Glassware Millipore
- Сортировать:
- Вид таблицей
-
Millipore All-Glass Filter Holder - Kit XX1514700
eCl@ss: 32031613 General descriptionMillipore All-Glass Filter Holders - Kit
47 mm, Glass frit membrane support, 300 mL Funnel
The Millipore All-Glass Filter Holder was designed for the filtration or aqueous and organic or corrosive liquids for particulate contamination analysis. The holder can also be used for HPLC solvent preparation. The vacuum connection is integrated into the filter holder base and flask cap, above the filtrate exit level. With this design, you can avoid unintentionally drawing filtrate into vacuum tubing. This design also allows simple transfer of filtrate (i.e., HPLC solvents) by pouring from the receiver flask.
This item is a Kit composed of the following items:
(Catalog Number - Description)
XX1014704 - Millipore Glass funnel, 300 mL, 47 mm, Borosilicate, Ground glass seal
XX1014703 - Millipore Spring Clamp, 47 mm, Aluminum
XX1514702 - Millipore Glass Base and Cap, 47 mm, Glass frit support
XX1514705 - Millipore Ground Joint Flask, 1L
Features & Benefits:- All-Glass construction has broad chemical compatibility
- Borosilicate glass parts contact liquid, with ground-glass sealing surfaces
- Vacuum connection to flask cap simplifies transfer of filtrate
Applications:
Particle Contamination Analysis, HPLC Solvent Filtration, General Filtration and ClarificationApplication47 mm, Glass frit membrane support, 300 mL funnelPrincipleVacuumПараметрыQuality Level 100, material anodized aluminum spring clamp(s), borosilicate glass base, borosilicate glass funnel(s), fritted glass support (for filter), silicone sleeve (for alignment), tubulated borosilicate glass cap application(s) filtration: suitable H 43 cm filter diam. 47 mm filtration area 9.6 cm2 flask capacity 1 L flask diam. 13.7 cm funnel capacity 300 mL funnel diam. 7.6 cm fitting inlet funnel, 6 mm (1/4 in.) O.D. outlet tubulated cap sidearm for vacuum compatibility for use with All-Glass Filter Holder shipped in ambient 898,50 € / 85 379 ₽Получить предложение -
Millipore All-Glass Filter Holder - Kit XX1019020
eCl@ss: 32031613 General descriptionMillipore All-Glass Filter Holders - Kit
90 mm, Stainless steel screen membrane support, 1L Funnel
The Millipore All-Glass Filter Holder was designed for the filtration of aqueous and organic or corrosive liquids for particulate contamination analysis. The holder can also be used for HPLC solvent preparation. The vacuum connection is integrated into the filter holder base and flask cap, above the filtrate exit level. With this design, you can avoid unintentionally drawing filtrate into vacuum tubing. This design also allows simple transfer of filtrate (i.e., HPLC solvents) by pouring from the receiver flask.
This item is a Kit composed of the following items:
(Catalog Number - Description)
XX1019000 - Millipore Glass funnel, 1L, 90 mm, Borosilicate, Ground glass seal
XX1019003 - Millipore Spring Clamp, 90 mm, Aluminum
XX1019004 - Millipore Glass Base and Cap, 90 mm, For use with stainless steel screen support, Screen sold separately
XX1009002 - Millipore Stainless Steel Support Screen, 90 mm
XX1009010 - Millipore PTFE Gaskets, 90 mm, 10/PK
Features & Benefits:
• All-Glass construction has broad chemical compatibility
• Borosilicate glass parts contact liquid, with ground-glass sealing surfaces
• Vacuum connection to flask cap simplifies transfer of filtrate
Applications:
Particle Contamination Analysis, HPLC Solvent Filtration, General Filtration and ClarificationPrincipleVacuumПараметрыmaterial PTFE seal, PTFE-coated screen, anodized aluminum spring clamp(s), borosilicate glass base, borosilicate glass funnel(s), stainless steel screen, tubulated borosilicate glass cap application(s) filtration: suitable filter diam. 90 mm filtration area 45.5 cm2 funnel capacity 1 L fitting inlet funnel, 6 mm (1/4 in.) O.D. outlet tubulated cap sidearm for vacuum compatibility for use with All-Glass Filter Holder shipped in ambient 1 905,00 € / 181 021 ₽Получить предложение -
Millipore All-Glass Filter Holder - Kit XX5514700
eCl@ss: 32031613 General descriptionMillipore All-Glass Filter Holders - Kit
47 mm, Glass frit membrane support, 300 mL Funnel
The Millipore All-Glass Filter Holder was designed for the filtration of aqueous and organic or corrosive liquids for particulate contamination analysis. The holder can also be used for HPLC solvent preparation. The vacuum connection is integrated into the filter holder base and flask cap, above the filtrate exit level. With this design, you can avoid unintentionally drawing filtrate into vacuum tubing. This design also allows simple transfer of filtrate (i.e., HPLC solvents) by pouring from the receiver flask.
This item is a Kit composed of the following items:
(Catalog Number - Description)
XX5014704 - Millipore Glass funnel, 500 mL, 47 mm, Borosilicate, Ground glass seal
XX1014703 - Millipore Spring Clamp, 47 mm, Aluminum
XX1514702 - Millipore Glass Base and Cap, 47 mm, Glass frit support
XX1514705 - Millipore Ground Joint Flask, 1L
ALIGNED05 - Millipore Alignment Guide, 47 mm, 5/PK
Features & Benefits:
• All-Glass construction has broad chemical compatibility
• Borosilicate glass parts contact liquid, with ground-glass sealing surfaces
• Vacuum connection to flask cap simplifies transfer of filtrate
Applications:
Particle Contamination Analysis, HPLC Solvent Filtration, General Filtration and ClarificationApplication47 mm, Glass frit membrane support, 500 mL funnelPrincipleVacuumПараметрыQuality Level 100, material anodized aluminum spring clamp(s), borosilicate glass base, borosilicate glass funnel(s), fritted glass support (for filter), silicone sleeve (for alignment), tubulated borosilicate glass cap application(s) filtration: suitable H 43 cm filter diam. 47 mm filtration area 9.6 cm2 flask capacity 1 L flask diam. 13.7 cm funnel capacity 300 mL funnel diam. 8.0 cm fitting inlet funnel, 6 mm (1/4 in.) O.D. outlet tubulated cap sidearm for vacuum compatibility for use with All-Glass Filter Holder shipped in ambient 985,50 € / 93 646 ₽Получить предложение -
Millipore All-Glass Filter Holder - Kit XX1019022
eCl@ss: 32031613 General descriptionMillipore All-Glass Filter Holders - Kit
90 mm, Glass frit membrane support, 1L Funnel
The Millipore All-Glass Filter Holder was designed for the filtration of aqueous and organic or corrosive liquids for particulate contamination analysis. The holder can also be used for HPLC solvent preparation. The vacuum connection is integrated into the filter holder base and flask cap, above the filtrate exit level. With this design, you can avoid unintentionally drawing filtrate into vacuum tubing. This design also allows simple transfer of filtrate (i.e., HPLC solvents) by pouring from the receiver flask.
This item is a Kit composed of the following items:
(Catalog Number - Description)
XX1019000 - Millipore Glass funnel, 1L, 90 mm, Borosilicate, Ground glass seal
XX1019003 - Millipore Spring Clamp, 90 mm, Aluminum
XX1519002 - Millipore Glass Base and Cap, 90 mm, Glass frit support
Features & Benefits:
• All-Glass construction has broad chemical compatibility
• Borosilicate glass parts contact liquid, with ground-glass sealing surfaces
• Vacuum connection to flask cap simplifies transfer of filtrate
Applications:
Particle Contamination Analysis, HPLC Solvent Filtration, General Filtration and ClarificationPrincipleVacuumПараметрыmaterial PTFE seal, anodized aluminum spring clamp(s), borosilicate glass base, borosilicate glass funnel(s), tubulated borosilicate glass cap application(s) filtration: suitable filter diam. 90 mm filtration area 45.5 cm2 funnel capacity 1 L fitting inlet funnel, 6 mm (1/4 in.) O.D. outlet tubulated cap sidearm for vacuum compatibility for use with All-Glass Filter Holder shipped in ambient 1 935,00 € / 183 871 ₽Получить предложение -
Millipore Analytical Stainless Steel Filter Holder for Vacuum Filtration - Kit XX1012540
eCl@ss: 32031613 General descriptionMillipore Analytical Stainless Steel Filter Holders - Kit
25 mm, Stainless steel funnel with glass membrane support, 50 mL funnel
The analytical stainless steel filter holders are designed for the vacuum filtration of samples for bacteriological or particulate contamination analysis.
This item is a Kit composed of the following items:
(Catalog Number - Description)
XX1012542 - Millipore Glass Base and Stopper, 25 mm, Stainless Steel Support, Screen Provided
XX1012503 - Millipore Spring Clamp, 25 mm, Aluminum
ALIGNED25 - Millipore Alignment Guide, 25 mm, 5/PK
Features & Benefits:
• Available in three diameters with four available funnel sizes to accommodate samples up to 250 mL
• Holder with 250 mL funnel is equipped with a funnel lid, which can be vented using accessory filter unit
• Can be autoclaved or flame-sterilized
Applications:
Bacteriological or Particulate Contamination AnalysisPrincipleVacuumПараметрыmaterial PTFE seal, anodized aluminum spring clamp(s), borosilicate glass base, parylene coating (on stopper), silicone guide(s) (for alignment), silicone stopper, stainless steel funnel(s), stainless steel support screen(s) application(s) filtration: suitable H 12.6 cm diam. 5.1 cm (2.0 in.) filter diam. 25 mm filtration area 2.8 cm2 funnel capacity 50 mL fitting inlet funnel, No. 8 outlet stopper for standard 1 L filtering flask (perforated silicone) compatibility for use with Analytical Stainless Steel Filter Holder shipped in ambient 1 320,00 € / 125 432 ₽Получить предложение -
Millipore Base and Cap for Vacuum Filtration XX1514702
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass Base and Cap, 47 mm, Glass frit support
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 47 mm All-Glass Filter Holders Kits and Millipore MilliSolve Kit.Application47 mm, Glass frit supportПараметрыmaterial borosilicate glass base, tubulated borosilicate glass cap application(s) filtration: suitable diam. 47 mm filtration area 9.6 cm2 fitting 6 mm (1/4 in.) O.D. outlet tubulated cap sidearm for vacuum shipped in ambient 743,14 € / 70 616 ₽Получить предложение -
Millipore Base and Cap for Vacuum Filtration XX1019004
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass Base and Cap, 90 mm, For use with stainless steel screen support, Screen sold separately
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 90 mm All-Glass Filter Holders Kits.Application90 mm, For use with stainless steel screen support, Screen sold separatelyПараметрыmaterial borosilicate glass base, tubulated borosilicate glass cap application(s) filtration: suitable diam. 90 mm fitting 6 mm (1/4 in.) O.D. outlet tubulated cap sidearm for vacuum shipped in ambient 655,50 € / 62 288 ₽Получить предложение -
Millipore Base and Cap for Vacuum Filtration XX1514732
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass Base and Cap, 47 mm, For use with stainless steel screen support, Screen provided
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 47 mm All-Glass Filter Holders Kits.Application47 mm, For use with stainless steel screen support, Screen providedПараметрыmaterial borosilicate glass base, stainless steel screen, tubulated borosilicate glass cap application(s) filtration: suitable diam. 47 mm filtration area 9.6 cm2 fitting 6 mm (1/4 in.) O.D. outlet tubulated cap sidearm for vacuum shipped in ambient 719,60 € / 68 379 ₽Получить предложение -
Millipore Classic Glass Filter Holder - Kit XX1014700
eCl@ss: 32031613 General descriptionMillipore Classic Glass Filter Holders - Kit
47 mm, Glass frit membrane support, 300 mL funnel
The Classic Glass Filter Holder is an essential tool for every research lab. The holders multipurpose design is appropriate for a variety of applications and is available in three different support materials for compatibility with your specific application needs.
This item is a Kit composed of the following items:
(Catalog Number - Description)
XX1014704 - Millipore Glass funnel, 300 mL, 47 mm, Borosilicate, Ground glass seal
XX1014703 - Millipore Spring Clamp, 47 mm, Aluminum
XX1014702 - Millipore Glass Base and Stopper, 47 mm, Glass frit membrane support
ALIGNED05 - Millipore Alignment Guide, 47 mm, 5/PK
Features & Benefits:
• Designed for easy loading and removal of membranes
• Three membrane support materials options to suit a variety of applications
• UV sterilize or autoclave with filter in place for bacteriological analysis
Applications:
General Filtration and Clarification, Bacteriological Analysis, Particulate Contamination Analysis of Oils and Hydraulic Fluids, Exfoliative CytologyApplication47 mm, Glass frit membrane support, 300 mL funnelPrincipleVacuumPreparation NoteSterilization Method
UV sterilize or autoclave without filter in-placeПараметрыQuality Level 100, material anodized aluminum spring clamp(s), borosilicate glass base, borosilicate glass funnel(s), glass seal, silicone sleeve (for alignment), silicone stopper (parylene treated) application(s) filtration: suitable H 22.9 cm diam. 7.6 cm filter diam. 47 mm filtration area 9.6 cm2 funnel capacity 300 mL fitting inlet funnel, No. 8 outlet stopper for standard 1 L and 4 L filtering flasks (perforated silicone) compatibility for use with Classic Glass Filter Holder shipped in ambient 406,50 € / 38 627 ₽Получить предложение -
Millipore Classic Glass Filter Holder - Kit XX1014730
eCl@ss: 32031613 General descriptionMillipore Classic Glass Filter Holders - Kit
47 mm, Stainless steel screen membrane support, 300 mL funnel
The Classic Glass Filter Holder is an essential tool for every research lab. The holders multipurpose design is appropriate for a variety of applications and is available in three different support materials for compatibility with your specific application needs.
This item is a Kit composed of the following items:
(Catalog Number - Description)
XX1014704 - Millipore Glass funnel, 300 mL, 47 mm, Borosilicate, Ground glass seal
XX1014703 - Millipore Spring Clamp, 47 mm, Aluminum
XX1014732 - Millipore Glass Base and Stopper, 47 mm, For use with stainless steel screen support, Screen provided
ALIGNED05 - Millipore Alignment Guide, 47 mm, 5/PK
Features & Benefits:
• Designed for easy loading and removal of membranes
• Three membrane support materials options to suit a variety of applications
• UV sterilize or autoclave with filter in place for bacteriological analysis
Applications:
General Filtration and Clarification, Bacteriological Analysis, Particulate Contamination Analysis of Oils and Hydraulic Fluids, Exfoliative CytologyПараметрыQuality Level 100, material anodized aluminum spring clamp(s), borosilicate glass base, borosilicate glass funnel(s), glass seal, parylene coating (on stopper), silicone sleeve (for alignment), silicone stopper application(s) filtration: suitable H 22.9 cm diam. 7.6 cm filter diam. 47 mm filtration area 9.6 cm2 fitting inlet funnel, No. 8 outlet stopper for standard 1 L and 4 L filtering flasks (perforated silicone) compatibility for use with Classic Glass Filter Holder shipped in ambient 552,00 € / 52 453 ₽Получить предложение -
Millipore Classic Glass Filter Holder - Kit XX1014720
eCl@ss: 32031613 General descriptionClassic Glass Filter Holders - Kit
47 mm, PTFE-coated membrane support, 300 mL funnel
The Classic Glass Filter Holder is an essential tool for every research lab. The holders multipurpose design is appropriate for a variety of applications and is available in three different support materials for compatibility with your specific application needs.
This item is a kit composed of the following items:
(Catalog Number - Description)
XX1014724 - Millipore Glass funnel, 300 mL, 47 mm, Borosilicate, PTFE-faced
XX1014703 - Millipore Spring Clamp, 47 mm, Aluminum
XX1014722 - Millipore Glass Base and Stopper, 47 mm, PTFE-faced membrane support
ALIGNED05 - Millipore Alignment Guide, 47 mm, 5/PK
Features & Benefits:
• Designed for easy loading and removal of membranes
• Three membrane support materials options to suit a variety of applications
• UV sterilize or autoclave with filter in place for bacteriological analysis
Applications:
General Filtration and Clarification, Bacteriological Analysis, Particulate Contamination Analysis of Oils and Hydraulic Fluids, Exfoliative CytologyPrincipleVacuumPreparation NoteSterilization Method
Autoclave with filter in-placeПараметрыmaterial PTFE seal, anodized aluminum spring clamp(s), borosilicate glass base, borosilicate glass funnel(s), parylene coating (on stopper), silicone sleeve (for alignment), silicone stopper Quality Level 100, application(s) filtration: suitable H 22.9 cm diam. 7.6 cm filter diam. 47 mm filtration area 9.6 cm2 funnel capacity 300 mL , accessory 1 L is available prefilter diam. 35 mm , thick depth prefilter, 47 mm , membrane prefilter fitting inlet funnel, No. 8 outlet stopper for standard 1 L and 4 L filtering flasks (perforated silicone) compatibility for use with Classic Glass Filter Holder shipped in ambient 538,50 € / 51 170 ₽Получить предложение -
Millipore Glass Base and Stopper for Vacuum Filtration XX1014702
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass Base and Stopper, 47 mm, Glass frit membrane support
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits.Параметрыmaterial borosilicate glass base, parylene coating (on stopper), silicone stopper application(s) filtration: suitable L 10.2 cm diam. 47 mm filtration area 9.6 cm2 fitting No. 8 outlet stopper for standard 1 L and 4 L filtering flasks (perforated silicone) shipped in ambient 252,00 € / 23 946 ₽Получить предложение -
Millipore Glass Base and Stopper for Vacuum Filtration XX1014732
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass Base and Stopper, 47 mm, For use with stainless steel screen support, Screen provided
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits.Application47 mm, For use with stainless steel screen support, Screen providedПараметрыmaterial borosilicate glass base, parylene coating (on stopper), silicone stopper, stainless steel screen application(s) filtration: suitable diam. 47 mm filtration area 9.6 cm2 fitting No. 8 outlet stopper for standard 1 L and 4 L filtering flasks (perforated silicone) shipped in ambient 373,50 € / 35 491 ₽Получить предложение -
Millipore Glass Base and Stopper for Vacuum Filtration XX1014722
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass Base and Stopper, 47 mm, PTFE-faced membrane support
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits.Параметрыmaterial PTFE-coated support, borosilicate glass base, parylene coating (on stopper), silicone stopper application(s) filtration: suitable diam. 47 mm filtration area 9.6 cm2 fitting No. 8 outlet stopper for standard 1 L and 4 L filtering flasks (perforated silicone) shipped in ambient 361,50 € / 34 351 ₽Получить предложение -
Millipore Glass Base and Stopper for Vacuum Filtration XX1012502
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass Base and Stopper, 25 mm, Glass frit support
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 25 mm Glass Microanalysis Filter Holder Kits.Параметрыmaterial borosilicate glass base, borosilicate glass funnel(s), fritted glass support (for filter), silicone stopper (parylene treated) application(s) filtration: suitable diam. 25 mm filtration area 2.5 cm2 fitting No. 5 outlet stopper for standard 125 mL filtering flask (perforated silicone) shipped in ambient 373,50 € / 35 491 ₽Получить предложение -
Millipore Glass Base and Stopper for Vacuum Filtration XX1014733
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass Base and Stopper, 47 mm, For use with stainless steel screen support, Screen sold separately
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits.Параметрыmaterial borosilicate glass base, parylene coating (on stopper), silicone stopper application(s) filtration: suitable diam. 47 mm filtration area 9.6 cm2 fitting No. 8 outlet stopper for standard 1 L and 4 L filtering flasks (perforated silicone) shipped in ambient 262,50 € / 24 944 ₽Получить предложение -
Millipore Glass Base and Stopper for Vacuum Filtration XX1012532
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass Base and Stopper, 25 mm, For use with stainless steel screen support, Screen provided
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 25 mm Glass Microanalysis Filter Holder Kits.Параметрыmaterial borosilicate glass , parylene coating (on stopper), silicone stopper, stainless steel screen application(s) filtration: suitable diam. 25 mm shipped in ambient 463,50 € / 44 044 ₽Получить предложение -
Millipore Glass Base and Stopper for Vacuum Filtration XX1012542
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass Base and Stopper, 25 mm, Stainless Steel Support, Screen provided.
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 25 mm Analytical Stainless Steel Filter Holder Kit.Параметрыmaterial parylene coating (on stopper), silicone stopper, stainless steel base, stainless steel screen application(s) filtration: suitable diam. 25 mm filtration area 2.8 cm2 shipped in ambient 534,00 € / 50 743 ₽Получить предложение -
Millipore Glass Cover for Vacuum Filtration XX1614701
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass cover, 47 mm, For use with Millipore MilliSolve Kit
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore MilliSolve Kit.Параметрыmaterial borosilicate glass Торговая марка MilliSolve application(s) filtration: suitable shipped in ambient 246,00 € / 23 376 ₽Получить предложение -
Millipore Glass Funnel for Vacuum Filtration XX1014704
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass funnel, 300 mL, 47 mm, Borosilicate, Ground glass seal
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits, Millipore 47 mm All-Glass Filter Holder Kits, and Millipore MilliSolve Kit.Application300 mL, 47 mm, Borosilicate, Ground glass sealПараметрыmaterial borosilicate glass application(s) filtration: suitable diam. 47 mm funnel capacity 300 mL shipped in ambient 216,00 € / 20 525 ₽Получить предложение -
Millipore Glass Funnel for Vacuum Filtration XX1014724
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass funnel, 300 mL, 47 mm, Borosilicate, PTFE-faced
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits.Параметрыmaterial PTFE-coated , borosilicate glass application(s) filtration: suitable diam. 47 mm funnel capacity 300 mL shipped in ambient 262,50 € / 24 944 ₽Получить предложение -
Millipore Glass Funnel for Vacuum Filtration XX1014707
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass funnel, 1L, 47 mm, Borosilicate, Ground glass seal
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits and Millipore 47 mm All-Glass Filter Holder Kits.Параметрыmaterial borosilicate glass application(s) filtration: suitable diam. 47 mm funnel capacity 1 L shipped in ambient 394,50 € / 37 487 ₽Получить предложение -
Millipore Glass Funnel for Vacuum Filtration XX5014704
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass funnel, 500 mL, 47 mm, Borosilicate, Ground glass seal
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 47 mm Classic Glass Filter Holder Kits and Millipore 47 mm All-Glass Filter Holder Kits.Параметрыmaterial borosilicate glass application(s) filtration: suitable diam. 47 mm funnel capacity 500 mL shipped in ambient 231,00 € / 21 951 ₽Получить предложение -
Millipore Glass Funnel for Vacuum Filtration XX1012514
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass funnel, 15 mL, 25 mm, Borosilicate, Ground glass seal
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 25 mm Glass Microanalysis Filter Holder Kits.Application15 mL, 25 mm, Borosilicate, Ground glass sealПараметрыmaterial borosilicate glass application(s) filtration: suitable diam. 25 mm funnel capacity 15 mL shipped in ambient 198,00 € / 18 815 ₽Получить предложение -
Millipore Glass Funnel for Vacuum Filtration XX1019000
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Glass funnel, 1L, 90 mm, Borosilicate, Ground glass seal
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore 90 mm All-Glass Filter Holder Kits.Параметрыmaterial borosilicate glass application(s) filtration: suitable diam. 90 mm flask capacity 1 L shipped in ambient 342,00 € / 32 498 ₽Получить предложение -
Millipore Glass Microanalysis Filter Holder - Kit XX1012500
eCl@ss: 32031613 General descriptionMillipore Glass Microanalysis Filter Holders - Kit
25 mm, Glass frit membrane support, 15mL Funnel
The Millipore Glass Microanalysis filter holder is designed for vacuum filtration of small-volume liquid samples for particulate or biological contamination analysis.
This item is a Kit composed of the following items:
(Catalog Number - Description)
XX1012514 - Millipore Glass funnel, 15 mL, 25 mm, Borosilicate, Ground glass seal
XX1012503 - Millipore Spring Clamp, 25 mm, Aluminum
XX1012502 - Millipore Glass Base and Stopper, 25 mm, Glass frit support
ALIGNED25 - Millipore Alignment Guide, 25 mm, 5/PK
Features & Benefits:
• Volume graduations clearly indicate sample volume
• Filter support available in fritted glass or stainless steel
Applications:
Contamination Analysis (not for use with thick prefilters or flammable liquids)PrincipleVacuumПараметрыmaterial anodized aluminum spring clamp(s), borosilicate glass base, borosilicate glass funnel(s), fritted glass support (for filter), parylene coating (on stopper), silicone guide(s) (for alignment), silicone stopper application(s) filtration: suitable H 15.2 cm (6 in.) diam. 2.5 cm (0.98 in.) filter diam. 25 mm filtration area 2.5 cm2 funnel capacity 15 mL fitting inlet funnel, No. 5 outlet stopper for standard 125 mL filtering flask (perforated silicone) compatibility for use with Glass Microanalysis Filter Holder shipped in ambient 442,50 € / 42 048 ₽Получить предложение -
Millipore Glass Microanalysis Filter Holder - Kit XX1012530
eCl@ss: 32031613 General descriptionMillipore Glass Microanalysis Filter Holders - Kit
25 mm, Stainless steel screen membrane support, 15mL Funnel
The Millipore Glass Microanalysis filter holder is designed for vacuum filtration of small-volume liquid samples for particulate or biological contamination analysis.
This item is a Kit composed of the following items:
(Catalog Number - Description)
XX1012514 - Millipore Glass funnel, 15 mL, 25 mm, Borosilicate, Ground glass seal
XX1012503 - Millipore Spring Clamp, 25 mm, Aluminum
XX1012532 - Millipore Glass Base and Stopper, 25 mm, For use with stainless steel screen support, Screen provided
ALIGNED25 - Millipore Alignment Guide, 25 mm, 5/PK
Features & Benefits:
• Volume graduations clearly indicate sample volume
• Filter support available in fritted glass or stainless steel
Applications:
Contamination Analysis (not for use with thick prefilters or flammable liquids)PrincipleVacuumПараметрыmaterial anodized aluminum spring clamp(s), borosilicate glass base, borosilicate glass funnel(s), parylene coating (on stopper), silicone guide(s) (for alignment), silicone stopper, stainless steel support (for screen filter; removable) application(s) filtration: suitable H 15.2 cm (6 in.) diam. 2.5 cm (0.98 in.) filter diam. 25 mm filtration area 2.5 cm2 funnel capacity 15 mL fitting inlet funnel, No. 5 outlet stopper for standard 125 mL filtering flask (perforated silicone) compatibility for use with Glass Microanalysis Filter Holder shipped in ambient 504,00 € / 47 892 ₽Получить предложение -
Millipore Ground Joint Flask for Vacuum Filtration XX1514705
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Ground Joint Flask, 1L
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore All-Glass Filter Holders Kits and Millipore MilliSolve Kit.Параметрыmaterial borosilicate glass application(s) filtration: suitable flask capacity 1 L shipped in ambient 331,50 € / 31 500 ₽Получить предложение -
Millipore Ground Joint Flask for Vacuum Filtration XX1614705
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Ground Joint Flask, 2L, Conical bottom
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore All-Glass Filter Holders Kits and Millipore MilliSolve Kit.Параметрыmaterial borosilicate glass application(s) filtration: suitable flask capacity 2 L shipped in ambient 1 054,55 € / 100 208 ₽Получить предложение -
Millipore Ground Joint Flask for Vacuum Filtration XX1614706
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Ground Joint Flask, 5L, Conical bottom
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore All-Glass Filter Holders Kits and Millipore MilliSolve Kit.Application5L, Conical bottomПараметрыmaterial borosilicate glass Торговая марка MilliSolve application(s) filtration: suitable flask capacity 5 L shipped in ambient 1 515,00 € / 143 961 ₽Получить предложение -
Millipore Ground Joint Flask for Vacuum Filtration XX1014745
eCl@ss: 32031613 General descriptionMillipore Glass Vacuum Filtration Accessory Product
Ground Joint Flask, 4L
These accessory products are designed to replace parts contained in Millipore glass vacuum filtration kits or provide for an alternative configuration.
This item is an accessory part for the Millipore All-Glass Filter Holders Kits and Millipore MilliSolve Kit.Application4LПараметрыmaterial borosilicate glass application(s) filtration: suitable flask capacity 4 L shipped in ambient 612,00 € / 58 155 ₽Получить предложение -
Millipore MilliSolve Kit XX1614700
eCl@ss: 32031613 General descriptionMillipore MilliSolve Filtration System - Kit
47 mm, Bottle-to-Bottle Filtration System
The Millipore MilliSolve Filtration System has been designed for the filtration of liquid chromatography buffers and solvents under vacuum. The system uses a 0.45 µm membrane filter to eliminate particles which can shorten column life. Vacuum filtration with the Millipore MilliSolve system also removes a large portion of dissolved gasses from buffers, reducing the risk of air bubbles interfering with LC instruments. With automatic and continuous filtration, there is no need to add liquid into a funnel as filtration progresses. Filtration occurs in a closed system, which is important when filtering hazardous fluids. If open funnel filtration is required, the 300 mL funnel replaces the vacuum cover.
This item is a kit composed of the following items:
(Catalog Number - Description)
XX1614705 - Millipore Ground Joint Flask, 2L, Conical bottom
XX1514702 - Millipore Glass Base and Cap, 47 mm, Glass frit support
XX1614701 - Millipore Glass cover, 47 mm, For use with Millipore MilliSolve Kit
XX1014703 - Millipore Spring Clamp, 47 mm, Aluminum
XT1200000 - Millipore Tubing for Solvent/Buffer, PTFE, 70 cm
XX1014704 - Millipore Glass funnel, 300 mL, 47 mm, Borosilicate, Ground glass seal
ALIGNED05 - Millipore Alignment Guide, 47 mm, 5/PK
Features & Benefits:
• Automatic, continuous solvent and buffer filtration eliminates the need to pour during filtration
• 2L receiving flask includes plug and tubing for storage, eliminating filtered buffer transfer, reducing labor and lessening contamination risk
• Conical 2L flask bottom allows access to all filtered solvent or buffer
Applications:
Mobile Phase Preparation, Buffer FiltrationPrincipleVacuumПараметрыmaterial PTFE tubing, anodized aluminum clamp(s), borosilicate flask (with ground joint), borosilicate glass base, borosilicate glass cap, borosilicate glass cover, borosilicate glass funnel(s), silicone sleeve (for alignment), stainless steel forceps Quality Level 100, Торговая марка MilliSolve application(s) filtration: suitable diam. 12.5 cm flask capacity 2 L shipped in ambient 1 488,00 € / 141 396 ₽Получить предложение -
Millipore Vacuum Filtering Side-Arm Flask XX1014705
eCl@ss: 32031613 General descriptionMillipore Vacuum Filtering Side-Arm Flask
1L, Threaded side-arm
These side-arm flasks are designed for use in vacuum filtration procedures with classic Millipore Glass Filter Holders.
This item is an accessory item for multiple kits.
Features & Benefits:
• Side arm connects to vacuum source with 3/8 in. I.D. hose
• 1 L and 4 L flasks accept No. 8 perforated stopper
• 125 mL flask accepts No. 5 stopper
Applications:
Vacuum Filtration Using Classic Filter HoldersПараметрыmaterial borosilicate glass application(s) filtration: suitable flask capacity 1 L fitting No. 8 outlet stopper for standard 1 L filtering flask (perforated silicone) shipped in ambient 151,50 € / 14 396 ₽Получить предложение -
Millipore Vacuum Filtering Side-Arm Flask XX1014744
eCl@ss: 32031613 General descriptionMillipore Vacuum Filtering Side-Arm Flask
4L, Threaded side-arm
These side-arm flasks are designed for use in vacuum filtration procedures with classic Millipore Glass Filter Holders.
This item is an accessory item for multiple kits.
Features & Benefits:
• Side arm connects to vacuum source with 3/8 in. I.D. hose
• 1 L and 4 L flasks accept No. 8 perforated stopper
• 125 mL flask accepts No. 5 stopper
Applications:
Vacuum Filtration Using Classic Filter HoldersApplication4L, Threaded side-armПараметрыmaterial borosilicate glass application(s) filtration: suitable flask capacity 4 L fitting No. 8 outlet stopper for standard 1 L and 4 L filtering flasks (perforated silicone) shipped in ambient 454,50 € / 43 188 ₽Получить предложение -
Millipore Vacuum Filtering Side-Arm Flask XX1012505
eCl@ss: 32031613 General descriptionMillipore Vacuum Filtering Side-Arm Flask
125 mL, Threaded side-arm
These side-arm flasks are designed for use in vacuum filtration procedures with classic Millipore Glass Filter Holders.
This item is an accessory item for the Glass Microanalysis Filter Holder Kit.
Features & Benefits:
• Side arm connects to vacuum source with 3/8 in. I.D. hose
• 1 L and 4 L flasks accept No. 8 perforated stopper
• 125 mL flask accepts No. 5 stopper
Applications:
Vacuum Filtration Using Classic Filter HoldersПараметрыmaterial borosilicate glass application(s) filtration: suitable H 4.3 cm (1.7 in.) diam. 2.7 in. flask capacity 125 mL fitting No. 5 outlet stopper for standard 125 mL filtering flask (perforated silicone) shipped in ambient 111,00 € / 10 548 ₽Получить предложение -
Millipore Vacuum Filtering Side-Arm Flask XX1514706
eCl@ss: 32031613 General descriptionMillipore Vacuum Filtering Side-Arm Flask
1L, New Threaded side-arm with quick vacuum disconnect
These side-arm flasks are designed for use in vacuum filtration procedures with classic Millipore Glass Filter Holders.
This item is an accessory item for multiple kits.
Features & Benefits:
• Side arm connects to vacuum source with 3/8 in. I.D. hose
• 1 L and 4 L flasks accept No. 8 perforated stopper
• 125 mL flask accepts No. 5 stopper
Applications:
Vacuum Filtration Using Classic Filter HoldersПараметрыmaterial borosilicate glass application(s) filtration: suitable flask capacity 1 L fitting No. 8 outlet stopper for standard 1 L filtering flask (perforated silicone) shipped in ambient 142,50 € / 13 541 ₽Получить предложение -
Millipore Vacuum Filtering Side-Arm Flask XX1012506
eCl@ss: 32031613 General descriptionMillipore Vacuum Filtering Side-Arm Flask
125 mL, New Threaded side-arm with quick vacuum disconnect
These side-arm flasks are designed for use in vacuum filtration procedures with classic Millipore Glass Filter Holders.
This item is an accessory item for the Glass Microanalysis Filter Holder Kit.
Features & Benefits:
• Side arm connects to vacuum source with 3/8 in. I.D. hose
• 1 L and 4 L flasks accept No. 8 perforated stopper
• 125 mL flask accepts No. 5 stopper
Applications:
Vacuum Filtration Using Classic Filter HoldersПараметрыmaterial borosilicate glass application(s) filtration: suitable H 4.3 cm (1.7 in.) diam. 2.7 in. flask capacity 125 mL fitting No. 5 outlet stopper for standard 125 mL filtering flask (perforated silicone) shipped in ambient 144,00 € / 13 683 ₽Получить предложение
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
