Poly(3,4-ethylenedioxythiophene), bis-poly(ethyleneglycol), lauryl terminated 687316-25G
Please follow this link for Aedotron/Oligotron selection guide table,.
Aedotron™ polymers are solvent-dispersable forms of PEDOT. These are copolymers of doped PEDOT and a flexible, soluble polymer such as poly(ethylene glycol) (PEG). These colloidal dispersions are stabilized by the highly solvated PEG chains which sterically limit the aggregation of the PEDOT blocks. Aedotron polymers are neither acidic nor corrosive, it easily disperses in polar aprotic solvents. Aedotron™ C3-NM is a triblock copolymer.
Nitromethane dispersions can be used to cast thin films on glass, ITO, silicon wafers and many polymeric substrates. Compatibility of the polymeric substrate with nitromethane should be tested in each case. Coat the substrate with a "pool" of the nitromethane dispersion. Thin transparent films are typically spun at 1000 RPM or higher speeds, but more conducting films can be obtained at lower speeds. A single layer spun at 1000 RPM is typically 75 nm thick.
Conducting polymer dispersion suitable for making conducting films, anti-static layers and transparent electrodes for electroluminescent lamps.
25 g in glass bottle
The copolymer structure renders the conducting polymer PEDOT highly dispersible in organic solvents. Nitromethane has a suitable volatility for spin coating.
Store this product at room temperature (do not refrigerate or freeze). Some settling will normally occur. Agitate, sonicate, and filter prior to use. A plug of glass wool in a pipette can be used for easy filtration. The shelf life of this product will vary depending on how it is stored and handled. Product should be discarded if heavy aggregation occurs, or if sonication / filtering are inadequate to produce a good casting solution.
Aedotron is a trademark of TDA Research, Inc.
form | liquid (dispersion) |
Quality Level | 100, |
contains | perchlorate as dopant |
composition | Acetonitrile, 4-8 wt. % , Aedotron™- C3 polymer, 0.2-0.7 wt. % , Nitromethane, 90-95 wt. % , proprietary processing additive, 0.1-0.7 wt. % , Propylene glycol, 0.0-0.3 wt. % |
concentration | 0.5-0.9 wt. % (content of dispersion), 0.7 wt. % (dispersion in nitromethane) |
surface resistivity | 600-3000 /sq |
transmittance | 70-85% |
particle size | 200-600 nm |
conductivity | 10-60 S/cm |
pictograms | GHS02,GHS07,GHS08 |
signalword | Danger |
hcodes | H225 - H302 + H332 - H351 - H361fd |
pcodes | P201 - P202 - P210 - P301 + P312 - P304 + P340 + P312 - P308 + P313 |
RIDADR | UN1261 - class 3 - PG 2 - Nitromethane, solution |
WGK Germany | WGK 2 |
Flash Point F | 71.6 °F - closed cup |
Flash Point C | 22 °C - closed cup |