Isopore Membrane Filter DTTP01300

eCl@ss:	32031602
NACRES:	NB.24

Filter Code: DTTP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
0.6 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameter
Possible reduction in flow rates may occur after autoclaving.
ISOPORE is a trademark of Merck KGaA, Darmstadt, Germany

material	plain filter, polycarbonate membrane, white filter
sterility	non-sterile
feature	hydrophilic
Торговая марка	Isopore™, Millipore
parameter	10 L/min-cm2-psi air flow rate, 140 °C max. temp., 62 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~43 mL/min-cm2 water flow rate at 10 psi (typical results)
filter diam.	13 mm
thickness	25 µm
gravimetric extractables	<1%
refractive index	n/D 1.6
matrix	Isopore™
pore size	0.6 µm pore size, 5-20 % porosity
bubble point	1.52 bar, air with water at 23 °C
shipped in	ambient