Printed Electronic Materials
- Сортировать:
- Вид таблицей
-
Longchain Nylon 3D Printing Filament TRD3D0056-1EA
NACRES: NA.23 General descriptionLongchain Nylon 3D Printing Filament:- Longchain is a technopolymer ideal for metal replacement.
- Characteristics are great for industrial and technical applications
- It can withstand oils, electricity, high and low temperatures and pressure
- Very low hygroscopy, no need to worry about humidity
Material Properties- Density: 1 g/cm3
- Hardness: 75 sh/D
- Tensile modulus: 1440 MPa
- Melting point: 180 °C
- Charpy Impact at 23°C: No break
- Charpy Impact at -30°C: No break
- Yield stress: 43 MPa
ApplicationLongchain PA 3D Printing Parameters- Extruder (nozzle) temperature: 240 +/-10 °C
- Bed temperature: 95 +/-10 °C
- Print speed: 40-50 mm/s
- Fan: 0-30 %
- Minimum nozzle diameter: 0.35 mm
- Plate materials: kapton tape with glue, etc.
Параметрыdiam. 1.75 mm weight 500 geach
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Molybdenum disulfide ink for inkjet printing 901187-5ML
General descriptionCuring condition: 400° C, 3 hours in Ar/H2 environment.Other Noteswaveform file (downloadable .csv file),
waveform file(downloadable.csv file),
cartridge settings file (downloadable.jst file),
cartridge settings (downloadable docx file),Legal InformationSold under Materials Transfer Agreement with Mark Hersam group at Northwestern University.Параметрыdescription Resistivity: 10-100 kcm (thermally annealed 400 °C for 3 hours in Ar/H2 environment, film thickness >150 nm) Quality Level 100, form dispersion composition Solid content, 3.0-3.85% color green particle size 0.4 µm surface tension 30-35 dyn/cm viscosity 4-11 mPa.s(25 °C) (shear viscoisty at 1000 s-1, 25 °C) bp 213-218 °C (Terpineol) density 0.9-1.1 g/mL at 25 °C SMILES string [Mo]=S=S
Safety Informationpictograms GHS02,GHS05,GHS07 signalword Danger hcodes H226 - H302 + H312 + H332 - H315 - H318 pcodes P210 - P280 - P301 + P312 - P303 + P361 + P353 - P304 + P340 + P312 - P305 + P351 + P338 RIDADR UN 1915 3 / PGIII WGK Germany WGK 2 Flash Point F 114.8 °F - closed cup Flash Point C 46 °C - closed cup Узнать цену -
Molybdenum disulfide ink for spin/spray coating 901867-10ML
Linear Formula: MoS2 NACRES: NA.23 Applicationn-type semiconductor for use in transistors, photodetectors and photovoltaicsLegal InformationSold under Materials Transfer Agreement with Mark Hersam group at Northwestern UniversityПараметрыdescription Resistivity: 75-100 k·cm (Prepared by spin-coating at 1000 rpm/30 s for 1 coat, followed by thermal annealing at 400°C in Ar/H2 for 3 hours) form dispersion composition Solid Content, 1.5-2.5% color green particle size 0.4 µm viscosity 2-4 mPa.s bp 78 °C (Ethanol) density 0.78-0.88 g/mL at 25 °C SMILES string [Mo]=S=S
Safety Informationpictograms GHS02,GHS05 signalword Danger hcodes H225 - H318 pcodes P210 - P233 - P280 - P303 + P361 + P353 - P305 + P351 + P338 + P310 - P370 + P378 RIDADR UN1170 - class 3 - PG 2 - Ethanol, solution WGK Germany WGK 3 Flash Point F 55.4 °F - closed cup Flash Point C 13.0 °C - closed cup Узнать цену -
Molybdenum oxide nanoparticle ink 900151-10ML
ApplicationMoO3 nanoparticle ink is for slot-dye, spin coating or doctor blading for use in organic electronics as a hole injection layer or hole transport layer.Packaging10 mL in poly bottleCaution- Store in a dark at room temperature.
- Prior to application: shake then ultrasonicate with sonic horn and (optionally) filter through 0.45 µm PTFE filter.
- Post-treatment: use plasma cleaning of dry films for removal of organic dispersant.
Legal InformationProduct of Avantama Ltd.Параметрыdescription Solid content: 2.3 - 2.7wt% crystalline MoO3 in ethanol Quality Level 100, form dispersion particle size 10-40 nm viscosity 1-3 cP
Safety Informationpictograms GHS02,GHS07,GHS08 signalword Danger hcodes H225 - H319 - H351 pcodes P202 - P210 - P233 - P240 - P305 + P351 + P338 - P308 + P313 RIDADR UN1170 - class 3 - PG 2 - Ethanol, solution WGK Germany WGK 2 Flash Point F 57.2 °F Flash Point C 14 °C Узнать цену -
Molybdenum trioxide/PEDOT:PSS ink
Кат. номер 901047-50ML 901047-10ML ApplicationThis ink is for charge selective layers in printed electronics. This ink is for spin-coating, doctor blading, or slot-die.Caution- Storage: In dark at room temperature.
- Prior to application: Shake well.
- Drying of deposited films at >100 °C.
Legal InformationProduct of Avantama Ltd.Параметрыdescription Solid content: 0.8 wt% crystalline MoO3/PEDOT:PSS Quality Level 100, form dispersion color dark blue particle size 10-30 nm viscosity 3 cP
Safety Informationpictograms GHS02,GHS05,GHS07,GHS08 signalword Danger hcodes H225 - H318 - H336 - H351 pcodes P201 - P210 - P280 - P305 + P351 + P338 + P310 - P308 + P313 Target Organs Central nervous system RIDADR UN 1987BE 3 / PGII WGK Germany WGK 3 Flash Point F 63.5 °F - closed cup Flash Point C 17.5 °C - closed cup Узнать цену -
P51 Polycarbonate 3D Printing Filament TRD3D0062-1EA
NACRES: NA.23 General descriptionP51 Polycarbonate 3D Printing Filament:- Stong, Tough, and Transparent
- P51 gives high impact resistance to your prints
- Good thermal resistance, P51 can withstand high temperatures with ease
- One of the clearest polymers available
- P51 is one of the most versatile polymers in industry, with many fields of application
Material Properties- Density: 1.2 g/cm3
- Water absorption: 0.15%
- Tensile modulus: 2340 MPa
- Tensile stress at break: 71 MPa
- Charpy impact at 23°C: No break
- Charpy impact at -30°C: No break
- Hardness: 72 shore M
- Melting point: 220 °C
- Vicat softening temperature: 96 °C
ApplicationP51 Polycarbonate 3D Printing Parameters:- Extruder (nozzle) temperature: 245 +/- 10 °C
- Bed temperature: 100 +/- 10 °C
- Print speed: 50-60 mm/s
- Fan: 0-20 %
- Minimum nozzle diameter: 0.35 mm
- Plate materials: blue tape, kapton tape, etc.
Параметрыdiam. 1.75 mm weight 500 geach
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Performance ABS 3D Printing Filament TRD3D0027-1EA
NACRES: NA.23 General descriptionPerformance ABS 3D printing filaments- Acrylonitrile Butadiene Styrene (ABS) is a polymer known for its toughness, brilliance and tactile feeling
- It is used in many areas, such as appliance shells and gears, cosmetics containers and industrials with power plugs, driving bar coverings and much more
- Our special formulation reduces offensive odors, making our ABS filaments very efficient
Material Properties- Density: 1.04 g/cm3
- Tensile modulus: 2300 Mpa
- Tensile strengh at yield: 2.6%
- Flexural strength: 65%
- IZOD impact strength notched 23 °C: 29 kJ/m2
- Water absorption: 1%
- MFR: 19g/10 min
- Vicat softening temperature: 90 °C
ApplicationPerformance ABS 3D Printing Parameter:- Extruder (nozzle) temperature: 230 +/-10 °C
- Bed temperature: 100 +/-10 °C
- Print speed: 60-90 mm/s
- Fan: 0-30 %
- Minimum nozzle diameter: 0.3 mm
- Plate materials: kapton tape, abs glue, etc.
Application Notes:- To enhance the brightness and smooth the finish, objects printed can be processed with acetone gas (Always be careful to take proper safety measures)
- Warping of the final object can be reduced using a heated bed
- Sun exposure weakens the ABS, not recommended for use in outdoor applications
Параметрыdiam. 1.75 mm weight 1 kgeach
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Performance ABS 3D Printing Filament TRD3D0028-1EA
NACRES: NA.23 General descriptionPerformance ABS 3D printing filaments- Acrylonitrile Butadiene Styrene (ABS) is a polymer known for its toughness, brilliance and tactile feeling
- It is used in many areas, such as appliance shells and gears, cosmetics containers and industrials with power plugs, driving bar coverings and much more
- Our special formulation reduces offensive odors, making our ABS filaments very efficient
Material Properties- Density: 1.04 g/cm3
- Tensile modulus: 2300 Mpa
- Tensile strengh at yield: 2.6%
- Flexural strength: 65%
- IZOD impact strength notched 23 °C: 29 kJ/m2
- Water absorption: 1%
- MFR: 19g/10 min
- Vicat softening temperature: 90 °C
ApplicationPerformance ABS 3D Printing Parameter:- Extruder (nozzle) temperature: 230 +/-10 °C
- Bed temperature: 100 +/-10 °C
- Print speed: 60-90 mm/s
- Fan: 0-30 %
- Minimum nozzle diameter: 0.3 mm
- Plate materials: kapton tape, abs glue, etc.
Application Notes:- To enhance the brightness and smooth the finish, objects printed can be processed with acetone gas (Always be careful to take proper safety measures)
- Warping of the final object can be reduced using a heated bed
- Sun exposure weakens the ABS, not recommended for use in outdoor applications
Параметрыdiam. 1.75 mm weight 1 kgeach
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Performance ABS 3D Printing Filament TRD3D0029-1EA
NACRES: NA.23 General descriptionPerformance ABS 3D printing filaments- Acrylonitrile Butadiene Styrene (ABS) is a polymer known for its toughness, brilliance and tactile feeling
- It is used in many areas, such as appliance shells and gears, cosmetics containers and industrials with power plugs, driving bar coverings and much more
- Our special formulation reduces offensive odors, making our ABS filaments very efficient
Material Properties- Density: 1.04 g/cm3
- Tensile modulus: 2300 Mpa
- Tensile strengh at yield: 2.6%
- Flexural strength: 65%
- IZOD impact strength notched 23 °C: 29 kJ/m2
- Water absorption: 1%
- MFR: 19g/10 min
- Vicat softening temperature: 90 °C
ApplicationPerformance ABS 3D Printing Parameter:- Extruder (nozzle) temperature: 230 +/-10 °C
- Bed temperature: 100 +/-10 °C
- Print speed: 60-90 mm/s
- Fan: 0-30 %
- Minimum nozzle diameter: 0.3 mm
- Plate materials: kapton tape, abs glue, etc.
Application Notes:- To enhance the brightness and smooth the finish, objects printed can be processed with acetone gas (Always be careful to take proper safety measures)
- Warping of the final object can be reduced using a heated bed
- Sun exposure weakens the ABS, not recommended for use in outdoor applications
Параметрыdiam. 1.75 mm weight 1 kgeach
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Performance ABS 3D Printing Filament TRD3D0030-1EA
NACRES: NA.23 General descriptionPerformance ABS 3D printing filaments- Acrylonitrile Butadiene Styrene (ABS) is a polymer known for its toughness, brilliance and tactile feeling
- It is used in many areas, such as appliance shells and gears, cosmetics containers and industrials with power plugs, driving bar coverings and much more
- Our special formulation reduces offensive odors, making our ABS filaments very efficient
Material Properties- Density: 1.04 g/cm3
- Tensile modulus: 2300 Mpa
- Tensile strengh at yield: 2.6%
- Flexural strength: 65%
- IZOD impact strength notched 23 °C: 29 kJ/m2
- Water absorption: 1%
- MFR: 19g/10 min
- Vicat softening temperature: 90 °C
ApplicationPerformance ABS 3D Printing Parameter:- Extruder (nozzle) temperature: 230 +/-10 °C
- Bed temperature: 100 +/-10 °C
- Print speed: 60-90 mm/s
- Fan: 0-30 %
- Minimum nozzle diameter: 0.3 mm
- Plate materials: kapton tape, abs glue, etc.
Application Notes:- To enhance the brightness and smooth the finish, objects printed can be processed with acetone gas (Always be careful to take proper safety measures)
- Warping of the final object can be reduced using a heated bed
- Sun exposure weakens the ABS, not recommended for use in outdoor applications
Параметрыdiam. 1.75 mm weight 1 kgeach
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Performance ABS 3D Printing Filament TRD3D0031-1EA
NACRES: NA.23 General descriptionPerformance ABS 3D printing filaments- Acrylonitrile Butadiene Styrene (ABS) is a polymer known for its toughness, brilliance and tactile feeling
- It is used in many areas, such as appliance shells and gears, cosmetics containers and industrials with power plugs, driving bar coverings and much more
- Our special formulation reduces offensive odors, making our ABS filaments very efficient
Material Properties- Density: 1.04 g/cm3
- Tensile modulus: 2300 Mpa
- Tensile strengh at yield: 2.6%
- Flexural strength: 65%
- IZOD impact strength notched 23 °C: 29 kJ/m2
- Water absorption: 1%
- MFR: 19g/10 min
- Vicat softening temperature: 90 °C
ApplicationPerformance ABS 3D Printing Parameter:- Extruder (nozzle) temperature: 230 +/-10 °C
- Bed temperature: 100 +/-10 °C
- Print speed: 60-90 mm/s
- Fan: 0-30 %
- Minimum nozzle diameter: 0.3 mm
- Plate materials: kapton tape, abs glue, etc.
Application Notes:- To enhance the brightness and smooth the finish, objects printed can be processed with acetone gas (Always be careful to take proper safety measures)
- Warping of the final object can be reduced using a heated bed
- Sun exposure weakens the ABS, not recommended for use in outdoor applications
Параметрыdiam. 1.75 mm weight 1 kgeach
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PLA 3D printing filament 3DXPLA012-1EA
CAS Number: 9051-89-2 General description3DXTech™ is made in the USA using 100% virgin resin and colorants - precision extruded onto 1kg reels (2.2 lbs.). The filament is then vacuum-sealed with desiccant to protect it from moisture.Preparation NoteRecommended Print Conditions: Extruder Temp: 190-220°C. Bed Temp: 23-60°C [No heat bed required]Legal InformationProduct of 3DXTech™
3DXTech is a trademark of 3DXTechПараметрыdiam. 2.85 mm color red
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
PLA 3D printing filament 3DXPLA013-1EA
CAS Number: 9051-89-2 General description3DXTech™ is made in the USA using 100% virgin resin and colorants - precision extruded onto 1kg reels (2.2 lbs.). The filament is then vacuum-sealed with desiccant to protect it from moisture.Preparation NoteRecommended Print Conditions: Extruder Temp: 190-220°C. Bed Temp: 23-60°C [No heat bed required]Legal InformationProduct of 3DXTech™
3DXTech is a trademark of 3DXTechПараметрыdiam. 1.75 mm color white
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
PLA 3D printing filament 3DXPLA006-1EA
CAS Number: 9051-89-2 General description3DXTech™ is made in the USA using 100% virgin resin and colorants - precision extruded onto 1kg reels (2.2 lbs.). The filament is then vacuum-sealed with desiccant to protect it from moisture.Preparation NoteRecommended Print Conditions: Extruder Temp: 190-220°C. Bed Temp: 23-60°C [No heat bed required]Legal InformationProduct of 3DXTech™
3DXTech is a trademark of 3DXTechПараметрыdiam. 2.85 mm color green
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
PLA 3D printing filament 3DXPLA009-1EA
CAS Number: 9051-89-2 General description3DXTech™ is made in the USA using 100% virgin resin and colorants - precision extruded onto 1kg reels (2.2 lbs.). The filament is then vacuum-sealed with desiccant to protect it from moisture.Preparation NoteRecommended Print Conditions: Extruder Temp: 190-220°C. Bed Temp: 23-60°C [No heat bed required]Legal InformationProduct of 3DXTech™
3DXTech is a trademark of 3DXTechПараметрыdiam. 1.75 mm color orange
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
PLA 3D printing filament 3DXPLA011-1EA
CAS Number: 9051-89-2 General description3DXTech™ is made in the USA using 100% virgin resin and colorants - precision extruded onto 1kg reels (2.2 lbs.). The filament is then vacuum-sealed with desiccant to protect it from moisture.Preparation NoteRecommended Print Conditions: Extruder Temp: 190-220°C. Bed Temp: 23-60°C [No heat bed required]Legal InformationProduct of 3DXTech™
3DXTech is a trademark of 3DXTechПараметрыdiam. 1.75 mm color red
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
PLA 3D printing filament 3DXPLA015-1EA
CAS Number: 9051-89-2 General description3DXTech™ is made in the USA using 100% virgin resin and colorants - precision extruded onto 1kg reels (2.2 lbs.). The filament is then vacuum-sealed with desiccant to protect it from moisture.Preparation NoteRecommended Print Conditions: Extruder Temp: 190-220°C. Bed Temp: 23-60°C [No heat bed required]Legal InformationProduct of 3DXTech™
3DXTech is a trademark of 3DXTechПараметрыdiam. 1.75 mm color yellow
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
PLA 3D printing filament 3DXPLA016-1EA
CAS Number: 9051-89-2 General description3DXTech™ is made in the USA using 100% virgin resin and colorants - precision extruded onto 1kg reels (2.2 lbs.). The filament is then vacuum-sealed with desiccant to protect it from moisture.Preparation NoteRecommended Print Conditions: Extruder Temp: 190-220°C. Bed Temp: 23-60°C [No heat bed required]Legal InformationProduct of 3DXTech™
3DXTech is a trademark of 3DXTechПараметрыdiam. 2.85 mm color yellow
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Polymer dielectric grey for screen printing 902497-250G
NACRES: NA.23 General descriptionThis product is grey colored screen printable polymer dielectric, suitable for defining electrode areas and forms a protective layer over the electrode tracking during immersion of the electrode.ApplicationPolymer dielectric grey for screen printing can be used for a variety of applications such as ink in the design of MRI receiving coils, organic light emitting diodes (OLEDs) and organic thin film transistors (OTFTs).Features and BenefitsThe formulation is designed for maximum flexibility.Preparation NoteScreen Printing Equipment: semi-automatic, automatic.
Ink Screen Life: >3 hours
Screen Types: stainless steel, polyester mesh 156-325 tpi- Typical Drying Conditions: Dry at 80 °C for 30 minutes, or 130 °C for 10-15 minutes in a box oven
- Suitable for Jet drying, infra-red and drying in high speed
- reel-to-reel
Substrate: polyester, PVC, polycarbonate, ceramic or aluminaLegal InformationProduct of Gwent Electronic Materials Ltd (GEM), part of Sun Chemical CorporationПараметрыdescription Coverage: 305 cm2 per g (using a 230 mesh stainless steel screen with 13 micron emulsion), Solvent Resistance: THF Attack, Solvent Resistance: Acetone Attack, Solvent Resistance: DMAC Attack, Solvent Resistance: DMF Attack, Solvent Resistance: MEK Full attack composition Solid content, 50-55% (at 150 °C) viscosity 12.0-16.0 Pa.s (Haake RS1 C20/2° TiL at 230 sec-1 at 25 °C)
Safety Informationpictograms GHS07,GHS08 signalword Warning hcodes H319 - H351 pcodes P201 - P202 - P264 - P280 - P305 + P351 + P338 - P308 + P313 RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F 191.3 °F Flash Point C 88.5 °C Узнать цену -
Silver
Empirical Formula (Hill Notation): Ag Linear Formula: Ag CAS Number: 7440-22-4 Molecular Weight: 107.87 MDL number: MFCD00003397 PubChem Substance ID: 329765060 NACRES: NA.23
Кат. номер 735825-25G 735825-25G-PW ApplicationSilver conductive paste (Ag) can be used as an adhesive which can be used on indium tin oxide (ITO) for a variety of electronic applications. It can also be used as an interdigitated electrode (IDE) for gas sensors.Packaging25 g in glass bottleLegal InformationProduct of ANP, Inc.ПараметрыQuality Level 200 form paste (microparticles) concentration 75% curing temperature 120-150 °C/30-60 min resistivity 1-3 * 10^-5 -cm (conductive paste), 1.59 µ-cm, 20°C matrix -Terpineol (Dispersion
Recommended washing solvent = polar solvent (Ethanol, IPA, Methanol, etc)
Recommended substrates = ITO film & glass, plastic film)particle size 200 nm (80%), <5 nm (20%) viscosity 100,000-300,000 cP, 0.4 rpm, Brookfield bp 2212 °C (lit.) mp 960 °C (lit.) density 10.49 g/cm3 (lit.) storage temp. 2-8°C SMILES string [Ag] InChI 1S/Ag InChI key BQCADISMDOOEFD-UHFFFAOYSA-N
Safety Informationpictograms GHS07,GHS09 signalword Warning hcodes H315 - H319 - H410 pcodes P273 - P302 + P352 - P305 + P351 + P338 RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F 205.0 °F Flash Point C 96.1 °C Узнать цену -
Silver ink 907669-5G
Linear Formula: Ag ApplicationThis Ag ink product is a conductive high viscous ink based on single-crystal silver nanoparticles in an organic solvent, has been designed for LIFT (Laser Induced Forward Transfer) digital printing and laser sintering.
The ink offers:- Uniform and reproducible donor layer with low drying speed
- Stable accurate jetting in different types of laser systems, wide working window of jetting parameters
- High speed printing (20-50kHz), allowing high throughput
- Narrow patterning on plastic and glass substrates (line width 50 µm, height 0.5 µm, spacing 50 µm)
- Laser sintering of LIFT printed pattern, providing good electrical properties
Fit for:
LIFT digital printing
Additive electronic manufacturing
Printed electronics: RFID, FPD, Sensors
Laser induced forward transfer printing (LIFT) is a non-contact, nozzle-free, one step, direct laser writing process.
LIFT can operate under atmospheric conditions, is compatible with low laser fluences, allows the printing of organic and inorganic materials as well as biological elements. The printing process can take place from both liquid and solid phases. It further has a high lateral resolution only defined by the laser spot size. It is a method compatible with inorganic semiconductor sensor fabrication, OLED fabrication and bio printing.Other NotesResistivity (4PP): After laser sintering* 8 µ·cm ( 5 bulk) for LIFT printed line (1-2 µm thick) on plastic substrate
*Parameters should be optimized depending on line geometry and substrateStorage and StabilityKeep container tightly closed. Store at room temperature, do not heat above 60 °C and do not freeze.Legal InformationLumisizer is a trademark of LUM GmbHПараметрыdescription Silver content : 75 wt%, Solvent : Diethylene Glycol Mono Butyl Ether (DGBE), Surface Tension : 28 dyn/cm (Pendant Drop) particle size 50-70 nm (by Lumisizer™), 90-120 nm (by Lumisizer™) viscosity 50,000-100,000 cP (Shear Rate: 1 s-1
250cP - 450 cP (Shear Rate: 1000 s-1))density 2.85-3.3 storage temp. 15-25°C
Safety Informationpictograms GHS07,GHS09 signalword Warning hcodes H319 - H410 pcodes P264 - P273 - P280 - P305 + P351 + P338 - P337 + P313 - P391 WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Silver nanoparticle ink
Empirical Formula (Hill Notation): Ag Linear Formula: Ag Molecular Weight: 107.87 MDL number: MFCD00003397 PubChem Substance ID: 329768667
Кат. номер 798738-25G 798738-10G General descriptionSilver is a good conductor and resistant to oxidation. It is used in printed conductors and printable inks (based on silver nanoparticles). Nanosilver is used as an antibacterial material in filters for air and water purification, in textiles, and for wound treatment. Other large scale applications of nanosilver include metallization of solar cells, thin film electronics, sensors, and catalysts.ApplicationThe ink is suitable for digital printing such as Inkjet and Aerosol systems, Photovoltaic Cells Printed Electronics, FPD, RFID, PCB Decoration, Antibacterial AgentPackaging10, 25 g in glass bottleПараметрыdescription specific gravity 1.53 +/- 0.05 g/ml Quality Level 100 concentration 30 wt % dispersion in ethylene glycol resistivity 20 µ-cm (after sintering at 200 °C, 2h), 45 µ-cm (after sintering at 120 °C, 2h), 7 µ-cm (after sintering at 240 °C, 4h) particle size 115 nm (d90 (by Brookhaven)), 70 nm (d50 (by Brookhaven)) avg. part. size 180 nm surface tension 45 dyn/cm viscosity 28 cP(25 °C, Brookfield) (Con Spindle 42) SMILES string [Ag] InChI 1S/Ag InChI key BQCADISMDOOEFD-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H302 RIDADR UN 3082 9 / PGIII WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Silver Nanoparticle Pneumatic Aerosol Jet® Ink 900191-10G
NACRES: NA.23 Packaging10 g in glass bottleOther NotesCaution, do not freeze.Legal InformationAerosol is a registered trademark of Cytec Technology Corp.
Xerox is a registered trademark of Xerox CorporationПараметрыQuality Level 100, description Conductivity: 1 x 105 Scm-1 form dispersion surface tension 28-30 mN/m, at 25°C viscosity 10-13 cP (shear viscosity at 25°C, 1-400 s-1) cation traces Ag: 63-67 wt. % (by ash) storage temp. 2-8°C
Safety Informationpictograms GHS02,GHS07,GHS09 signalword Warning hcodes H226 - H315 - H319 - H410 pcodes P210 - P305 + P351 + P338 - P370 + P378 RIDADR UN1993 - class 3 - PG 3 - EHS - Flammable liquids, n.o.s., HI: all WGK Germany WGK 3 Flash Point F 93.9 °F Flash Point C 34.4 °C Узнать цену -
Silver nanoparticles ink for inkjet printing 901083-25ML
Linear Formula: Ag NACRES: NA.23 General descriptionSmartInk S-CS01130 conductive ink was developed for the printed electronics, is particularly well suited for applications requiring high conductivity and high resolution. This ink, based on silver, is perfectly adapted to design conductive traces on flexible substrates. Also, it is shaped for IoT application which required antennas (HF, UHF).
SmartInk S-CS01130 conductive ink shows improved jetting performance and is successfully used on different tools such as Drop on Demand (DOD) inkjet printer FUJIFILM Dimatix, or such as digital micro-dispensing inkjet printer Microdrop and Microfab.Features and BenefitsProduct benefits:- Very high electrical conductivity.
- Low curing temperature for printing on flexible substrates.
- Non CMR ink.
- Compatible with various curing process including photonic, IR, low vacuum oven and thermal.
- Unchanged conductivity on bending.
- Good adhesion on various flexible substrates (PET, Kapton,).
Preparation NoteTypical processing guideline- SmartInk S-CS01130 conductive ink is warmed to room temperature (about 10 minutes) and left for 5 minutes in an ultrasonic bath in order to get rid of any aggregates.
- Filtration on a 0.45 µm PTFE filter syringe to avoid any nozzles clogging.
Legal InformationProduct of Genes′Ink.ПараметрыQuality Level 100 description Resistivity: 1.5 mΩ/sq, per 25 μm (by digital printing using DIMATIX DMP 2800-Cartridge 10 pL, oven curing at 150 °C for 30 min.) form liquid (dark brown/blue) surface tension 29 mN/m±3 mN/m viscosity 13 mPa.s±3 mPa.s(20 °C) capacity 20±1 % loading (Nanoparticles loading) storage temp. 2-8°C
Safety Informationpictograms GHS02,GHS05,GHS07,GHS08,GHS09 signalword Danger hcodes H226 - H304 - H315 - H317 - H318 - H410 pcodes P210 - P273 - P280 - P301 + P310 + P331 - P302 + P352 - P305 + P351 + P338 + P310 RIDADR UN1993 - class 3 - PG 3 - EHS - Flammable liquids, n.o.s., HI: all WGK Germany WGK 3 Flash Point F 104.0 °F Flash Point C 40 °C Узнать цену -
Silver nanoparticles ink for screen printing 901090-25G
Linear Formula: Ag General descriptionProduct benefits:- Very high electrical conductivity.
- Very low curing temperature for printing on flexible substrates.
- Non CMR ink.
- Unchanged conductivity on bending.
- Compatible with various curing processes including photonic, IR, low vacuum oven and thermal.
- Good adhesion on various flexible substrates (PET, Kapton,® …).
SmartInk S-CS21303 conductive ink developed for printed electronics market is particularly well suited for applications requiring high conductivity and high resolution at very low curing temperatures. This ink, based on silver, is perfectly adapted to design conductive tracks on flexible substrates and is suitable to produce antennas for IoT applications (HF, UHF).
This ink has been developed to address the applications which require very low curing temperatures.Other NotesResistivity: 1 m/sq, per 25 µm (screen printed on PET, curing at 200 °C/5 min)
3 m/sq, per 25 µm (screen printed on PET, curing at 120 °C/5 min)
4 m/sq, per 25 µm (screen printed on PET, curing at 80 °C/5 min)
5 m/sq, per 25 µm (screen printed on PET, curing at 60 °C/5 min)Preparation NoteTypical processing guideline:- SmartInk S-CS21303 conductive ink needs to be agitated before use.
- Ready to use. No need to use thinner.
Legal InformationProduct of Genes′Ink
Kapton is a registered trademark of E. I. du Pont de Nemours and CompanyПараметрыQuality Level 100 form viscous liquid (paste) viscosity 4,600-6,400 mPa.s(20 °C) (at 100 s-1), 6,600-10,000 mPa.s(20 °C) (at 40 s-1) capacity 55±5 % loading (Nanoparticles loading) storage temp. 2-8°C
Safety Informationpictograms GHS07,GHS09 signalword Warning hcodes H315 - H319 - H410 pcodes P273 - P302 + P352 - P305 + P351 + P338 RIDADR UN 3082 9 / PGIII WGK Germany WGK 3 Flash Point F 199.4 °F Flash Point C 93 °C Узнать цену -
Silver nanoparticles ink for spray printing 901089-25ML
Linear Formula: Ag General descriptionSmartInk S-CS11101 conductive Ink developed for the printed electronics is particularly well suited for applications requiring high conductivity and high resolution. This ink, based on silver, is perfectly adapted to design conductive traces on flexible substrates. Also, it is shaped for IoT application which required antennas (HF, UHF).
SmartInk S-CS11101 conductive ink shows great performance on spray printer.Features and BenefitsProduct benefits:- Very high electrical conductivity.
- Low curing temperature for printing on flexible substrates.
- Non CMR ink.
- Unchanged conductivity on bending.
- Good adhesion on various flexible substrates (PET, Kapton,® …).
Preparation NoteTypical processing guideline:- SmartInk S-CS01130 Conductive Ink is warmed to room temperature (about 10 minutes) and left for 5 minutes in an ultrasonic bath in order to get rid of any aggregates.
- Filtration on a 0.45 µm PTFE filter syringe.
Legal InformationProduct of Genes′Ink
Kapton is a registered trademark of E. I. du Pont de Nemours and CompanyПараметрыdescription Resistivity: 2 mΩ/sq, per 25 μm (coated on PET arcophane AO STS 100 μm using normandy coating, thermal curing at 150 °C for 30 min) Quality Level 100, form liquid (dark brown/blue) surface tension 27 mN/m±4 mN/m viscosity <5 mPa.s(20 °C) capacity 20±1 % loading (Nanoparticles loading) storage temp. 2-8°C
Safety Informationpictograms GHS02,GHS08,GHS09 signalword Danger hcodes H226 - H304 - H410 pcodes P210 - P233 - P240 - P273 - P301 + P310 - P331 RIDADR UN3295 - class 3 - PG 3 - EHS - Hydrocarbons, liquid, n.o.s., HI: A, S (not BR) WGK Germany WGK 3 Flash Point F 86.0 °F Flash Point C 30 °C Узнать цену -
Silver, dispersion
Empirical Formula (Hill Notation): Ag Linear Formula: Ag Molecular Weight: 107.87 MDL number: MFCD00003397 PubChem Substance ID: 329765113 NACRES: NA.23
Кат. номер 736465-25G 736465-100G General descriptionSilver is a good conductor and is resistant to oxidation. It is used in printed conductors and printable inks (based on silver nanoparticles).Other large scale applications of nanosilver include metallization of solar cells, thin film electronics, sensors, and catalysts.
Curing Temperature: 100-150 °C
Recommended substrates: Plastic films
Recommended washing solvent: Polar Solvents: Ethyl Alcohol, IPA etc.Packaging25, 100 g in glass bottleLegal InformationProduct of ANP, Inc.ПараметрыQuality Level 200 form dispersion, nanoparticle concentration 30-35 wt. % in triethylene glycol monomethyl ether spec. resistivity 11 µ-cm surface tension 35-40 dyn/cm refractive index n20/D 1.333 particle size 50 nm viscosity 10-18 cP density 1.45 g/mL±0.05 g/mL at 25 °C storage temp. 2-8°C SMILES string [Ag] InChI 1S/Ag InChI key BQCADISMDOOEFD-UHFFFAOYSA-N
Safety Informationpictograms GHS09 signalword Warning hcodes H410 pcodes P273 - P391 - P501 RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Silver/silver chloride (60/40) paste for screen printing 901773-50G
Linear Formula: Ag/AgCl General descriptionThis product has a ratio of silver to silver chloride of 60/40.Features and BenefitsProduct Benefits- Applications in medical diagnostics, environmental sensors
- High conductivity
- Low curing temperature
Preparation NotePROCESSING- Screen Printing Equipment: semi-automatic, manual
- Ink Screen Life: >3 hours
- Screen Types: polyester, mesh 156 to 230 tpi
Note: Stainless Steel mesh is not recommended, since a paste component can become corrosive in the presence of moisture.Also, plastic palette knives should be used instead of metal knives.- Typical Drying Conditions: Dry at 60°C for 30minutes or 80°C for 10minutes in a box oven.
- Clean up solvent: ethoxyl propanol or seriocol
- Substrate: polyester, PVC, polycarbonate and alumina
Legal InformationProduct of Gwent Electronic Materials Ltd (GEM), part of Sun Chemical CorporationПараметрыdescription Coverage: 200 cm2 per g (using a 156 mesh polyester screen), Sheet resistivity:<100 miliohms per square (20 micron thick printed on alumina substrate) viscosity 2.0-5.5 Pa.s (Haake RS1 C20/2° TiL at 230 sec-1 at 25°C)
Safety Informationpictograms GHS05,GHS09 signalword Warning hcodes H290 - H410 pcodes P234 - P273 - P390 - P391 - P501 RIDADR UN 3082 9 / PGIII WGK Germany WGK 3 Flash Point F 192.2 °F Flash Point C 89 °C Узнать цену -
Stiron HIPS 3D Printing Filament TRD3D0039-1EA
NACRES: NA.23 General descriptionStiron HIPS 3D printing filament:- The perfect material for evaluating quick prints
- Ideal for ABS support as it can be solved in limonene
- The purity of the material renders a matte surface, pleasant to touch
- Technical prints with ease
Material Properties- Density: 1.04 g/cm3
- Water absorption: 0.1%
- Tensile modulus: 1800 MPa
- Tensile strain at yield: 1.5%
- Charpy Impact at 23°C: 12 kJ/m2
- MFR: 4g/10min
- Melting point: 240°C
ApplicationStiron HIPS 3D Printing Parameters- Extruder (nozzle) temperature: 220 +/-10 °C
- Bed temperature: 85+/-10 °C
- Print speed: 60-90 mm/s
- Fan: 0-30 %
- Minimum nozzle diameter: 0.3 mm
- Plate materials: blue tape, kapton tape, etc.
Параметрыdiam. 1.75 mm weight 1 kgeach
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Stiron HIPS 3D Printing Filament TRD3D0040-1EA
NACRES: NA.23 General descriptionStiron HIPS 3D printing filament:- The perfect material for evaluating quick prints
- Ideal for ABS support as it can be solved in limonene
- The purity of the material renders a matte surface, pleasant to touch
- Technical prints with ease
Material Properties- Density: 1.04 g/cm3
- Water absorption: 0.1%
- Tensile modulus: 1800 MPa
- Tensile strain at yield: 1.5%
- Charpy Impact at 23°C: 12 kJ/m2
- MFR: 4g/10min
- Melting point: 240°C
ApplicationStiron HIPS 3D Printing Parameters- Extruder (nozzle) temperature: 220 +/-10 °C
- Bed temperature: 85+/-10 °C
- Print speed: 60-90 mm/s
- Fan: 0-30 %
- Minimum nozzle diameter: 0.3 mm
- Plate materials: blue tape, kapton tape, etc.
Параметрыdiam. 1.75 mm weight 1 kgeach
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SunTronic® conductive graphite ink for flexographic printing 901970-250G
Empirical Formula (Hill Notation): C Molecular Weight: 12.01 NACRES: NA.23 General descriptionSunTronic GFT4600 flexo graphite ink is water-based graphite conductive ink designed for the production of conductive layers onto a variety of substrates via flexographic printing.
GFT4600 is appropriate for paper and cardboard substrates and also water-receptive polymer films and provides a unique combination of high-speed printability, fast drying, and conductivity in an easy-to-use ink system. GFT4600 can also be printed on plastic films bearing a water-receptive primerCautionPRINTING
GFT4600 is supplied as ready-for-use ink. Soft sediment may occur over time so thorough mixing prior to use is necessary. The ink may be diluted with water up to 3%, however sheet resistivity will increase slightly. Dilute with caution!
The below details are only a guide, and the final choice of flexo printing specifications may depend on substrate and web speed. To achieve maximum coverage, high volume anilox rolls are recommended (80-120 lpi with 14-22 BCM).
Continuous anilox rotation is required throughout the print run to avoid ink drying on flexo plate and anilox roll. GFT4600 should not be allowed to dry completely on printing equipment. Prompt cleaning with water is highly recommended. Anilox rolls should be also cleaned using a sonicating bath after each print run.
DRYING
GFT4600 is a fast drying ink that will dry to the touch between 150-300 feet per minute using standard dryers found on flexographic presses. Maximum conductivity can be achieved with further drying, inline or offline, using infrared (IR) dryers, high capacity forced hot air ovens and/or heated mandrels. Optimum drying conditions should be established for particular equipment used by the customer.Legal InformationSunTronic is a registered trademark of Sun Chemical, Inc.Параметрыdescription Sheet resistance: <100 /sq (flexo printed on SBS board with 18 BCM anilox roll), Specific gravity: 1.09g/cm3 viscosity 1300-1700 cP (Brookfield - low shear) storage temp. 2-8°C
Safety Informationpictograms GHS08 signalword Warning hcodes H351 pcodes P201 - P202 - P280 - P308 + P313 - P405 - P501 RIDADR NONH for all modes of transport WGK Germany nwg Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SunTronic® conductive silver ink for screen printing 901879-25G
NACRES: NA.23 General descriptionSunTronic Conductive Silver Ink AST6025 is a screen printable conductive ink specifically designed for printing fine line and fine pitch conductive traces.
The ink exhibits high viscosity, low slumping, excellent conductivity and environmental stability, and adhesion to various substrates, including glass, various metals, PET, and transparent conductive films.
AST6025 is specifically suitable for printing of fine interconnects, printed RF antennae, and bus bars for touch panels.CautionDRYING
Typical drying temperature may range from 120-200°C (248-392°F) depending on temperature tolerance of the substrate.Drying time may range from 2-30 minutes.Higher drying temperature and/or longer drying times will result in better electrical performance, adhesion and mechanical properties.
Optimum drying conditions should be established for particular equipment used by the customer.
PRINTING
AST6025 is supplied as ready-to-use ink. It should be stirred well prior to printing. AST6025 is suitable for use on hand, semi-automatic or fully automatic screen printing machines.
Typically, polyester or stainless screens with mesh count 325-430 threads/inch can be used depending on desired ink film thickness and resolution. For fine lines between 100 - 250 microns nominal line width, stainless screen mesh is preferred with mesh count between 325-400 threads/inch. For <100 microns line widths, 430 and higher stainless steel mesh counts are recommended.Legal InformationSunTronic is a registered trademark of Sun Chemical, Inc.Параметрыdescription Sheet resistivity: <0.010 /sq/mil (150°C/10 min), Solid content: 82-85% (120 °C), Volume resistivity: <2.5x10-5 .cm (150°C/30 min) viscosity 45-55 Pa.s storage temp. 2-8°C
Safety Informationpictograms GHS05,GHS07,GHS08,GHS09 signalword Danger hcodes H304 - H318 - H336 - H351 - H410 pcodes P201 - P273 - P280 - P301 + P310 + P331 - P305 + P351 + P338 + P310 - P308 + P313 Target Organs Central nervous system RIDADR UN 3082 9 / PGIII WGK Germany WGK 3 Flash Point F 212.0 °F Flash Point C 100 °C Узнать цену -
SunTronic® silver nanoparticle ink for inkjet printing
Empirical Formula (Hill Notation): Ag Molecular Weight: 107.87 NACRES: NA.23
Кат. номер 901975-2ML 901975-10ML General descriptionSunTronic® Nanosilver EMD5800 series is formulated for non-contact printing of conductive traces onto a variety of substrates.
EMD5800 is oil-based nanoparticle inks which demonstrates superior conductivity at low sintering temperatures with stable jetting performance and adhesion to temperature sensitive plastics.
It can be used in the manufacture of touch panel displays, printed RFID antennae, smart cards, sensors, security labels, touch switches and other printed electronics applications.CautionPrinting
EMD5800 is supplied as ready-to-use oil based inks, and can be printed on various deposition printers and jetted on through various piezo DOD inkjet printheads suitable for oil based inks, although full printhead compatibility will need to be verified in each case
Sintering
Sintering conditions may change for different ink film thicknesses. Typical sintering temperature may range from 100-200°C depending on temperature tolerance of the substrate. Sintering time may range from 10-60 minutes. Electrical resistance may be reduced with higher sintering temperature and/or longer sintering times.
Storage
Refrigerated storage at a temperature of 5-15°C is recommended. Agitation after refrigeration to assure proper dispersion is recommended.Legal InformationSunTronic is a registered trademark of Sun Chemical, Inc.Параметрыdescription Silver content: 45-50%, Sintering temperature: 100 - 150°C for 10 – 60 min, Solid content: 48-52%, Volume Resistivity: 5 – 25 ucm surface tension 25-28 dyn/cm viscosity 6-8 cP (Brookfield) storage temp. 2-8°C
Safety Informationpictograms GHS05,GHS08,GHS09 signalword Danger hcodes H304 - H314 - H373 - H410 pcodes P273 - P280 - P301 + P330 + P331 - P303 + P361 + P353 - P304 + P340 + P310 - P305 + P351 + P338 RIDADR UN2735 - class 8 - PG 2 - EHS - Amines, liquid, corrosive, n.o.s., HI: all WGK Germany WGK 3 Flash Point F 156.2 °F Flash Point C 69 °C Узнать цену -
SunTronic® UV curing dielectric green for screen printing 901973-250G
NACRES: NA.23 General descriptionDrying/Curing
DSU4606G can be cured with a 200-300 Watt/inch (80-120 Watt/cm) medium-pressure Mercury vapor arc lamps, or microwave initiated D-bulb equivalents. Optimum UV dosage should be around 650 mJ/cm2.
DSU4606G is a flexible, green UV curing dielectric designed to be screen printed as an insulating layer for crossovers in membrane switches and a variety of electronic & Printed circuitry constructions.
DSU4606G has excellent adhesion to both treated and untreated PET. It also adheres to a variety of substrates including PC, PI, glass, and ITO.
Typical Cured Deposits:
196 threads/inch (77 threads/cm): 0.6-0.8 mil
305 threads/inch (120 threads/cm): 0.3-0.5 mil
DSU4606G must be shielded from sunlight or high-intensity light to prevent on-screen curing during prolonged production stoppages.
Cleaning with thinner followed by cleaning with acetone is recommendedApplicationDSU4606G is supplied ready for use, but should be lightly stirred before use. It should not require reducing.
DSU4606G is suitable for use on hand; semi-automatic or fully automatic screen printing machines. Polyester or Stainless screens with mesh count 196-305 threads/inch (77-120 threads/cm) can be used depending on desired ink film thickness. Printing two layers is recommended for maximum dielectric properties and to minimize voids. A total cured deposit of 0.75-2.0 mil may be required to meet specific insulation targets.Legal InformationSunTronic is a registered trademark of Sun Chemical, Inc.Параметрыdescription Breakdown Voltage (DC): 3100 V/mil, Max. Service Temp.: 175°C, Specific Gravity: 1.26-1.27, Theoretical Coverage: 32-35 m2/kg/mil, Volume Resistivity: >1014 ohm.cm form liquid color green viscosity 20-30 poise (Brookfield CAP @25 °C) storage temp. 2-8°C
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H317 - H319 pcodes P261 - P264 - P280 - P333 + P313 - P337 + P313 - P362 + P364 RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F 230.9 °F Flash Point C > 110.5 °C Узнать цену -
SunTronic® UV curing jettable insulator for low-K dielectric applications 901974-250ML
General descriptionSunTronic jettable insulator is a UV-curing, inkjet printable insulator coating,suitable for low-K dielectric applications, printed electronics and related applications.
The insulator can be jetted through various piezo DOD inkjet printheads, although full printhead compatibility will need to be verified in each case. The product can be cured using an un-doped medium pressure mercury source. If over printing the dielectric with a SunTronic jettable silver ink then a cure dose of 300 mJ/cm2 is recommended.Legal InformationSunTronic is a registered trademark of Sun Chemical, Inc.Параметрыdescription Cure dose required (un-doped mercury): 100-300 mJ/cm2, Jetting temperature: 50°C surface tension 32-37 dyn/cm viscosity 11-13 cP (at jetting temperature) storage temp. 2-8°C
Safety Informationpictograms GHS07,GHS08,GHS09 signalword Danger hcodes H315 - H317 - H319 - H335 - H361 - H372 - H411 pcodes P201 - P260 - P264 - P273 - P280 - P391 Target Organs Respiratory system RIDADR UN 3082 9 / PGIII WGK Germany WGK 2 Flash Point F 204.8 °F Flash Point C 96 °C Узнать цену -
SunTronic®aqueous silver flexo ink 901876-20G
NACRES: NA.23 General descriptionSunTronic aqueous silver flexo ink AFT6700 is a water-based silver conductive ink designed for the production of printed antenna for radio frequency identification (RFID), conductive interconnects, and printed circuitry via flexographic printing.
AFT6700 is appropriate for paper and cardboard substrates and also water-receptive polymer films and provides a unique combination of high-speed printability, fast drying, and conductivity in an easy-to-use ink system. AFT6700 can also be printed on plastic films bearing a water-receptive primer.CautionDo not freeze.Preparation NoteProcessing and Handling Guidelines
PRINTING
AFT6700 is supplied as ready-for-use ink. Thinning is not recommended. Soft sediment may occur over time so thorough mixing prior to use is necessary.
The below details are only a guide, and the final choice of flexo printing specifications may depend on substrate and web speed. To achieve maximum coverage, high volume anilox rolls are recommended (80-120 lpi with 14-22 BCM). As an example, thickness of 3-4 microns can be achieved with a 160 line/inch and 20 BCM ART anilox (Praxair Technology, Inc.). Print tests have demonstrated that a soft flexographic plate such as Nyloflex ART (BASF) produces the highest quality graphics when used in conjunction with a medium-hard sticky back. A closed doctor-blade chamber is recommended.
Continuous anilox rotation is required throughout the print run to avoid ink drying on flexo plate and anilox roll. AFT6700 should not be allowed to dry completely on printing equipment. Prompt cleaning with water is highly recommended. Anilox rolls should be also cleaned using a sonicating bath after each print run.
DRYING
AFT6700 is a fast drying ink that will dry to the touch between 150-300 feet per minute using standard dryers found on flexographic presses. Maximum conductivity can be achieved with further drying, inline or offline, using infrared (IR) dryers, high capacity forced hot air ovens and/or heated mandrels.
Optimum drying conditions should be established for particular equipment used by the customer.Legal InformationSunTronic is a registered trademark of Sun Chemical, Inc.Параметрыdescription Sheet resistivity: 15 m/sq/mil, Specific gravity: 2.01g/cm3, VOC: <1.2 wt%, Volume Resistivity: <37.5 .cm viscosity 19-21 poise storage temp. 2-8°C
Safety Informationpictograms GHS09 signalword Warning hcodes H410 pcodes P273 - P391 - P501 WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Tenax PC-ABS 3D Printing Filament TRD3D0060-1EA
NACRES: NA.23 General descriptionTenax PC-ABS 3D Printing Filament:- Odourless composition and low warping
- Very high mechanical strenghth and toughness
- Obtain a shiny finish
- Certified for automotive
Material Properties- Density: 1.1 g/cm3
- Water absorption: 0.9%
- Tensile modulus: 2000 MPa
- Tensile stress: 43 MPa
- Tensile strain at break: 90%
- Vicat point: 108°C
- Heat deflection: 93°C
- Charpy notched impact at 23°C: 50 kJ/m2
- Charpy notched impact at -30°C: 50 kJ/m2
ApplicationTenax PC-ABS 3D Printing Parameters- Extruder (nozzle) temperature: 250 +/- 10 °C
- Bed temperature: 100 +/- 10 °C
- Print speed: 50-60 mm/s
- Fan: 0-20 %
- Minimum nozzle diameter: 0.4 mm
- Plate materials: blue tape, kapton tape, etc.
Параметрыdiam. 1.75 mm weight 500 geach
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Tenax PC-ABS 3D Printing Filament TRD3D0061-1EA
NACRES: NA.23 General descriptionTenax PC-ABS 3D Printing Filament:- Odourless composition and low warping
- Very high mechanical strenghth and toughness
- Obtain a shiny finish
- Certified for automotive
Material Properties- Density: 1.1 g/cm3
- Water absorption: 0.9%
- Tensile modulus: 2000 MPa
- Tensile stress: 43 MPa
- Tensile strain at break: 90%
- Vicat point: 108°C
- Heat deflection: 93°C
- Charpy notched impact at 23°C: 50 kJ/m2
- Charpy notched impact at -30°C: 50 kJ/m2
ApplicationTenax PC-ABS 3D Printing Parameters- Extruder (nozzle) temperature: 250 +/- 10 °C
- Bed temperature: 100 +/- 10 °C
- Print speed: 50-60 mm/s
- Fan: 0-20 %
- Minimum nozzle diameter: 0.4 mm
- Plate materials: blue tape, kapton tape, etc.
Параметрыdiam. 1.75 mm weight 500 geach
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Tin(IV) oxide nanoparticle ink
Linear Formula: SnO2 NACRES: NA.23
Кат. номер 901079-50ML 901079-10ML Application- This SnO2 nanoparticle ink is for charge selective layers in printed electronics.
- This SnO2 nanoparticle ink is for spin-coating, doctor blading, slot-die or inkjet printing.
Caution- Storage: In dark at room temperature.
- Prior to application: Shake, and filter through 0.2 or 0.45 µm PP filter. Do not use PTFE filter.
- Ink can be diluted with butanol.
- Thickness optimization may be necessary.
- Drying of deposited SnO2 films at >100 °C.
Legal InformationProduct of Avantama Ltd.ПараметрыQuality Level 100 description Solid content: 2.5 wt% crystalline SnO2 in the mixture of butanols form dispersion (translucent) color gray-brown particle size 7-20 nm viscosity 3.5 cP
Safety Informationpictograms GHS02,GHS05,GHS07 signalword Danger hcodes H226 - H302 - H315 - H318 - H335 - H336 pcodes P210 - P233 - P280 - P301 + P312 - P303 + P361 + P353 - P305 + P351 + P338 RIDADR UN1120 - class 3 - PG 3 - Butanols WGK Germany WGK 1 Flash Point F 84.2 °F - closed cup Flash Point C 29 °C - closed cup Узнать цену -
Tungsten oxide (WO3-x) nanoparticle ink
Linear Formula: WO3-x NACRES: NA.23
Кат. номер 793353-50ML 793353-5ML 793353-25ML General descriptionThis WO3-x nanoparticle ink is for slot-dye, spin-coating and doctor blading for the use as hole transport layer in printed electronics. Tungsten oxide nanoparticle ink is a hole-selective interface layer ink based on a colloidal suspension of tungsten oxide (WO3) nanoparticles in isopropanol. The average size of WO3 particle is optimized around 12-16 nm. Tungsten oxide nanoparticle exhibits high work function, processability and easy layer formation on hydrophilic as well as hydrophobic substrates.This WO3-x nanoparticle ink is universally applicable in normal and inverted architecture solar cells.
Annealing temperature <100°C.ApplicationWO3 nanoparticle ink can be applied in OPV cells as hole extraction layer (HEL) materials. Tungsten oxide nanoparticle ink can be mixed with PEDOT:PSS formulations in order to fine tune electronic and morphological dry layer properties (e.g. conductivity, surface roughness or layer porosity).Packaging5, 25 mL in poly bottleOther NotesPrior to application: Ultrasonicate and (optionally) filter through 0.45 µm PTFE filter
Working conditions: Application and film drying under nitrogen (or low humidity)
Post-treatment: Annealing of deposited WO3-x films at 80°C - 120°CLegal InformationProduct of Avantama Ltd.ПараметрыQuality Level 100 form (translucent, greenish to blueish nanoparticle dispersion) concentration 2.5 wt. % in 2-propanol particle size <50 nm (BET) density 0.7992 g/mL at 25 °C
Safety Informationpictograms GHS02,GHS07 signalword Danger hcodes H225 - H319 - H336 pcodes P210 - P305 + P351 + P338 Target Organs Central nervous system RIDADR UN1219 - class 3 - PG 2 - Isopropanol, solution WGK Germany WGK 1 Flash Point F 53.6 °F - closed cup Flash Point C 12 °C - closed cup Узнать цену -
Tungsten oxide nanoparticle ink
NACRES: NA.23
Кат. номер 807753-50ML 807753-5ML 807753-25ML ApplicationThe WO3-x nanoparticle ink is for inkjet printing for the use as hole transport layer in printed electronics. The WO3-x nanoparticle ink is universally applicable in normal and inverted architecture solar cells.Packaging5 mL in poly bottlePreparation Note- Storage: In dark at room temperature, Keep in plastic container (glass container can influence dispersion stability).
- Prior to application: Shake, ultrasonicate with sonic horn.
- Post-treatment: Annealing of deposited WO3 films at >120°C.
Legal InformationProduct of Avantama Ltd.ПараметрыQuality Level 100, description Solid content: 2.5 wt% crystalline WO3 in 2-propanol and propylene glycol, Viscosity: 6.1 ~ 10.1cP form dispersion concentration 2.5 wt. % work function -5.3--5.7 eV particle size 11-21 nm viscosity 8 cP
Safety Informationpictograms GHS02,GHS07 signalword Danger hcodes H225 - H319 - H336 pcodes P210 - P305 + P351 + P338 Target Organs Central nervous system RIDADR UN1219 - class 3 - PG 2 - Isopropanol, solution WGK Germany WGK 1 Flash Point F 69.8 °F Flash Point C 21 °C Узнать цену -
UV729 ASA 3D Printing Filament TRD3D0032-1EA
NACRES: NA.23 General descriptionUV729 ASA 3D printing filament:- Developed specifically for outdoor applications; UV 729 can withstand sunlight
- Exceptional mechanical resistance
- Matte finish.
- The surface finish allows easier manipulation post processing
- Prints like an ABS, heated bed or enclosed chamber recommended
Material Properties- Density: 1.08 g/cm3
- Tensile strengh at yield: 410 kg/cm2
- Flexural modulus: 19500 kg/cm2
- IZOD impact strength at 23 °C: 45 kg cm/cm
- IZOD impact strength at -30 °C: 6 kg cm/cm
- Heat deflection: 96 °C
- Vicat softening temperature: 94 °C
ApplicationUV729 ASA 3D Printing Parameters:- Extruder (nozzle) temperature: 245 +/-10 °C
- Bed temperature: 100 +/-10 °C
- Print speed: 60-70 mm/s
- Fan: 0-20 %
- Minimum nozzle diameter: 0.4 mm
- Plate materials: glass with glue, kapton tape, etc.
Application Notes:- Heated bed or enclosed chamber recommended
Параметрыdiam. 1.75 mm weight 1 kgeach
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
UV729 ASA 3D Printing Filament TRD3D0033-1EA
NACRES: NA.23 General descriptionUV729 ASA 3D printing filament:- Developed specifically for outdoor applications; UV 729 can withstand sunlight
- Exceptional mechanical resistance
- Matte finish.
- The surface finish allows easier manipulation post processing
- Prints like an ABS, heated bed or enclosed chamber recommended
Material Properties- Density: 1.08 g/cm3
- Tensile strengh at yield: 410 kg/cm2
- Flexural modulus: 19500 kg/cm2
- IZOD impact strength at 23 °C: 45 kg cm/cm
- IZOD impact strength at -30 °C: 6 kg cm/cm
- Heat deflection: 96 °C
- Vicat softening temperature: 94 °C
ApplicationUV729 ASA 3D Printing Parameters:- Extruder (nozzle) temperature: 245 +/-10 °C
- Bed temperature: 100 +/-10 °C
- Print speed: 60-70 mm/s
- Fan: 0-20 %
- Minimum nozzle diameter: 0.4 mm
- Plate materials: glass with glue, kapton tape, etc.
Application Notes:- Heated bed or enclosed chamber recommended
Параметрыdiam. 1.75 mm weight 1 kgeach
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Zinc oxide ink for inkjet printing 901091-25ML
Linear Formula: ZnO General descriptionHeliosInk H-SZ01034, semi conductive ink developed for the printed electronics is particularly well suited for OPV and PV. HeliosInk H-SZ01034, semi conductive ink shows great performance on Drop on Demand (DOD) inkjet printers, blade coating, and spin coating and is compatible with various flexible substrates (polyimide, PET, PET/ITO, etc.) but also Glass/ITO.Features and BenefitsProduct benefits:- Easy deposition under atmospheric conditions (temperature and pressure).
- Good optical performances (visible light transmission >90%).
- Non CMR ink.
- Compatible with ITO layer and Ag NWs layer.
- Compatible with most flexible substrates.
- Low drying temperature making printing onto flexible substrates possible.
- Thin layers are obtained (20 nm) with low roughness (RMS = 3±1 nm).
Preparation NoteTypical processing guideline:- Can be homogenized for 5 minutes in an ultrasonic bath in order to get rid of any aggregates.
- Filtration on a 0.45 µm PTFE filter syringe to avoid any nozzles clogging.
- Drying conditions: Oven, IR oven, vacuum oven.
- Clean-up solution: Ethanol/Acetone.
Legal InformationProduct of Genes′Ink.ПараметрыQuality Level 100, description Conductivity: 10-8-10-7 S/cm (before illumination) and 10-4-10-3 S/cm (under illumination with UV light), Valence band: 7.9 ± 0.1 eV, Work function: 4.0 ± 0.1 eV form liquid (dispersion) color slightly yellow to clear surface tension 29 mN/m±5 mN/m viscosity 10.5 mPa.s±3.0 mPa.s(20 °C) capacity 0.9 % loading (Nanoparticles loading)
Safety Informationpictograms GHS02,GHS05,GHS07 signalword Danger hcodes H226 - H302 - H315 - H318 - H335 - H336 - H412 pcodes P210 - P273 - P280 - P301 + P312 - P303 + P361 + P353 - P305 + P351 + P338 WGK Germany WGK 1 Flash Point F 111.2 °F - closed cup Flash Point C 44 °C - closed cup Узнать цену -
Zinc oxide ink for spin coating/slot-die coating 901081-25ML
Linear Formula: ZnO NACRES: NA.23 General description- HeliosInk H-SZ41029 semi conductive ink developed for the printed electronics is particularly well suited for flexible OLED and OPV.
- HeliosInk H-SZ41029 semi conductive ink shows great performance on spin coating and slot die coating and is compatible with various flexible substrates (polyimide, PET, PET/ITO, etc.) but also Glass/ITO.
Features and BenefitsProduct benefits:- Easy deposition under atmospheric conditions (temperature and pressure).
- Good optical performances (visible light transmission >90%).
- Non CMR ink.
- Compatible with ITO layer and Ag NWs layer.
- Compatible with most flexible substrates.
- Low drying temperature making printing onto flexible substrates possible.
- Thin layers are obtained (20 nm) with low roughness (RMS = 3±1 nm).
Preparation NoteTypical processing guideline:- Can be homogenized for 5 minutes in an ultrasonic bath in order to get rid of any aggregates.
- Drying conditions: Oven, IR oven, vacuum oven.
- Clean-up solution: Ethanol/Acetone.
Legal InformationProduct of Genes′Ink.ПараметрыQuality Level 100, description Conductivity: 10-8-10-7 S/cm (before illumination) and 10-4-10-3 S/cm (under illumination with UV light), Valence band: 7.9 ± 0.1 eV, Work function: 4.0 ± 0.1 eV form liquid (dispersion) color light yellow surface tension 20 mN/m±5 mN/m viscosity <4 mPa.s(20 °C) capacity 0.9 % loading (Nanoparticles loading)
Safety Informationpictograms GHS02,GHS07 signalword Danger hcodes H225 - H319 - H336 - H412 pcodes P210 - P273 - P305 + P351 + P338 Target Organs Central nervous system RIDADR UN1219 - class 3 - PG 2 - Isopropanol, solution WGK Germany WGK 1 Flash Point F 58.1 °F - closed cup Flash Point C 14.5 °C - closed cup Узнать цену -
Zinc oxide nanoparticle ink
Linear Formula: ZnO
Кат. номер 793361-50ML 793361-5ML 793361-25ML General descriptionZinc oxide nanoparticle ink are nanoparticle-based printing inks allowing processing temperatures of 80°C. Zinc oxide nanoparticle ink is an electron selective interface layer ink containing zinc oxide (ZnO) nanoparticles in isopropanol. ZnO nanoparticle ink functions well as electron extraction layer (EEL) materials in solar cells.ApplicationThis ZnO nanoparticle ink is for slot-dye, spin-coating, and doctor blading for the use as electron transport layer in printed electronics. This ZnO nanoparticle ink is universally applicable in normal and inverted architecture.
Annealing temperature <100°C.Packaging5, 25 mL in poly bottleOther NotesPrior to application: Ultrasonicate and (optionally) filter through 0.45 µm PTFE filter
Post-treatment: Annealing of deposited ZnO films at 80°C - 120°CLegal InformationProduct of Avantama Ltd.ПараметрыQuality Level 100 form dispersion (translucent, yellowish) concentration 2.5 wt. % (crystalline ZnO in 2-propanol) particle size 10-15 nm density 0.800 g/mL at 25 °C
Safety Informationpictograms GHS02,GHS07,GHS09 signalword Danger hcodes H225 - H319 - H336 - H411 pcodes P210 - P273 - P305 + P351 + P338 Target Organs Central nervous system RIDADR UN1993 - class 3 - PG 2 - EHS - VP > 110kPa - Flammable liquids, n.o.s., HI: all WGK Germany WGK 1 Flash Point F 53.6 °F Flash Point C 12 °C Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
