure
- Low protein binding
- Filters sample volume up to 10 mL
- Low hold-up volume <20 µl ensures maximum sample recovery
- Sterile formats are available for critical applications
SuitabilityLow protein binding. Suitable for aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility non-sterile packaging pack of 50 Торговая марка Whatman 6809-1002, Whatman Article No. 28420385 (US reference) diam. 10 mm volume 10 mL pore size 0.02 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 10 syringe filter WHA68091122
NACRES: NB.24 General descriptionAnotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 10 mm diameter syringe filter
- Inorganic membrane
- Capillary pore structure
- Low protein binding
- Filters sample volume up to 10 mL
- Low hold-up volume <20 µl ensures maximum sample recovery
- Sterile formats are available for critical applications
SuitabilityLow protein binding. Suitable for aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility sterile packaging pack of 50 Торговая марка Whatman 6809-1122, Whatman Article No. 28420390 (US reference) diam. 10 mm volume 10 mL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 10 syringe filter WHA68091102
NACRES: NB.24 General descriptionAnotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 10 mm diameter syringe filter
- Inorganic membrane
- Capillary pore structure
- Low protein binding
- Filters sample volume up to 10 mL
- Low hold-up volume <20 µl ensures maximum sample recovery
- Sterile formats are available for critical applications
SuitabilityLow protein binding. Suitable for aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility sterile packaging pack of 50 Торговая марка Whatman 6809-1102, Whatman Article No. 28420388 (US reference) diam. 10 mm volume 10 mL pore size 0.02 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 10 syringe filter WHA68091022
NACRES: NB.24 General descriptionAnotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 10 mm diameter syringe filter
- Inorganic membrane
- Capillary pore structure
- Low protein binding
- Filters sample volume up to 10 mL
- Low hold-up volume <20 µl ensures maximum sample recovery
- Sterile formats are available for critical applications
SuitabilityLow protein binding. Suitable for aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility non-sterile packaging pack of 50 Торговая марка Whatman 6809-1022, Whatman Article No. 28420387 (US reference) diam. 10 mm volume 10 mL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 10 syringe filter WHA68091012
NACRES: NB.24 General descriptionAnotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 10 mm diameter syringe filter
- Inorganic membrane
- Capillary pore structure
- Low protein binding
- Filters sample volume up to 10 mL
- Low hold-up volume <20 µl ensures maximum sample recovery
- Sterile formats are available for critical applications
SuitabilityLow protein binding. Suitable for aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility non-sterile packaging pack of 50 Торговая марка Whatman 6809-1012, Whatman Article No. 28420386 (US reference) diam. 10 mm volume 10 mL pore size 0.1 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 Plus syringe filter WHA68094102
NACRES: NB.24 General descriptionThe Anotop 25 Plus syringe filter offers the added benefit of an integral glass microfiber prefilter. This unit is designed to enable difficult and hard-to-filter solutions to be filtered without adversely affecting the filtration efficiency of the final membrane. This can eliminate the need for sample clean-up or expensive and time-consuming sequential filtration.
Applications- Filtration of tissue culture media
- Clean-up of difficult samples
- Filtration of colloidal material
- Removal of mycoplasma
- HPLC sample preparation
- Biological sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility sterile feature glass microfiber prefilter packaging pkg of 50 ea Торговая марка Whatman 6809-4102, Whatman Article No. 28420408 (US reference) diam. 25 mm volume 100 mL pore size 0.02 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 Plus syringe filter WHA68094002
NACRES: NB.24 General descriptionThe Anotop 25 Plus syringe filter offers the added benefit of an integral glass microfiber prefilter. This unit is designed to enable difficult and hard-to-filter solutions to be filtered without adversely affecting the filtration efficiency of the final membrane. This can eliminate the need for sample clean-up or expensive and time-consuming sequential filtration.
Applications- Filtration of tissue culture media
- Clean-up of difficult samples
- Filtration of colloidal material
- Removal of mycoplasma
- HPLC sample preparation
- Biological sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility non-sterile feature glass microfiber prefilter packaging pkg of 50 ea Торговая марка Whatman 6809-4002, Whatman Article No. 28420404 (US reference) diam. 25 mm volume 100 mL pore size 0.02 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 Plus syringe filter WHA68094012
NACRES: NB.24 General descriptionThe Anotop 25 Plus syringe filter offers the added benefit of an integral glass microfiber prefilter. This unit is designed to enable difficult and hard-to-filter solutions to be filtered without adversely affecting the filtration efficiency of the final membrane. This can eliminate the need for sample clean-up or expensive and time-consuming sequential filtration.
Applications- Filtration of tissue culture media
- Clean-up of difficult samples
- Filtration of colloidal material
- Removal of mycoplasma
- HPLC sample preparation
- Biological sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility non-sterile feature glass microfiber prefilter packaging pkg of 50 ea Торговая марка Whatman 6809-4012, Whatman Article No. 28420405 (US reference) diam. 25 mm volume 100 mL pore size 0.1 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 Plus syringe filter WHA68094112
NACRES: NB.24 General descriptionThe Anotop 25 Plus syringe filter offers the added benefit of an integral glass microfiber prefilter. This unit is designed to enable difficult and hard-to-filter solutions to be filtered without adversely affecting the filtration efficiency of the final membrane. This can eliminate the need for sample clean-up or expensive and time-consuming sequential filtration.
Applications- Filtration of tissue culture media
- Clean-up of difficult samples
- Filtration of colloidal material
- Removal of mycoplasma
- HPLC sample preparation
- Biological sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility sterile feature glass microfiber prefilter packaging pkg of 50 ea Торговая марка Whatman 6809-4112, Whatman Article No. 28420409 (US reference) diam. 25 mm volume 100 mL pore size 0.1 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 Plus syringe filter WHA68094024
NACRES: NB.24 General descriptionThe Anotop 25 Plus syringe filter offers the added benefit of an integral glass microfiber prefilter. This unit is designed to enable difficult and hard-to-filter solutions to be filtered without adversely affecting the filtration efficiency of the final membrane. This can eliminate the need for sample clean-up or expensive and time-consuming sequential filtration.
Applications- Filtration of tissue culture media
- Clean-up of difficult samples
- Filtration of colloidal material
- Removal of mycoplasma
- HPLC sample preparation
- Biological sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility sterile feature glass microfiber prefilter packaging pkg of 200 ea Торговая марка Whatman 6809-4024, Whatman Article No. 28420407 (US reference) diam. 25 mm volume 100 mL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 Plus syringe filter WHA68094022
NACRES: NB.24 General descriptionThe Anotop 25 Plus syringe filter offers the added benefit of an integral glass microfiber prefilter. This unit is designed to enable difficult and hard-to-filter solutions to be filtered without adversely affecting the filtration efficiency of the final membrane. This can eliminate the need for sample clean-up or expensive and time-consuming sequential filtration.
Applications- Filtration of tissue culture media
- Clean-up of difficult samples
- Filtration of colloidal material
- Removal of mycoplasma
- HPLC sample preparation
- Biological sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility non-sterile feature glass microfiber prefilter packaging pkg of 50 ea Торговая марка Whatman 6809-4022, Whatman Article No. 28420406 (US reference) diam. 25 mm volume 100 mL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 Plus syringe filter WHA68094122
NACRES: NB.24 General descriptionThe Anotop 25 Plus syringe filter offers the added benefit of an integral glass microfiber prefilter. This unit is designed to enable difficult and hard-to-filter solutions to be filtered without adversely affecting the filtration efficiency of the final membrane. This can eliminate the need for sample clean-up or expensive and time-consuming sequential filtration.
Applications- Filtration of tissue culture media
- Clean-up of difficult samples
- Filtration of colloidal material
- Removal of mycoplasma
- HPLC sample preparation
- Biological sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane, polypropylene housing sterility sterile feature glass microfiber prefilter packaging pkg of 50 ea Торговая марка Whatman 6809-4122, Whatman Article No. 28420410 (US reference) diam. 25 mm volume 100 mL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 syringe filters WHA68092122
NACRES: NB.24 General descriptionWhatman® Anotop® 25 Syringe Filter
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 25 mm diameter syringe filter
- Filters sample volume up to 100 mL
ApplicationApplications:- Cold sterilization of growth media
- Phage and virus filtration
- Removal of high molecular weight proteins or polymers
- Liposome extrusion
- Filtration of solvents for spectroanalysis and analytical sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial Anopore membrane, alumina based membrane, alumina based membrane, polypropylene housing sterility sterile packaging pack of 50 Торговая марка Whatman 6809-2122, Whatman Article No. 28420397 (US reference) diam. 25 mm sample volume 100 mL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 syringe filters WHA68092002
NACRES: NB.24 General descriptionWhatman® Anotop® 25 Syringe Filter
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 25 mm diameter syringe filter
- Filters sample volume up to 100 mL
ApplicationApplications:- Cold sterilization of growth media
- Phage and virus filtration
- Removal of high molecular weight proteins or polymers
- Liposome extrusion
- Filtration of solvents for spectroanalysis and analytical sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial Anopore membrane, alumina based membrane, alumina based membrane, polypropylene housing sterility non-sterile packaging pack of 50 Торговая марка Whatman 6809-2002, Whatman Article No. 28420391 (US reference) diam. 25 mm sample volume 100 mL pore size 0.02 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 syringe filters WHA68092022
NACRES: NB.24 General descriptionWhatman® Anotop® 25 Syringe Filter
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 25 mm diameter syringe filter
- Filters sample volume up to 100 mL
ApplicationApplications:- Cold sterilization of growth media
- Phage and virus filtration
- Removal of high molecular weight proteins or polymers
- Liposome extrusion
- Filtration of solvents for spectroanalysis and analytical sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial Anopore membrane, alumina based membrane, alumina based membrane, polypropylene housing sterility non-sterile packaging pack of 50 Торговая марка Whatman 6809-2022, Whatman Article No. 28420393 (US reference) diam. 25 mm sample volume 100 mL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 syringe filters WHA68092102
NACRES: NB.24 General descriptionWhatman® Anotop® 25 Syringe Filter
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 25 mm diameter syringe filter
- Filters sample volume up to 100 mL
ApplicationApplications:- Cold sterilization of growth media
- Phage and virus filtration
- Removal of high molecular weight proteins or polymers
- Liposome extrusion
- Filtration of solvents for spectroanalysis and analytical sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial Anopore membrane, alumina based membrane, alumina based membrane, polypropylene housing sterility sterile packaging pack of 50 Торговая марка Whatman 6809-2102, Whatman Article No. 28420395 (US reference) diam. 25 mm sample volume 100 mL pore size 0.02 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 syringe filters Z747815-50EA
General descriptionWhatman® Anotop® 25 Syringe Filter
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 25 mm diameter syringe filter
- Filters sample volume up to 100 mL
ApplicationApplications:- Cold sterilization of growth media
- Phage and virus filtration
- Removal of high molecular weight proteins or polymers
- Liposome extrusion
- Filtration of solvents for spectroanalysis and analytical sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesThis product has been replaced by WHA68092112-ALDRICH | Whatman Anotop 25 syringe filters, sterile 0.1 μm, 50/pk,
Global SIAL customers (excluding Japan) can now order any product from the Cytiva Life Sciences consumables portfolio (prepack only) using GEs product numbering system.
The legacy GE Whatman products that use the SIAL "Z" product numbering system will be discontinued and directly replaced with a product number using a "WHA" prefix plus the GE product code. For reference, the legacy "Z" product number is identified as a synonym on the "WHA" product number listing.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial Anopore membrane, alumina based membrane, alumina based membrane, polypropylene housing sterility sterile packaging pack of 50 Торговая марка Whatman 6809-2112, Whatman Article No. 28420396 (US reference) diam. 25 mm sample volume 100 mL pore size 0.1 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 syringe filters WHA68092112
NACRES: NB.24 General descriptionWhatman® Anotop® 25 Syringe Filter
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 25 mm diameter syringe filter
- Filters sample volume up to 100 mL
ApplicationApplications:- Cold sterilization of growth media
- Phage and virus filtration
- Removal of high molecular weight proteins or polymers
- Liposome extrusion
- Filtration of solvents for spectroanalysis and analytical sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial Anopore membrane, alumina based membrane, alumina based membrane, polypropylene housing sterility sterile packaging pack of 50 Торговая марка Whatman 6809-2112, Whatman Article No. 28420396 (US reference) diam. 25 mm sample volume 100 mL pore size 0.1 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® 25 syringe filters WHA68092012
NACRES: NB.24 General descriptionWhatman® Anotop® 25 Syringe Filter
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 25 mm diameter syringe filter
- Filters sample volume up to 100 mL
ApplicationApplications:- Cold sterilization of growth media
- Phage and virus filtration
- Removal of high molecular weight proteins or polymers
- Liposome extrusion
- Filtration of solvents for spectroanalysis and analytical sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial Anopore membrane, alumina based membrane, alumina based membrane, polypropylene housing sterility non-sterile packaging pack of 50 Торговая марка Whatman 6809-2012, Whatman Article No. 28420392 (US reference) diam. 25 mm sample volume 100 mL pore size 0.1 µm fitting female Luer inlet lock, male Luer outlet Узнать цену -
Whatman® Anotop® 25 syringe filters WHA68092024
NACRES: NB.24 General descriptionWhatman® Anotop® 25 Syringe Filter
Anotop syringe filters are a universal solution for numerous filtration applications. Anotop filters can be used with most organic solvents and aqueous materials, and they are suitable for sample volumes up to 100 mL. The distinctive hexagonal housing is manufactured from pigment-free polypropylene to eliminate sample contamination. No wetting agents or adhesives are used in the manufacturing process.
Anotop syringe filters contain the proprietary alumina based Anopore membrane and are supplied in three pore sizes. Glass microfiber prefilter versions are available for difficult-to-filter samples.
Note: Anotop syringe filters contain the proprietary alumina based Anopore membrane.
Features and Benefits:- 25 mm diameter syringe filter
- Filters sample volume up to 100 mL
ApplicationApplications:- Cold sterilization of growth media
- Phage and virus filtration
- Removal of high molecular weight proteins or polymers
- Liposome extrusion
- Filtration of solvents for spectroanalysis and analytical sample preparation
SuitabilitySuitable for filtration of aqueous or organic solutions.Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial Anopore membrane, alumina based membrane, polypropylene housing sterility non-sterile packaging pack of 200 Торговая марка Whatman 6809-2024, Whatman Article No. 28420394 (US reference) diam. 25 mm sample volume ~100 mL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® IC and LC syringe filter WHA68099232
NACRES: NB.24 General descriptionWhatman Anotop IC and LC syringe filters are specifically designed for the preparation of samples for subsequent ion chromatography and HPLC analysis. These devices ensure very low levels of anion leaching for ion chromatography testing.
Applications: Ion chromatography sample preparation, HPLC sample preparation
Features and Benefits- 10 mm diameter syringe filters
- 25 mm diameter syringe filters
- Each batch certified for IC
- Enhanced consistency of analytical results
- Extended column life
- Certified and guaranteed low levels of anion leaching for improved results
Suitabilityprefiltering samples for ion chromatography and HPLC analysisOther NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane (Anopore), polypropylene housing sterility non-sterile packaging pkg of 50 ea Торговая марка Whatman 6809-9232, Whatman Article No. 28420422 (US reference) diam. 10 mm volume 20 µL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® IC and LC syringe filter WHA68099244
NACRES: NB.24 General descriptionWhatman Anotop IC and LC syringe filters are specifically designed for the preparation of samples for subsequent ion chromatography and HPLC analysis. These devices ensure very low levels of anion leaching for ion chromatography testing.
Applications: Ion chromatography sample preparation, HPLC sample preparation
Features and Benefits- 10 mm diameter syringe filters
- 25 mm diameter syringe filters
- Each batch certified for IC
- Enhanced consistency of analytical results
- Extended column life
- Certified and guaranteed low levels of anion leaching for improved results
Suitabilityprefiltering samples for ion chromatography and HPLC analysisOther NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane (Anopore), polypropylene housing sterility non-sterile packaging pkg of 200 ea Торговая марка Whatman 6809-9244, Whatman Article No. 28420426 (US reference) diam. 25 mm volume 150 µL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® IC and LC syringe filter WHA20025100
NACRES: NB.24 General descriptionWhatman Anotop IC and LC syringe filters are specifically designed for the preparation of samples for subsequent ion chromatography and HPLC analysis. These devices ensure very low levels of anion leaching for ion chromatography testing.
Applications: Ion chromatography sample preparation, HPLC sample preparation
Features and Benefits- 10 mm diameter syringe filters
- 25 mm diameter syringe filters
- Each batch certified for IC
- Enhanced consistency of analytical results
- Extended column life
- Certified and guaranteed low levels of anion leaching for improved results
Suitabilityprefiltering samples for ion chromatography and HPLC analysisOther NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane (Anopore), polypropylene housing sterility non-sterile packaging pkg of 100 ea Торговая марка Whatman 2002-5100, Whatman Article No. 28418656 (US reference) diam. 25 mm volume 150 µL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® IC and LC syringe filter WHA68099235
NACRES: NB.24 General descriptionWhatman Anotop IC and LC syringe filters are specifically designed for the preparation of samples for subsequent ion chromatography and HPLC analysis. These devices ensure very low levels of anion leaching for ion chromatography testing.
Applications: Ion chromatography sample preparation, HPLC sample preparation
Features and Benefits- 10 mm diameter syringe filters
- 25 mm diameter syringe filters
- Each batch certified for IC
- Enhanced consistency of analytical results
- Extended column life
- Certified and guaranteed low levels of anion leaching for improved results
Suitabilityprefiltering samples for ion chromatography and HPLC analysisOther NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane (Anopore), polypropylene housing sterility non-sterile packaging pkg of 250 ea Торговая марка Whatman 6809-9235, Whatman Article No. 28420425 (US reference) diam. 10 mm volume 20 µL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® IC and LC syringe filter WHA20010100
NACRES: NB.24 General descriptionWhatman Anotop IC and LC syringe filters are specifically designed for the preparation of samples for subsequent ion chromatography and HPLC analysis. These devices ensure very low levels of anion leaching for ion chromatography testing.
Applications: Ion chromatography sample preparation, HPLC sample preparation
Features and Benefits- 10 mm diameter syringe filters
- 25 mm diameter syringe filters
- Each batch certified for IC
- Enhanced consistency of analytical results
- Extended column life
- Certified and guaranteed low levels of anion leaching for improved results
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane (Anopore), polypropylene housing sterility non-sterile packaging pkg of 100 ea Торговая марка Whatman 2001-0100, Whatman Article No. 28418654 (US reference) diam. 10 mm volume 20 µL pore size 0.2 µm fitting Luer (lock) Узнать цену -
Whatman® Anotop® IC and LC syringe filter WHA20010200
NACRES: NB.24 General descriptionWhatman Anotop IC and LC syringe filters are specifically designed for the preparation of samples for subsequent ion chromatography and HPLC analysis. These devices ensure very low levels of anion leaching for ion chromatography testing.
Applications: Ion chromatography sample preparation, HPLC sample preparation
Features and Benefits- 10 mm diameter syringe filters
- 25 mm diameter syringe filters
- Each batch certified for IC
- Enhanced consistency of analytical results
- Extended column life
- Certified and guaranteed low levels of anion leaching for improved results
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane (Anopore), polypropylene housing sterility non-sterile packaging pkg of 200 ea Торговая марка Whatman 2001-0200, Whatman Article No. 28418655 (US reference) diam. 10 mm volume 20 µL pore size 0.2 µm fitting Luer (lock) Узнать цену -
Whatman® Anotop® IC and LC syringe filter WHA20025200
NACRES: NB.24 General descriptionWhatman Anotop IC and LC syringe filters are specifically designed for the preparation of samples for subsequent ion chromatography and HPLC analysis. These devices ensure very low levels of anion leaching for ion chromatography testing.
Applications: Ion chromatography sample preparation, HPLC sample preparation
Features and Benefits- 10 mm diameter syringe filters
- 25 mm diameter syringe filters
- Each batch certified for IC
- Enhanced consistency of analytical results
- Extended column life
- Certified and guaranteed low levels of anion leaching for improved results
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane (Anopore), polypropylene housing sterility non-sterile feature Leur Lock packaging pkg of 200 ea Торговая марка Whatman 2002-5200, Whatman Article No. 28418657 (US reference) diam. 25 mm volume 150 µL pore size 0.2 µm Узнать цену -
Whatman® Anotop® IC and LC syringe filter WHA68099233
NACRES: NB.24 General descriptionWhatman Anotop IC and LC syringe filters are specifically designed for the preparation of samples for subsequent ion chromatography and HPLC analysis. These devices ensure very low levels of anion leaching for ion chromatography testing.
Applications: Ion chromatography sample preparation, HPLC sample preparation
Features and Benefits- 10 mm diameter syringe filters
- 25 mm diameter syringe filters
- Each batch certified for IC
- Enhanced consistency of analytical results
- Extended column life
- Certified and guaranteed low levels of anion leaching for improved results
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane (Anopore), polypropylene housing sterility non-sterile packaging pkg of 100 ea Торговая марка Whatman 6809-9233, Whatman Article No. 28420423 (US reference) diam. 10 mm volume 20 µL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Anotop® IC and LC syringe filter WHA68099234
NACRES: NB.24 General descriptionWhatman Anotop IC and LC syringe filters are specifically designed for the preparation of samples for subsequent ion chromatography and HPLC analysis. These devices ensure very low levels of anion leaching for ion chromatography testing.
Applications: Ion chromatography sample preparation, HPLC sample preparation
Features and Benefits- 10 mm diameter syringe filters
- 25 mm diameter syringe filters
- Each batch certified for IC
- Enhanced consistency of analytical results
- Extended column life
- Certified and guaranteed low levels of anion leaching for improved results
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAnotop is a registered trademark of Cytiva
Whatman is a registered trademark of CytivaПараметрыmaterial alumina based membrane (Anopore), polypropylene housing sterility non-sterile packaging pkg of 200 ea Торговая марка Whatman 6809-9234, Whatman Article No. 28420424 (US reference) diam. 10 mm volume 20 µL pore size 0.2 µm fitting female Luer inlet (lock), male Luer outlet Узнать цену -
Whatman® Autovials™ syringeless filters WHAAV125ENAO
NACRES: NB.24 General descriptionWhatman® Autovial™ Syringeless Filters
Autovial syringeless filters are preassembled filtration devices for removing particulates from samples. They replace syringe-coupled filtration devices with single, disposable units.
Autovial devices are comprised of two parts: a graduated filter barrel and a plunger. The proven design features an integral filter, built-in air purge and a support stand that protects the recessed slip-luer tip. They are available in a 5 mL and 12 mL volume capacity.
The Autovial filter is selected according to membrane compatibility with the sample. In practice, the sample is poured into the 5 mL or 12 mL capacity filter barrel. The plunger is inserted into the barrel until the bottom is securely in place; there is a gap of air between the sample and plunger. Then, the tip of the Autovial is placed into the mouth of an autosampler vial or container and the plunger compressed. Filtration begins immediately and, as the plunger is compressed until it reaches the bottom, the membrane is purged with air for maximum sample recovery. For direct instrument injection, a needle is placed on the Autovial slip-luer outlet.ApplicationAutovial membranes are available for various applications:- Cellulose Acetate (CA): low nonspecific protein binding and high loading capacity membrane for biological solutions
- Glass microfiber (GMF): depth filter for samples in aqueous or organic solutions
- Nylon (NYL): for aqueous and organic samples within a pH range between of 3 to 10
- Polyethersulfone (PES): low non-specific protein binding membrane for samples in aqueous solutions
- Polypropylene (PP): Hydrophobic membrane. Resistant to a wide range of organic solvents
- Polytetrafluorethylene (PTFE): PTFE membrane for samples with > 50% organic solvent
- Polyvinylidene Fluoride (PVDF): low nonspecific protein binding membrane for samples in aqueous solutions and/or organic solvents
Features and BenefitsFeatures and benefits:- Single unit convenience saves time. No assembly required - easier to load
- Choice of filter media. Compatible with a wide range of sample types
- Ideal for hazardous samples. Self contained device eliminates risk of filter pop-off
- Built-in air purge maximizes sample recovery
- Sterile option available to maintain sample integrity
- Unique prefilter design for difficult-to-filter samples (no prefilter in Autovial 5 and in selected Autovial 12)
- Choice of glass fiber or polypropylene prefilters
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAutovials is a trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial Nylon membrane, polypropylene housing sterility non-sterile feature autoclavable (121°C for 20 minutes), cap: no, disposable, graduations packaging pack of 50 Торговая марка Whatman AV125ENAO, Whatman Article No. 28421432 (US reference) capacity 12 mL filter area 3.0 cm2 size pore size 0.2 µm fitting male outlet (Slip-tip) Узнать цену -
Whatman® Autovials™ syringeless filters WHAAV125EAQU
NACRES: NB.24 General descriptionWhatman® Autovial™ Syringeless Filters
Autovial syringeless filters are preassembled filtration devices for removing particulates from samples. They replace syringe-coupled filtration devices with single, disposable units.
Autovial devices are comprised of two parts: a graduated filter barrel and a plunger. The proven design features an integral filter, built-in air purge and a support stand that protects the recessed slip-luer tip. They are available in a 5 mL and 12 mL volume capacity.
The Autovial filter is selected according to membrane compatibility with the sample. In practice, the sample is poured into the 5 mL or 12 mL capacity filter barrel. The plunger is inserted into the barrel until the bottom is securely in place; there is a gap of air between the sample and plunger. Then, the tip of the Autovial is placed into the mouth of an autosampler vial or container and the plunger compressed. Filtration begins immediately and, as the plunger is compressed until it reaches the bottom, the membrane is purged with air for maximum sample recovery. For direct instrument injection, a needle is placed on the Autovial slip-luer outlet.ApplicationAutovial membranes are available for various applications:- Cellulose Acetate (CA): low nonspecific protein binding and high loading capacity membrane for biological solutions
- Glass microfiber (GMF): depth filter for samples in aqueous or organic solutions
- Nylon (NYL): for aqueous and organic samples within a pH range between of 3 to 10
- Polyethersulfone (PES): low non-specific protein binding membrane for samples in aqueous solutions
- Polypropylene (PP): Hydrophobic membrane. Resistant to a wide range of organic solvents
- Polytetrafluorethylene (PTFE): PTFE membrane for samples with > 50% organic solvent
- Polyvinylidene Fluoride (PVDF): low nonspecific protein binding membrane for samples in aqueous solutions and/or organic solvents
Features and BenefitsFeatures and benefits:- Single unit convenience saves time. No assembly required - easier to load
- Choice of filter media. Compatible with a wide range of sample types
- Ideal for hazardous samples. Self contained device eliminates risk of filter pop-off
- Built-in air purge maximizes sample recovery
- Sterile option available to maintain sample integrity
- Unique prefilter design for difficult-to-filter samples (no prefilter in Autovial 5 and in selected Autovial 12)
- Choice of glass fiber or polypropylene prefilters
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAutovials is a trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial PVDF membrane, polypropylene housing sterility non-sterile feature autoclavable (121°C for 20 minutes), cap: no, disposable, graduations packaging pack of 50 Торговая марка Whatman AV125EAQU, Whatman Article No. 28421431 (US reference) capacity 12 mL filter area 3.0 cm2 pore size 0.2 µm fitting male outlet (Slip-tip) Узнать цену -
Whatman® Autovials™ syringeless filters WHAAV125EORG
NACRES: NB.24 General descriptionWhatman® Autovial™ Syringeless Filters
Autovial syringeless filters are preassembled filtration devices for removing particulates from samples. They replace syringe-coupled filtration devices with single, disposable units.
Autovial devices are comprised of two parts: a graduated filter barrel and a plunger. The proven design features an integral filter, built-in air purge and a support stand that protects the recessed slip-luer tip. They are available in a 5 mL and 12 mL volume capacity.
The Autovial filter is selected according to membrane compatibility with the sample. In practice, the sample is poured into the 5 mL or 12 mL capacity filter barrel. The plunger is inserted into the barrel until the bottom is securely in place; there is a gap of air between the sample and plunger. Then, the tip of the Autovial is placed into the mouth of an autosampler vial or container and the plunger compressed. Filtration begins immediately and, as the plunger is compressed until it reaches the bottom, the membrane is purged with air for maximum sample recovery. For direct instrument injection, a needle is placed on the Autovial slip-luer outlet.ApplicationAutovial membranes are available for various applications:- Cellulose Acetate (CA): low nonspecific protein binding and high loading capacity membrane for biological solutions
- Glass microfiber (GMF): depth filter for samples in aqueous or organic solutions
- Nylon (NYL): for aqueous and organic samples within a pH range between of 3 to 10
- Polyethersulfone (PES): low non-specific protein binding membrane for samples in aqueous solutions
- Polypropylene (PP): Hydrophobic membrane. Resistant to a wide range of organic solvents
- Polytetrafluorethylene (PTFE): PTFE membrane for samples with > 50% organic solvent
- Polyvinylidene Fluoride (PVDF): low nonspecific protein binding membrane for samples in aqueous solutions and/or organic solvents
Features and BenefitsFeatures and benefits:- Single unit convenience saves time. No assembly required - easier to load
- Choice of filter media. Compatible with a wide range of sample types
- Ideal for hazardous samples. Self contained device eliminates risk of filter pop-off
- Built-in air purge maximizes sample recovery
- Sterile option available to maintain sample integrity
- Unique prefilter design for difficult-to-filter samples (no prefilter in Autovial 5 and in selected Autovial 12)
- Choice of glass fiber or polypropylene prefilters
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAutovials is a trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial PTFE membrane, polypropylene housing sterility non-sterile feature autoclavable (121°C for 20 minutes), cap: no, disposable, graduations packaging pack of 50 Торговая марка Whatman AV125EORG, Whatman Article No. 28421433 (US reference) capacity 12 mL filter area 3.0 cm2 size pore size 0.2 µm fitting male outlet (Slip-tip) Узнать цену -
Whatman® Autovials™ syringeless filters WHAAV125UNAO
NACRES: NB.24 General descriptionWhatman® Autovial™ Syringeless Filters
Autovial syringeless filters are preassembled filtration devices for removing particulates from samples. They replace syringe-coupled filtration devices with single, disposable units.
Autovial devices are comprised of two parts: a graduated filter barrel and a plunger. The proven design features an integral filter, built-in air purge and a support stand that protects the recessed slip-luer tip. They are available in a 5 mL and 12 mL volume capacity.
The Autovial filter is selected according to membrane compatibility with the sample. In practice, the sample is poured into the 5 mL or 12 mL capacity filter barrel. The plunger is inserted into the barrel until the bottom is securely in place; there is a gap of air between the sample and plunger. Then, the tip of the Autovial is placed into the mouth of an autosampler vial or container and the plunger compressed. Filtration begins immediately and, as the plunger is compressed until it reaches the bottom, the membrane is purged with air for maximum sample recovery. For direct instrument injection, a needle is placed on the Autovial slip-luer outlet.ApplicationAutovial membranes are available for various applications:- Cellulose Acetate (CA): low nonspecific protein binding and high loading capacity membrane for biological solutions
- Glass microfiber (GMF): depth filter for samples in aqueous or organic solutions
- Nylon (NYL): for aqueous and organic samples within a pH range between of 3 to 10
- Polyethersulfone (PES): low non-specific protein binding membrane for samples in aqueous solutions
- Polypropylene (PP): Hydrophobic membrane. Resistant to a wide range of organic solvents
- Polytetrafluorethylene (PTFE): PTFE membrane for samples with > 50% organic solvent
- Polyvinylidene Fluoride (PVDF): low nonspecific protein binding membrane for samples in aqueous solutions and/or organic solvents
Features and BenefitsFeatures and benefits:- Single unit convenience saves time. No assembly required - easier to load
- Choice of filter media. Compatible with a wide range of sample types
- Ideal for hazardous samples. Self contained device eliminates risk of filter pop-off
- Built-in air purge maximizes sample recovery
- Sterile option available to maintain sample integrity
- Unique prefilter design for difficult-to-filter samples (no prefilter in Autovial 5 and in selected Autovial 12)
- Choice of glass fiber or polypropylene prefilters
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAutovials is a trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial Nylon membrane, polypropylene housing sterility non-sterile feature autoclavable (121°C for 20 minutes), cap: no, disposable, graduations packaging pack of 50 Торговая марка Whatman AV125UNAO, Whatman Article No. 28421445 (US reference) capacity 12 mL filter area 3.0 cm2 size pore size 0.45 µm fitting male outlet (Slip-tip) Узнать цену -
Whatman® Autovials™ syringeless filters WHAAV125UAQU
NACRES: NB.24 General descriptionWhatman® Autovial™ Syringeless Filters
Autovial syringeless filters are preassembled filtration devices for removing particulates from samples. They replace syringe-coupled filtration devices with single, disposable units.
Autovial devices are comprised of two parts: a graduated filter barrel and a plunger. The proven design features an integral filter, built-in air purge and a support stand that protects the recessed slip-luer tip. They are available in a 5 mL and 12 mL volume capacity.
The Autovial filter is selected according to membrane compatibility with the sample. In practice, the sample is poured into the 5 mL or 12 mL capacity filter barrel. The plunger is inserted into the barrel until the bottom is securely in place; there is a gap of air between the sample and plunger. Then, the tip of the Autovial is placed into the mouth of an autosampler vial or container and the plunger compressed. Filtration begins immediately and, as the plunger is compressed until it reaches the bottom, the membrane is purged with air for maximum sample recovery. For direct instrument injection, a needle is placed on the Autovial slip-luer outlet.ApplicationAutovial membranes are available for various applications:- Cellulose Acetate (CA): low nonspecific protein binding and high loading capacity membrane for biological solutions
- Glass microfiber (GMF): depth filter for samples in aqueous or organic solutions
- Nylon (NYL): for aqueous and organic samples within a pH range between of 3 to 10
- Polyethersulfone (PES): low non-specific protein binding membrane for samples in aqueous solutions
- Polypropylene (PP): Hydrophobic membrane. Resistant to a wide range of organic solvents
- Polytetrafluorethylene (PTFE): PTFE membrane for samples with > 50% organic solvent
- Polyvinylidene Fluoride (PVDF): low nonspecific protein binding membrane for samples in aqueous solutions and/or organic solvents
Features and BenefitsFeatures and benefits:- Single unit convenience saves time. No assembly required - easier to load
- Choice of filter media. Compatible with a wide range of sample types
- Ideal for hazardous samples. Self contained device eliminates risk of filter pop-off
- Built-in air purge maximizes sample recovery
- Sterile option available to maintain sample integrity
- Unique prefilter design for difficult-to-filter samples (no prefilter in Autovial 5 and in selected Autovial 12)
- Choice of glass fiber or polypropylene prefilters
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAutovials is a trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial PVDF membrane, polypropylene housing sterility non-sterile feature autoclavable (121°C for 20 minutes), cap: no, disposable, graduations packaging pack of 50 Торговая марка Whatman AV125UAQU, Whatman Article No. 28421442 (US reference) capacity 12 mL filter area 3.0 cm2 pore size 0.45 µm fitting male outlet (Slip-tip) Узнать цену -
Whatman® Autovials™ syringeless filters WHAAV125UORG
NACRES: NB.24 General descriptionWhatman® Autovial™ Syringeless Filters
Autovial syringeless filters are preassembled filtration devices for removing particulates from samples. They replace syringe-coupled filtration devices with single, disposable units.
Autovial devices are comprised of two parts: a graduated filter barrel and a plunger. The proven design features an integral filter, built-in air purge and a support stand that protects the recessed slip-luer tip. They are available in a 5 mL and 12 mL volume capacity.
The Autovial filter is selected according to membrane compatibility with the sample. In practice, the sample is poured into the 5 mL or 12 mL capacity filter barrel. The plunger is inserted into the barrel until the bottom is securely in place; there is a gap of air between the sample and plunger. Then, the tip of the Autovial is placed into the mouth of an autosampler vial or container and the plunger compressed. Filtration begins immediately and, as the plunger is compressed until it reaches the bottom, the membrane is purged with air for maximum sample recovery. For direct instrument injection, a needle is placed on the Autovial slip-luer outlet.ApplicationAutovial membranes are available for various applications:- Cellulose Acetate (CA): low nonspecific protein binding and high loading capacity membrane for biological solutions
- Glass microfiber (GMF): depth filter for samples in aqueous or organic solutions
- Nylon (NYL): for aqueous and organic samples within a pH range between of 3 to 10
- Polyethersulfone (PES): low non-specific protein binding membrane for samples in aqueous solutions
- Polypropylene (PP): Hydrophobic membrane. Resistant to a wide range of organic solvents
- Polytetrafluorethylene (PTFE): PTFE membrane for samples with > 50% organic solvent
- Polyvinylidene Fluoride (PVDF): low nonspecific protein binding membrane for samples in aqueous solutions and/or organic solvents
Features and BenefitsFeatures and benefits:- Single unit convenience saves time. No assembly required - easier to load
- Choice of filter media. Compatible with a wide range of sample types
- Ideal for hazardous samples. Self contained device eliminates risk of filter pop-off
- Built-in air purge maximizes sample recovery
- Sterile option available to maintain sample integrity
- Unique prefilter design for difficult-to-filter samples (no prefilter in Autovial 5 and in selected Autovial 12)
- Choice of glass fiber or polypropylene prefilters
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAutovials is a trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial PTFE membrane, polypropylene housing sterility non-sterile feature autoclavable (121°C for 20 minutes), cap: no, disposable, graduations packaging pack of 50 Торговая марка Whatman AV125UORG, Whatman Article No. 28421446 (US reference) capacity 12 mL filter area 3.0 cm2 size pore size 0.45 µm fitting male outlet (Slip-tip) Узнать цену -
Whatman® Autovials™ syringeless filters WHAAV115NPUORG
NACRES: NB.24 General descriptionWhatman® Autovial™ Syringeless Filters
Autovial syringeless filters are preassembled filtration devices for removing particulates from samples. They replace syringe-coupled filtration devices with single, disposable units.
Autovial devices are comprised of two parts: a graduated filter barrel and a plunger. The proven design features an integral filter, built-in air purge and a support stand that protects the recessed slip-luer tip. They are available in a 5 mL and 12 mL volume capacity.
The Autovial filter is selected according to membrane compatibility with the sample. In practice, the sample is poured into the 5 mL or 12 mL capacity filter barrel. The plunger is inserted into the barrel until the bottom is securely in place; there is a gap of air between the sample and plunger. Then, the tip of the Autovial is placed into the mouth of an autosampler vial or container and the plunger compressed. Filtration begins immediately and, as the plunger is compressed until it reaches the bottom, the membrane is purged with air for maximum sample recovery. For direct instrument injection, a needle is placed on the Autovial slip-luer outlet.ApplicationAutovial membranes are available for various applications:- Cellulose Acetate (CA): low nonspecific protein binding and high loading capacity membrane for biological solutions
- Glass microfiber (GMF): depth filter for samples in aqueous or organic solutions
- Nylon (NYL): for aqueous and organic samples within a pH range between of 3 to 10
- Polyethersulfone (PES): low non-specific protein binding membrane for samples in aqueous solutions
- Polypropylene (PP): Hydrophobic membrane. Resistant to a wide range of organic solvents
- Polytetrafluorethylene (PTFE): PTFE membrane for samples with > 50% organic solvent
- Polyvinylidene Fluoride (PVDF): low nonspecific protein binding membrane for samples in aqueous solutions and/or organic solvents
Features and BenefitsFeatures and benefits:- Single unit convenience saves time. No assembly required - easier to load
- Choice of filter media. Compatible with a wide range of sample types
- Ideal for hazardous samples. Self contained device eliminates risk of filter pop-off
- Built-in air purge maximizes sample recovery
- Sterile option available to maintain sample integrity
- Unique prefilter design for difficult-to-filter samples (no prefilter in Autovial 5 and in selected Autovial 12)
- Choice of glass fiber or polypropylene prefilters
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAutovials is a trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial PTFE membrane, polypropylene housing sterility non-sterile feature autoclavable (121°C for 20 minutes), cap: no, disposable, graduations, Filter area 1.7 cm2 packaging pack of 50 Торговая марка Whatman AV115NPUORG, Whatman Article No. 28421425 (US reference) filter capacity 5 mL pore size 0.45 µm fitting male outlet (Slip-tip) Узнать цену -
Whatman® Autovials™ syringeless filters WHAAV125NPUAQU
NACRES: NB.24 General descriptionWhatman® Autovial™ Syringeless Filters
Autovial syringeless filters are preassembled filtration devices for removing particulates from samples. They replace syringe-coupled filtration devices with single, disposable units.
Autovial devices are comprised of two parts: a graduated filter barrel and a plunger. The proven design features an integral filter, built-in air purge and a support stand that protects the recessed slip-luer tip. They are available in a 5 mL and 12 mL volume capacity.
The Autovial filter is selected according to membrane compatibility with the sample. In practice, the sample is poured into the 5 mL or 12 mL capacity filter barrel. The plunger is inserted into the barrel until the bottom is securely in place; there is a gap of air between the sample and plunger. Then, the tip of the Autovial is placed into the mouth of an autosampler vial or container and the plunger compressed. Filtration begins immediately and, as the plunger is compressed until it reaches the bottom, the membrane is purged with air for maximum sample recovery. For direct instrument injection, a needle is placed on the Autovial slip-luer outlet.ApplicationAutovial membranes are available for various applications:- Cellulose Acetate (CA): low nonspecific protein binding and high loading capacity membrane for biological solutions
- Glass microfiber (GMF): depth filter for samples in aqueous or organic solutions
- Nylon (NYL): for aqueous and organic samples within a pH range between of 3 to 10
- Polyethersulfone (PES): low non-specific protein binding membrane for samples in aqueous solutions
- Polypropylene (PP): Hydrophobic membrane. Resistant to a wide range of organic solvents
- Polytetrafluorethylene (PTFE): PTFE membrane for samples with > 50% organic solvent
- Polyvinylidene Fluoride (PVDF): low nonspecific protein binding membrane for samples in aqueous solutions and/or organic solvents
Features and BenefitsFeatures and benefits:- Single unit convenience saves time. No assembly required - easier to load
- Choice of filter media. Compatible with a wide range of sample types
- Ideal for hazardous samples. Self contained device eliminates risk of filter pop-off
- Built-in air purge maximizes sample recovery
- Sterile option available to maintain sample integrity
- Unique prefilter design for difficult-to-filter samples (no prefilter in Autovial 5 and in selected Autovial 12)
- Choice of glass fiber or polypropylene prefilters
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAutovials is a trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial PVDF membrane, polypropylene housing sterility non-sterile feature autoclavable (121°C for 20 minutes), cap: no, disposable, graduations, Filter area 3 cm2 packaging pack of 50 Торговая марка Whatman AV125NPUAQU, Whatman Article No. 28421435 (US reference) filter capacity 12 mL pore size 0.45 µm fitting male outlet (Slip-tip) Узнать цену -
Whatman® Autovials™ syringeless filters WHAAV125EPP
NACRES: NB.24 General descriptionWhatman® Autovial™ Syringeless Filters
Autovial syringeless filters are preassembled filtration devices for removing particulates from samples. They replace syringe-coupled filtration devices with single, disposable units.
Autovial devices are comprised of two parts: a graduated filter barrel and a plunger. The proven design features an integral filter, built-in air purge and a support stand that protects the recessed slip-luer tip. They are available in a 5 mL and 12 mL volume capacity.
The Autovial filter is selected according to membrane compatibility with the sample. In practice, the sample is poured into the 5 mL or 12 mL capacity filter barrel. The plunger is inserted into the barrel until the bottom is securely in place; there is a gap of air between the sample and plunger. Then, the tip of the Autovial is placed into the mouth of an autosampler vial or container and the plunger compressed. Filtration begins immediately and, as the plunger is compressed until it reaches the bottom, the membrane is purged with air for maximum sample recovery. For direct instrument injection, a needle is placed on the Autovial slip-luer outlet.ApplicationAutovial membranes are available for various applications:- Cellulose Acetate (CA): low nonspecific protein binding and high loading capacity membrane for biological solutions
- Glass microfiber (GMF): depth filter for samples in aqueous or organic solutions
- Nylon (NYL): for aqueous and organic samples within a pH range between of 3 to 10
- Polyethersulfone (PES): low non-specific protein binding membrane for samples in aqueous solutions
- Polypropylene (PP): Hydrophobic membrane. Resistant to a wide range of organic solvents
- Polytetrafluorethylene (PTFE): PTFE membrane for samples with > 50% organic solvent
- Polyvinylidene Fluoride (PVDF): low nonspecific protein binding membrane for samples in aqueous solutions and/or organic solvents
Features and BenefitsFeatures and benefits:- Single unit convenience saves time. No assembly required - easier to load
- Choice of filter media. Compatible with a wide range of sample types
- Ideal for hazardous samples. Self contained device eliminates risk of filter pop-off
- Built-in air purge maximizes sample recovery
- Sterile option available to maintain sample integrity
- Unique prefilter design for difficult-to-filter samples (no prefilter in Autovial 5 and in selected Autovial 12)
- Choice of glass fiber or polypropylene prefilters
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAutovials is a trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial polypropylene housing, polypropylene membrane (with PP pre-filter) sterility non-sterile feature autoclavable (121°C for 20 minutes), cap: no, disposable, graduations, Filter area 3 cm2 packaging pack of 50 Торговая марка Whatman AV125EPP, Whatman Article No. 28421434 (US reference) filter capacity 12 mL pore size 0.2 µm fitting male outlet (Slip-tip) Узнать цену -
Whatman® Autovials™ syringeless filters WHAAV125UGMF
NACRES: NB.24 General descriptionWhatman® Autovial™ Syringeless Filters
Autovial syringeless filters are preassembled filtration devices for removing particulates from samples. They replace syringe-coupled filtration devices with single, disposable units.
Autovial devices are comprised of two parts: a graduated filter barrel and a plunger. The proven design features an integral filter, built-in air purge and a support stand that protects the recessed slip-luer tip. They are available in a 5 mL and 12 mL volume capacity.
The Autovial filter is selected according to membrane compatibility with the sample. In practice, the sample is poured into the 5 mL or 12 mL capacity filter barrel. The plunger is inserted into the barrel until the bottom is securely in place; there is a gap of air between the sample and plunger. Then, the tip of the Autovial is placed into the mouth of an autosampler vial or container and the plunger compressed. Filtration begins immediately and, as the plunger is compressed until it reaches the bottom, the membrane is purged with air for maximum sample recovery. For direct instrument injection, a needle is placed on the Autovial slip-luer outlet.ApplicationAutovial membranes are available for various applications:- Cellulose Acetate (CA): low nonspecific protein binding and high loading capacity membrane for biological solutions
- Glass microfiber (GMF): depth filter for samples in aqueous or organic solutions
- Nylon (NYL): for aqueous and organic samples within a pH range between of 3 to 10
- Polyethersulfone (PES): low non-specific protein binding membrane for samples in aqueous solutions
- Polypropylene (PP): Hydrophobic membrane. Resistant to a wide range of organic solvents
- Polytetrafluorethylene (PTFE): PTFE membrane for samples with > 50% organic solvent
- Polyvinylidene Fluoride (PVDF): low nonspecific protein binding membrane for samples in aqueous solutions and/or organic solvents
Features and BenefitsFeatures and benefits:- Single unit convenience saves time. No assembly required - easier to load
- Choice of filter media. Compatible with a wide range of sample types
- Ideal for hazardous samples. Self contained device eliminates risk of filter pop-off
- Built-in air purge maximizes sample recovery
- Sterile option available to maintain sample integrity
- Unique prefilter design for difficult-to-filter samples (no prefilter in Autovial 5 and in selected Autovial 12)
- Choice of glass fiber or polypropylene prefilters
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAutovials is a trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial glass microfiber membrane (With glass pre-filter), polypropylene housing sterility non-sterile feature autoclavable (121°C for 20 minutes), cap: no, disposable, graduations, Filter area 3 cm2 packaging pack of 50 Торговая марка Whatman AV125UGMF, Whatman Article No. 28421444 (US reference) filter capacity 12 mL pore size 0.45 µm fitting male outlet (Slip-tip) Узнать цену -
Whatman® Autovials™ syringeless filters WHAAV525UORG
NACRES: NB.24 General descriptionWhatman® Autovial™ Syringeless Filters
Autovial syringeless filters are preassembled filtration devices for removing particulates from samples. They replace syringe-coupled filtration devices with single, disposable units.
Autovial devices are comprised of two parts: a graduated filter barrel and a plunger. The proven design features an integral filter, built-in air purge and a support stand that protects the recessed slip-luer tip. They are available in a 5 mL and 12 mL volume capacity.
The Autovial filter is selected according to membrane compatibility with the sample. In practice, the sample is poured into the 5 mL or 12 mL capacity filter barrel. The plunger is inserted into the barrel until the bottom is securely in place; there is a gap of air between the sample and plunger. Then, the tip of the Autovial is placed into the mouth of an autosampler vial or container and the plunger compressed. Filtration begins immediately and, as the plunger is compressed until it reaches the bottom, the membrane is purged with air for maximum sample recovery. For direct instrument injection, a needle is placed on the Autovial slip-luer outlet.ApplicationAutovial membranes are available for various applications:- Cellulose Acetate (CA): low nonspecific protein binding and high loading capacity membrane for biological solutions
- Glass microfiber (GMF): depth filter for samples in aqueous or organic solutions
- Nylon (NYL): for aqueous and organic samples within a pH range between of 3 to 10
- Polyethersulfone (PES): low non-specific protein binding membrane for samples in aqueous solutions
- Polypropylene (PP): Hydrophobic membrane. Resistant to a wide range of organic solvents
- Polytetrafluorethylene (PTFE): PTFE membrane for samples with > 50% organic solvent
- Polyvinylidene Fluoride (PVDF): low nonspecific protein binding membrane for samples in aqueous solutions and/or organic solvents
Features and BenefitsFeatures and benefits:- Single unit convenience saves time. No assembly required - easier to load
- Choice of filter media. Compatible with a wide range of sample types
- Ideal for hazardous samples. Self contained device eliminates risk of filter pop-off
- Built-in air purge maximizes sample recovery
- Sterile option available to maintain sample integrity
- Unique prefilter design for difficult-to-filter samples (no prefilter in Autovial 5 and in selected Autovial 12)
- Choice of glass fiber or polypropylene prefilters
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAutovials is a trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial PTFE membrane (With glass pre-filter), polypropylene housing sterility non-sterile feature autoclavable (121°C for 20 minutes), cap: no, disposable, graduations, Filter area 3 cm2 packaging pack of 1000 Торговая марка Whatman AV525UORG, Whatman Article No. 28421453 (US reference) filter capacity 12 mL pore size 0.45 µm fitting male outlet (Slip-tip) Узнать цену -
Whatman® Autovials™ syringeless filters WHAAV115NPEORG
NACRES: NB.24 General descriptionWhatman® Autovial™ Syringeless Filters
Autovial syringeless filters are preassembled filtration devices for removing particulates from samples. They replace syringe-coupled filtration devices with single, disposable units.
Autovial devices are comprised of two parts: a graduated filter barrel and a plunger. The proven design features an integral filter, built-in air purge and a support stand that protects the recessed slip-luer tip. They are available in a 5 mL and 12 mL volume capacity.
The Autovial filter is selected according to membrane compatibility with the sample. In practice, the sample is poured into the 5 mL or 12 mL capacity filter barrel. The plunger is inserted into the barrel until the bottom is securely in place; there is a gap of air between the sample and plunger. Then, the tip of the Autovial is placed into the mouth of an autosampler vial or container and the plunger compressed. Filtration begins immediately and, as the plunger is compressed until it reaches the bottom, the membrane is purged with air for maximum sample recovery. For direct instrument injection, a needle is placed on the Autovial slip-luer outlet.ApplicationAutovial membranes are available for various applications:- Cellulose Acetate (CA): low nonspecific protein binding and high loading capacity membrane for biological solutions
- Glass microfiber (GMF): depth filter for samples in aqueous or organic solutions
- Nylon (NYL): for aqueous and organic samples within a pH range between of 3 to 10
- Polyethersulfone (PES): low non-specific protein binding membrane for samples in aqueous solutions
- Polypropylene (PP): Hydrophobic membrane. Resistant to a wide range of organic solvents
- Polytetrafluorethylene (PTFE): PTFE membrane for samples with > 50% organic solvent
- Polyvinylidene Fluoride (PVDF): low nonspecific protein binding membrane for samples in aqueous solutions and/or organic solvents
Features and BenefitsFeatures and benefits:- Single unit convenience saves time. No assembly required - easier to load
- Choice of filter media. Compatible with a wide range of sample types
- Ideal for hazardous samples. Self contained device eliminates risk of filter pop-off
- Built-in air purge maximizes sample recovery
- Sterile option available to maintain sample integrity
- Unique prefilter design for difficult-to-filter samples (no prefilter in Autovial 5 and in selected Autovial 12)
- Choice of glass fiber or polypropylene prefilters
Other NotesField of Use : For internal research use only. Products are not intended for diagnostic use or resale.Legal InformationAutovials is a trademark of Whatman International Ltd.
Whatman is a registered trademark of CytivaПараметрыmaterial PTFE membrane, polypropylene housing sterility non-sterile feature autoclavable (121°C for 20 minutes), cap: no, disposable, graduations, Filter area 1.7 cm2 packaging pack of 50 Торговая марка Whatman AV115NPEORG, Whatman Article No. 28421422 (US reference) filter capacity 5 mL pore size 0.2 µm fitting male outlet (Slip-tip) Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
