OFET & OPV Materials
- Сортировать:
- Вид таблицей
-
P3OT 682799-250MG
Linear Formula: (C12H18S)n CAS Number: 104934-51-2 NACRES: NA.23 General descriptionPoly(3-octylthiophene-2,5-diyl) (P3OT) is a conducting polymer that is a class of polyalkylthiophene with intrinsic photoluminescence and good electrochemical properties. It can be prepared by oxidative polymerization of 3-octylthiophene (3OT).ApplicationP3OT can be used as a conjugating polymer for the fabrication of organic electronic based devices which include photovoltaic cells, flexible electronics, light emitting electrochemical cells and solar cell based applications.
Conducting polymer.
Rechargeable battery electrodes, electrochromic devices, chemical and optical sensors, light-emitting diodes, microelectrical amplifiers, field-effect transistors and non-linear optical materials.
Used in organic field-effect transistors and in polymer-based solar cells.Packaging250 mg in glass bottleFeatures and BenefitsGood processability, environmental stability and electroactivity.Параметрыmaterial black grade electronic grade description Band gap: 1.7 eV assay 99.995% trace metals basis form solid mol wt average Mn ~25,000 mp 198-211 °C Orbital energy HOMO -5.25 eV , LUMO -3.55 eV A OPV Device Performance ITO/PEDOT:PSS/P3OT:PC61BM (1:2)/LiF/Al - Short-circuit current density (Jsc): 5.55 mA/cm2
- Open-circuit voltage (Voc): 0.5 V
- Fill Factor (FF): 0.33
- Power Conversion Efficiency (PCE): 0.91 %
semiconductor properties P-type (mobility=104 - 101 cm2/V·s)
Safety InformationPersonal Protective Equipment Eyeshields,, Gloves,, type N95 (US), RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PBDB-T 901099-100MG
Linear Formula: (C68H78O2S8)n CAS Number: 1415929-80-4 ApplicationPBDB-T, a conjugated push-pull medium bandgap polymeric donor, can be used as a donor molecule that can be used in polymeric solar cells (PSCs). It can also be used in the fabrication of organic thin-film transistors (OTFTs).Параметрыdescription Band gap: 1.8 eV, Limited solubility in CHCl3 Quality Level 100, mol wt Mw >50,000 by GPC (GPC standard: PS) solubility chlorobenzene: soluble, dichlorobenzene: soluble Orbital energy HOMO -5.28 eV , LUMO -3.48 eV A PDI <3.0
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PBDB-T-2Cl 906352-100MG
Linear Formula: (C68H76C12O2S8)n CAS Number: 2239295-71-5 ApplicationHigh-Efficiency Organic Solar Cells (OPVs)
Polymeric donor material
LUMO=3.57 eV
HOMO=5.32 eV
OPV Device Performance :
PBDB-T-2Cl:IT-4F
Voc= 0.86V
Jsc= 21.46 mA/cm2
FF= 0.75
PCE=13.9%
PBDB-T-2Cl (or PM7) is a wide bandgap polymer donor (n-type semiconductor) containing chlorinated thienyl benzodithiophene (BDT-2Cl) used in high performance polymer solar cells (PSCs). PBDB-T-2Cl-based devices exhibit higher open circuit voltage (Voc) than the PBDB-T-2F-based devices, due to lower molecular energy levels of PBDB-T-2Cl, and leading to an outstanding power conversion efficiency of over 14%.
In general, chlorination is more effective than fluorination in downshifting the molecular energy levels and broadening the absorption spectra.Параметрыdescription Band gap: 1.95 eV, Solubility:Soluble in 1,2-Dichlorobenzene form particles mol wt 50,000-100,000 g/mol by GPC color Fine solubility chlorobenzene: soluble, chloroform: soluble Orbital energy HOMO -5.52 eV , LUMO -3.57 eV PDI 2‑4
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PBDB-T-2F 906336-100MG
Linear Formula: (C68H76F2O2S8)n CAS Number: 1802013-83-7 ApplicationHigh-Efficiency Organic Solar Cells (OPVs)
Polymeric donor material
LUMO=3.6 eV
HOMO=5.5 eV
OPV Device Performance:
PBDB-T-2F: ITIC-F (1:1 w/w)
Voc= 0.84V
Jsc= 22.2 mA/cm2
FF= 0.725
PCE=13.5%
PBDB-T-2F (or PM6) is a wide bandgap polymer donor (n-type semiconductor) containing fluorinated thienyl benzodithiophene (BDT-2F) used in high performance polymer solar cells (PSCs). PBDB-T-2F possesses high crystallinity and strong - stacking alignment, which are favourable to charge carrier transport and hence suppress recombination in devices. PBDBT-2F based PSCs were reported to have thickness and area insensitive performance and is a promising candidate for large-scale roll-to-roll manufacturing of high-efficiency polymer solar cells.
For example, recently, new study have shown PBDB-T-2F:IT-4F(Sigma Aldrich Cat. No. 901423) based PSCs yielded an impressive PCE of 13.5% due to the synergistic effect of fluorination on both donor and acceptor, which is among the highest values recorded in the literatures for PSCs to date [1]. The PBDB-T-2F:IT-4F baed PSCs also showed good storage, thermal and illumination stabilities with respect to the efficiency. High efficiency of >11% was maintained for a wide range of film area and thickness. When paired with selenopheno[3,2-b]thiophene-based narrow-bandgap non-fullerene acceptor, an impressive efficiency of 13.3 % was obtained with thickness-insensitive feature.
It has also been previously reported, PBDB-T-2F when paired with narrow band-gap small molecule acceptor 2,2-((2Z,2Z)-((4,4,9,9-tetrahexyl-4,9-dihydro-s-indaceno[1,2-b:5,6-b]dithiophene-2,7-diyl)bis(methanylylidene))bis(3-oxo-2,3-dihydro-1H-indene-2,1-diylidene))dimalononitrile (IDIC), the as-cast film (without extra treatments) showed an outstanding power conversion efficiency (PCE) of 11.9%, a record value for as-cast polymer solar cells. Moreover, the performance of PBDB-T-2F:IDIC based devices is insensitive to the active layer thickness (95-255 nm) and device area (0.20-0.81 cm2), and thus is a promising candidate for future roll-to-roll mass manufacturing and practical application of highly efficient PSCs.
It has also been reported, PBDB-T-2F possesses a strong absorption in the short wavelength region of 300-685 nm with a large bandgap of 1.80 eV, which is complementary to that of ITIC (1.55 eV) and facilitates achieving high short-circuit current (Jsc) in PSCs. Moreover, PBDB-T-2F shows a deep HOMO level of 5.50 eV, a strong crystallinity and a dominant face on packing, which helps to achieve a high open-circuit voltage (Voc) and fill factor (FF) in PSCs.Параметрыdescription Band gap: 1.9 eV form particles mol wt Mw 80,000-200,000 g/mol by GPC color Fine solubility chlorobenzene: soluble, chloroform: soluble, dichlorobenzene: soluble Orbital energy HOMO -5.5 eV , LUMO -3.6 eV A PDI 24
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PBDB-T-SF 906344-100MG
Linear Formula: (C68H76F2O2S10)n ApplicationPBDB-T-SF is a fluorinated wide-bandgap polymeric donor (n-type semiconductor) with relatively deep highest occupied molecular orbital (HOMO) energy level. It has been used in high performance polymer organic solar cells (PSCs).
HOMO =5.40eV
LUMO =3.60eV
Polymer organic solar cells (PSCs) device performance:
Device based on PBDB-T-SF:NCBDT-4Cl
Before any post-treatment
PCE= of 13.1%
After device optimizations
Voc = 0.85V
Jsc = 2.35 mA /cm2
FF = 74.3%
PCE >14%
Energy loss = 0.55 eV
The improved performance was attributed to the more efficient photo-electron conversion process in the optimal device.
Device performance based on PBDB-T-SF:ITIC-F as active layer
(ITO)/ZnO/active layer/MoO3/Al
Voc = 0.88 V
Jsc = 20.50 mA/cm2
FF = 71.9%
PCE = 13.1%
Energy loss = 0.66 eVПараметрыdescription Band gap: 1.8 eV form granular mol wt Mw 80,000 color purple, Shine solubility chlorobenzene: soluble, chloroform: soluble, soluble (o-dichlorobenzene) Orbital energy HOMO -5.4 eV , LUMO -3.6 eV A PDI ~2.5
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PBDT(EH)-TPD(Oct) 773514-100MG
Linear Formula: (C40H53NO4S3)n CAS Number: 1223479-75-1 NACRES: NA.23 General descriptionPBDT(EH)-TPD(Oct) is a conducting polymer with benzothiophene as the electron donor and thieno[3,4-c]pyrrole-4,6-dione as the electron withdrawing units. It can be used to form a π-conjugating system for the development of a variety of high performance electrochemical devices.ApplicationUse in organic high efficiency photovoltaic cells (PCE 6.8%) and field effect transistors.
PBDT(EH)-TPD(Oct) is a semiconducting polymer which can be used in the fabrication of polymeric solar cells and photovoltaic cells with high power conversion efficiency.Packaging100 mg in glass insertПараметрыmp >300 °C Quality Level 100, max 627 nm (thin film) Orbital energy 1.83 eV (opt), HOMO 5.4 eV , LUMO 3.75 eV A P-typeOFET Device Performance Mobility - P-type
- Mobility: 2 x 10^-4 cm2/V·s
OPV Device Performance ITO/PEDOT:PSS/ PBDTTPD:fullerene (1:1.5 by weight)/Ca/AlAdv. Energy Mater. 2012, 3, 220 - Short-circuit current density (Jsc): 11.1 mA/cm2
- Open-circuit voltage (Voc): 0.89 V
- Fill Factor (FF): 60
- Power Conversion Efficiency (PCE): 6 %
storage temp. 2-8°C
Safety Informationpictograms GHS07 signalword Warning hcodes H302 RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PBDTS-TDZ 901871-100MG
Linear Formula: [C68H92N2S9]n NACRES: NA.23 ApplicationPBDTS-TDZ is a wide bandgap polymer that can be used as a donor for the fabrication of organic solar cells. It has alkylthio side chains, which help in strong optical absorption and high crystallinity. PBDTS-TDZ forms a composite with ITIC, which has an efficiency of ~18% for organic tandem solar cells.Параметрыdescription Band gap: 2.09 eV form powder mol wt average Mn >30000, average Mw >60000 solubility THF: soluble, chlorobenzene: soluble, chloroform: soluble, dichlorobenzene: soluble, soluble (1,2,4-trimethylbenzene), toluene: soluble, xylene: soluble max 510 nm±10 nm (Solution) Orbital energy HOMO -5.39 eV , LUMO -2.8 eV A PDI <2.5
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PBDTTT-C-T 901067-100MG
Linear Formula: (C48H56OS6)n CAS Number: 1393932-53-0 ПараметрыQuality Level 100, description Band gap: 1.86 eV assay 99% trace rare earth metals basis mol wt Mw 80,000-150,000 (GPC, PS standard) solubility chlorobenzene: soluble, chloroform: soluble, dichlorobenzene: soluble Orbital energy HOMO -5.11 eV , LUMO -3.25 eV A PDI 2.0
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PBDTTT-CF 772402-100MG
Empirical Formula (Hill Notation): (C40H51FO3S4)n CAS Number: 1379592-65-0 NACRES: NA.23 General descriptionPBDTTT-CF is a low band-gap conducting polymer which contains dialkoxyl benzodithiophene and fluorine substituted thieno[3,4-b]thiophene groups. It can be used as a donor material with a power conversion efficiency of 6.77%.ApplicationPBDTTT-CF is mainly used in the fabrication of polymeric solar cells and organic solar cells.
Low band gap polymer; for high-efficiency organic solar cells (OPVs) application
OPV Device Structure: ITO/PEDOT:PSS/PBDTTT-CF :PC71BM/Ca/Al; achieving power conversion efficiency as high as 6.77%; as certified by the National Renewable Energy Laboratory (NREL).Packaging100 mg in glass insertПараметрыdescription Band gap: 1.77 eV Quality Level 100, mol wt average Mw 53,000-83,000 by GPC Orbital energy HOMO -5.22 eV , LUMO -3.45 eV A semiconductor properties P-type (mobility=7x104 cm2/V·s)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PBTTPD 745901-100MG
Linear Formula: (C46H69NO2S3)n CAS Number: 1240372-42-2 NACRES: NA.23 General descriptionHOMO: -5.56 eV
LUMO: -3.10 eV
UV absorption: max = 572 nm;Eg = 1.82 eV
Solubility: This polymer can be dissolved easily in hot chloroform;hot chlorobenzene;hot dichlorobenzene
PBTTPD is a donor-acceptor based high crystalline conducting polymer. It has thieno[3,4-c]pyrrole-4,6-dione (TPD), which acts as the electron-withdrawing group. Bi(dodecyl)thiophene based donor groups facilitate the polymeric unit with crystallinity and low HOMO energy levels. It shows good hole mobility and open circuit voltage (VOC).ApplicationPBTTPD is majorly used as a conjugating polymer in the fabrication of organic solar cells (OSCs) and organic photovoltaic cells (OPVs). It has a power conversion efficiency (PCE) of 7.3% and a VOC of 0.92V.- High-Efficiency Organic Solar Cells (OPVs)
- Power conversion efficiency (PCE): 7.3%
- Open circuit voltage (Voc): 0.92 V
- Short circuit current density (Jsc): 13.1 mA/cm2
- Fill factor (FF): 0.61
Packaging100 mg in glass insertПараметрыdescription Band gap: 1.82 eV Quality Level 100, mol wt average Mn 3,500-20,000 g/mol max 572 nm (thin film) Orbital energy HOMO -5.56 eV , LUMO -3.1 eV A PDI 1.22.5
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PBTTT-C12 753963-250MG
Linear Formula: (C38H54S4)n CAS Number: 888491-18-7 NACRES: NA.23 Packaging250 mg in glass insertLegal InformationSold under license from Merck KGaA, Darmstadt, Germany.Параметрыmol wt Mw 20,000-80,000 Quality Level 100, semiconductor properties (mobility=0.2-0.6 cm2/V·s)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PBTTT-C14 753971-250MG
Linear Formula: (C42H62S4)n CAS Number: 888491-19-8 NACRES: NA.23 General descriptionPBTTT-C14 is a semiconducting material which is used as a hole transporting material (HTM). It has an ordered structure and crystal orientation which result in a high performance conducting material.ApplicationPBTTT-C14 based conjugated polymers can potentially be used in combination with fullerenes and P3HT for the fabrication of a wide range of devices like organic field effect transistors (OFETs), organic photovoltaics (OPVs), solar cells (SCs) and photodiodes.Packaging250 mg in glass insertLegal InformationSold under license from Merck KGaA, Darmstadt, Germany.Параметрыmol wt Mw >50,000 Quality Level 100, mp >200 °C semiconductor properties (mobility=1.3 cm2/V·s)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PCDTBT 753998-100MG
Linear Formula: (C43H47N3S3)nC12H10 CAS Number: 958261-50-2 NACRES: NA.23 General descriptionSoluble in THF, chloroform, chlorobenzene, dichlorobenzene, and 1,2,3-trichlorobenzene
PCDTBT is a carbozole based semiconducting co-polymer that is used as a donor material with a low band gap and a power efficiency of 9%. It has a quantum efficiency close to 100% that makes it a viable alternative of P3HT for a wide range of photovoltaics based applications.ApplicationPCDTBT blend with PCBM as a nanocomposite can be used as a donor/acceptor material for the fabrication of photovoltaic solar cells and photovoltaic inks. It may also be used as an active layer that can be used in the development of organic field effect transistors (OFETs) for the parts per million (ppm) level detection of NO2 gas.Packaging100 mg in glass insertПараметрыdescription Band gap: 1.9 eV Quality Level 100, mol wt average Mw 100,000-140,000 loss 0.5 wt. % TGA, 409 °C mp 270-300 °C transition temp Tm >400 °C max 576 nm Orbital energy HOMO -5.5 eV , LUMO -3.6 eV A OPV Device Performance ITO/MoO3-Al/PCDTBT:PC71BM/MoO3/Al - Short-circuit current density (Jsc): 10.88 mA/cm2
- Open-circuit voltage (Voc): 0.88 V
- Fill Factor (FF): 0.71
- Power Conversion Efficiency (PCE): 6.77 %
- Short-circuit current density (Jsc): 11.32 mA/cm2
- Open-circuit voltage (Voc): 0.88 V
- Fill Factor (FF): 0.69
- Power Conversion Efficiency (PCE): 6.9 %
- Short-circuit current density (Jsc): 9.7 mA/cm2
- Open-circuit voltage (Voc): 0.82 V
- Fill Factor (FF): 0.61
- Power Conversion Efficiency (PCE): 5.3 %
semiconductor properties P-type (mobility=6x105 cm2/V·s)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PCPDTBT 754005-100MG
Linear Formula: (C31H38N2S3)n CAS Number: 920515-34-0 NACRES: NA.23 General descriptionSoluble in cyclohexane, toluene, chloroform, and THF
PCPDTBT is a low band gap polymer that is used as a donor material with a high photovoltaic efficiency. It can form blends with a variety of conducting polymers which can be used to enhance the power conversion efficiency (PCE) in an electrochemical device.ApplicationPCPDTBT can form a donor/acceptor blend with PCBM which can be used as a polymeric backbone for use in the fabrication of organic solar cells.Packaging100 mg in glass insertПараметрыQuality Level 100, description Band gap: 1.75 eV mol wt average Mw 7,000-20,000 loss 0.5 wt. % TGA, 350 °C mp >400 °C max 700 nm Orbital energy HOMO -5.3 eV , LUMO -3.55 eV A OPV Device Performance ITO/PEDOT:PSS/PCPDTBT:PC61BM/Al - Short-circuit current density (Jsc): 16.2 mA/cm2
- Open-circuit voltage (Voc): 0.62 V
- Fill Factor (FF): 0.55
- Power Conversion Efficiency (PCE): 5.2 %
semiconductor properties P-type (mobility=2x102 cm2/V·s)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PDBT-T1 901097-100MG
Linear Formula: (C72H78O2S10)n CAS Number: 1701403-91-9 NACRES: NA.23 Параметрыdescription Band gap: 1.93 eV Quality Level 100, mol wt Mw 20,000-50,000 (GPC, PS standard) solubility soluble (hot o-dichlorobenzene) Orbital energy HOMO -5.36 eV , LUMO -3.43 eV A
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PDI-DPP-PDI 901143-100MG
Empirical Formula (Hill Notation): C110H118N8O10S2 CAS Number: 2083628-79-7 Molecular Weight: 1776.29 Legal InformationSold under Material Transfer Agreement with Gregory Welch group at University of Calgary.Параметрыdescription Band gap: 1.6 eV Quality Level 100, form powder Orbital energy HOMO -5.3 eV , LUMO -3.7 eV SMILES string O=C1C(C2=C(C3=CC=C(C4=CC(C(N(C(CC)CC)C5=O)=O)=C(C5=CC(N6CCCCCC)=C78)C7=C4C9=CC=C%10C%11=C(C(N(C(CC)CC)C%10=O)=O)C=C6C8=C9%11)S3)N1CCCCCCCC)=C(C%12=CC=C(C%13=CC(C(N(C(CC)CC)C%14=O)=O)=C(C%14=CC(N%15CCCCCC)=C%16%17)C%16=C%13C%18=CC=C%19C%20=C(C(N(C(CC)CC)C%
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PDPP2T-TT-OD 791989-100MG
Linear Formula: (C60H90N2O2S4)n CAS Number: 1444870-74-9 NACRES: NA.23 General descriptionPDPP2T-TT-OD is thiophene based conducting polymer with diketopyrrolo-pyrrole (DPP) as the electron deficient group and octyldodecyl acting as a pendant attachment. Its structure has a DPP-thiophene and a variable bithiophene (2T). It has a high charge carrying mobility that makes it useful in the development of organic electronics based devices.ApplicationPDPP2T-TT-OD can be used as a π-conjugating polymer that can be used in the fabrication of a variety of devices such as organic thin film transistors (OTFTs), photovoltaic cells, polymeric solar cells and field effect transistors (FETs).
Xerox demonstrated device performance on a n-doped silicon wafer with 100 - 300 nm native SiO2 dielectric modified with an octadecyltrichlorosilane self-assembled
monolayer. An XSC4p film was deposited by spin-coating a 0.5 – 0.7 wt. % polymer solution at 1000 rpm for 60 sec. The film was dried in a vacuum oven for 10 min at 80
°C and then thermally annealed at 140 °C for 10 min. Gold source-drain electrodes were deposited by vacuum evaporation using a shadow mask (90 micrometer channels).
The electrical performance was characterized using a Keithley SCS-4200 system. The reported mobility is the average saturated mobility of four devics ± the standard
deviation.Packaging100 mg in glass insertLegal InformationProduct of Xerox®. Xerox® is a registered trademark of Xerox Corporation.
Xerox is a registered trademark of Xerox CorporationПараметрыform solid (dark blue) Quality Level 100, mol wt average Mw 40,000-60,000 by GPC mp >200 °C max 820 nm (thin film) Orbital energy HOMO 5.2 eV A OFET Device Performance Bottom gate top contact device with silane modified SiO2 dielectric.Processing method spin coating; thermal annealing at 140 °C/ 10 min - Semiconductor Type:
- Mobility: 0.60 cm2/V·s
- On/Off Ratio: 10^6 - 10^7
PDI 2.53.0
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P261 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PEDOT-Iron(III) oxide preparation 679283-250MG
Linear Formula: (C6H4O2S)n : Fe2O3 General descriptionPrepared following procedure described in Zhang, X., et al., Macromolecules 2006, 39, 470. The preparation includes nm-scale tubular PEDOT structures decorated with Iron(III) oxide.Packaging250 mg in glass insertSafety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Pentacene
Empirical Formula (Hill Notation): C22H14 CAS Number: 135-48-8 Molecular Weight: 278.35 Beilstein/REAXYS Number: 1912418 EC Number: 205-193-7 MDL number: MFCD00003710 PubChem Substance ID: 24898247 NACRES: NA.23
Кат. номер P1802-1G P1802-100MG P1802-5G P1802-50MG General descriptionPentacene is a popular organic semi conductor. Upon deposition on any insulating substrate, the molecules organize to form polycrystalline films. The pentacene films show good transport properties. The hydrogen atoms which surround the carbon backbone are less electronegative than the carbon backbone itself and lend some electron density to the delocalized pi-electron cloud. It can also form large crystals.
Pentacene belongs to the class of fused polycyclic hydrocarbons that are a part of the acene family with five rings. It is majorly utilized in electronic applications due to its high hole mobility of 1200 cm2V1s1 and fluorescent absorption peak at the wavelength of 578 nm.ApplicationPentacene can be functionalized by treating it with poly(4-vinyl phenol) (PVP), which can be used to reduce the surface energy of organic thin film transistors (OTFTs) and increase the hole mobility by 109%. It is mainly used in the fabrication of field effect transistors, which can be doped with iodine to increase the threshold voltage up to 140 V.Packaging1 g in glass insert
5 g in glass bottle
100 mg in glass insert
Bottomless glass bottle. Contents are inside inserted fused cone.ПараметрыQuality Level 100, assay 99% mp 372-374 °C (subl.) solubility organic solvents: slightly soluble Orbital energy HOMO 5 eV , LUMO 3 eV A OPV Device Performance ITO/pentacene/C60/BCP/Al - Short-circuit current density (Jsc): 15 mA/cm2
- Open-circuit voltage (Voc): 0.36 V
- Fill Factor (FF): 0.5
- Power Conversion Efficiency (PCE): 2.7 %
semiconductor properties P-type (mobility=0.4-3 cm2/V·s) (on/off ratio=1E5-1E8) SMILES string c1ccc2cc3cc4cc5ccccc5cc4cc3cc2c1 InChI 1S/C22H14/c1-2-6-16-10-20-14-22-12-18-8-4-3-7-17(18)11-21(22)13-19(20)9-15(16)5-1/h1-14H InChI key SLIUAWYAILUBJU-UHFFFAOYSA-N
Safety InformationPersonal Protective Equipment Eyeshields,, Gloves,, type N95 (US), RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Pentacene 684848-1G
Empirical Formula (Hill Notation): C22H14 CAS Number: 135-48-8 Molecular Weight: 278.35 Beilstein/REAXYS Number: 1912418 EC Number: 205-193-7 MDL number: MFCD00003710 PubChem Substance ID: 329760927 NACRES: NA.23 General descriptionTGA/DSC Lot specific traces available upon requestPackaging1 g in glass bottleПараметрыgrade sublimed grade Quality Level 100, assay 99.9% trace metals basis mp 372-374 °C (subl.) solubility organic solvents: slightly soluble(lit.) Orbital energy HOMO 5 eV , LUMO 3 eV A OPV Device Performance ITO/pentacene/C60/BCP/Al - Short-circuit current density (Jsc): 15 mA/cm2
- Open-circuit voltage (Voc): 0.36 V
- Fill Factor (FF): 0.5
- Power Conversion Efficiency (PCE): 2.7 %
semiconductor properties P-type (mobility=0.4-3 cm2/V·s) (on/off ratio=1E5-1E8) SMILES string c1ccc2cc3cc4cc5ccccc5cc4cc3cc2c1 InChI 1S/C22H14/c1-2-6-16-10-20-14-22-12-18-8-4-3-7-17(18)11-21(22)13-19(20)9-15(16)5-1/h1-14H Inchi Key SLIUAWYAILUBJU-UHFFFAOYSA-N
Safety InformationPersonal Protective Equipment Eyeshields,, Gloves,, type N95 (US), RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Pentacene-N-sulfinyl-tert-butylcarbamate
Empirical Formula (Hill Notation): C27H23NO3S CAS Number: 794586-44-0 Molecular Weight: 441.54 PubChem Substance ID: 329762123 NACRES: NA.23
Кат. номер 699306-100MG 699306-500MG Packaging100, 500 mg in poly bottleApplicationPhotopatternable pentacene precursor highly solube in apolar organic solvents (halogenated solvents, THF). Converted to pentacene in thin (e.g. spin-cast) films by heating under N2 atmosphere for one hour at 150 °C. Spin-coated thin films of the pentacene precursor can be patterned by exposure to UV light in the presence of a photoacid generator (e.g. 531014), followed by a brief heating (5 min. at 130 °C and washing away of an un-converted precursor. Organic thin film transistors fabricated by solution processing of this precursor showed mobilities of 0.13 cm2V-1s-1 and on/off ratio 2 x 105.ПараметрыQuality Level 200, assay 99% (HPLC) mp >300 °C solubility THF: soluble 1 mg/mL, ethanol: slightly soluble 1 mg/mL, isopropanol: slightly soluble 1 mg/mL, methanol: slightly soluble 1 mg/mL SMILES string CC(C)(C)OC(=O)N1C2c3cc4ccccc4cc3C(c5cc6ccccc6cc25)S1=O InChI 1S/C27H23NO3S/c1-27(2,3)31-26(29)28-24-20-12-16-8-4-6-10-18(16)14-22(20)25(32(28)30)23-15-19-11-7-5-9-17(19)13-21(23)24/h4-15,24-25H,1-3H3 Inchi Key VQUHUWBRYQBGLV-UHFFFAOYSA-N
Safety Informationpictograms GHS09 signalword Warning hcodes H400 pcodes P273 Personal Protective Equipment Eyeshields,, Gloves, RIDADR UN 3077 9 / PGIII WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PffBT4T-2OD 900720-100MG
Linear Formula: (C62H88F2N2S5)n CAS Number: 1644164-62-4 ApplicationRequires hot ink processing (i.e. coating with ink at temperature 100-110 °C to ensure good coatability).Packaging100 mg in glass bottleПараметрыQuality Level 100, description Band gap: 1.65 eV form powder mol wt Mw 100,000-150,000 by GPC solubility chlorinated solvents: soluble (at elevated temperature
solubility limit: <17 mg/ml in chlorobenzene + dichlorobenzene), chlorobenzene: soluble, dichlorobenzene: solublemax 400-750 nm Orbital energy HOMO -5.34 eV , LUMO -3.69 eV A
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PffBT4T-C9C13 900980-100MG
Linear Formula: (C66H96F2N2S5)n CAS Number: 2001095-79-8 NACRES: NA.23 Other NotesSpecial note: Requires hot ink processing (i.e. coating with ink at temperature 80-100 °C) to ensure good coatability.ПараметрыQuality Level 100, description Band gap: 1.65 eV mol wt Mw 35,000-100,000 solubility organic solvents: soluble (O-xylene, 1,2,4-trimethylbenzene, toluene, chlorobenzene, Di-chlorobenzene
solubility limit: <18 mg/ml in O-xylene )max 400-750 nm Orbital energy HOMO -5.34 eV , LUMO -3.69 eV A PDI 3.0 ()
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
PFO-DBT 754013-100MG
Linear Formula: (C43H46N2S3)n CAS Number: 782469-77-6 NACRES: NA.23 Параметрыdescription Band gap: 1.87 eV Quality Level 100, mol wt average Mw 10,000-50,000 loss 0.5 wt. % TGA, 400 °C transition temp Tm >400 °C Orbital energy HOMO -5.4 eV , LUMO -3.53 (CV) OPV Device Performance ITO/PEDOT:PSS/PFO-DPT:PC61BM (1:2)/Ba/Al - Short-circuit current density (Jsc): 5.18 mA/cm2
- Open-circuit voltage (Voc): 0.95 V
- Fill Factor (FF): 0.35
- Power Conversion Efficiency (PCE): 2.24 %
semiconductor properties P-type (mobility=3x104 cm2/V·s)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Platinum paste, screen printable 791512-20G
MDL number: MFCD00011179 PubChem Substance ID: 329768276 NACRES: NA.23 ApplicationPT1 Platinum Paste can be used in applications that require a highly transparent layer with high electrocatalytic activity.
PT1 Platinum Paste is oil-based and formulated to be applied using a screen printer; providing films with excellent uniformity; performance and reproducibility; and can be used for DSSC polot production.
After drying; this paste must be fired at or above 420°C. This results in uniformly distributed platinum nanoclusters; providing good transparency and high catalytic activity for the electrochemical reduction of I3- to I-.
Suggested Mesh Screen: 100TPackaging20 g in glass bottleLegal InformationProduct of Dyesol® exclusive supplier of Sun2 products under license from EPFL
Dyesol® is a registered trademark of Dyesol Ltd.ПараметрыQuality Level 100 form paste (Amber) viscosity 2500-4500 mPa.s (Analysis carried out at 20°C with 20mm 4 degree cone/plate; 40 s-1) storage temp. 2-8°C InChI 1S/Pt InChI key BASFCYQUMIYNBI-UHFFFAOYSA-N
Safety Informationpictograms GHS05,GHS07,GHS08 signalword Danger hcodes H315 - H317 - H318 - H334 - H335 pcodes P261 - P280 - P305 + P351 + P338 - P342 + P311 Target Organs Respiratory system RIDADR NA 1993 / PGIII WGK Germany WGK 1 Flash Point F 194.0 °F Flash Point C 90 °C Узнать цену -
Poly(1,4-phenylene sulfide)
Linear Formula: (-C6H4-4-S-)n CAS Number: 25212-74-2 MDL number: MFCD00084445 PubChem Substance ID: 24850993
Кат. номер 182354-5G 182354-100G 182354-250G General descriptionPoly(1,4-phenylene sulfide)(PPS) is an aromatic polymer that can be used as a polymer backbone or an engineering plastic. It is also called as poly(phenylene sulfide) which can be sulfonated to form ion-exchange membranes for electrochemical applications. It is industrially produced by polycondensation of p-dichlorobenzene and sodium sulfate in N-methylpyrrolidone as a solvent.ApplicationAuto intake manifolds and pumps, electrical connectors and circuit boards, flame-resistant clothing, valves, coatings, non-stick coatings, power tool parts and heater grills.
PPS can be sulfonated to form a proton exchange membrane with zeolite that can be used as an electrolyte with higher thermal stability which facilitates in the fabrication of solar cells. It can also be used in the formation of organic- inorganic nanocomposite membranes using nanozeolites and carbon nanotubes as nanofillers which can be used as high performance gas separation membranes. PPS may be sulfonated and chloromethylated to form novel PPS fiber with higher dyeing ability in dispersive, anionic and cationic dyes.Packaging5, 100, 250 g in poly bottleFeatures and BenefitsHigh performance, linear thermoplastic. Excellent thermal and chemical resistance, inherent flame resistance and superior electrical insulation properties.Параметрыform powder Quality Level 100, mol wt average Mn ~10,000 mp 285-300 °C transition temp Tg 150 °C density 1.36 g/mL at 25 °C SMILES string Sc1ccc(S)cc1
Safety InformationPersonal Protective Equipment Eyeshields,, Gloves,, type N95 (US), RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3,4-ethylenedioxythiophene) 675288-25ML
Linear Formula: (C6H4O2S)n CAS Number: 126213-51-2 MDL number: MFCD09753886 NACRES: NA.23 General descriptionPoly(3,4-ethylenedioxythiophene)(PEDOT) is a conjugating polymer that has a conductivity of 300 S/cm. It can be copolymerized with poly(styrene-sulfonic acid) to form a water soluble polymeric film with high conductivity and transparency.ApplicationPEDOT doped with graphene oxide (GO) may be coated on carbon electrodes to fabricate electrochemical sensors for nonenzymatic sensing of glucose. It can also be used as a conductive polymer which may act as a bridge between the electronic polymers and biomolecules for a variety of bioelectronics applications.Packaging25 mL in poly bottleПараметрыform dispersion, nanoparticles Quality Level 100, contains dodecylbenzene sulfonic acid (DBSA) as dopant concentration in H2O storage temp. 2-8°C
Safety InformationPersonal Protective Equipment Eyeshields,, Gloves,, multi-purpose combination respirator cartridge (US), RIDADR NONH for all modes of transport WGK Germany WGK 2 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3,4-ethylenedioxythiophene) hydrate 678392-500MG
Linear Formula: (C6H4O2S)n ·xH2O NACRES: NA.23 General descriptionPEDOT is a conjugated, electronically and ionically active polymer. Conjugated polymers offer charge transport between inorganic, electrically conducting metals and organic, proton-conducting biological systems. PEDOT is chemically stable on account of the diethoxy substituents that replace the defect causing extra hydrogen atoms.The electron donating nature of the pendant PEDOT oxygen atoms also improves the conductivity of the molecule.ApplicationConjugated polymers such as PEDOT can be potentially useful for wide variety of bionic devices including cochlear, retinal, and cortical implants, as well as pacemakers and glucose sensors.Packaging500 mg in glass bottleПараметрыform nanotubes L × I.D. × O.D. ~11.49 μm x 272.4 nm x 416 nm, TEM
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3,4-ethylenedioxythiophene), bis-poly(ethyleneglycol), lauryl terminated 736287-25G
NACRES: NA.23 General descriptionAedotron™ polymers are solvent-dispersable forms of PEDOT. These are copolymers of doped PEDOT and a flexible, soluble polymer such as poly(ethylene glycol) (PEG). These colloidal dispersions are stabilized by the highly solvated PEG chains which sterically limit the aggregation of the PEDOT blocks. Aedotron polymers are neither acidic nor corrosive, it easily disperses in polar aprotic solvents.
High transparency and high conductivity dispersion in a non-volatile solventApplicationA single-pass line has the following characteristics:- Printed line width, 120 µm
- Printed line cross-sectional area, 14.1µm2
- Printed line average height, 70.6 m
- Sheet resistance, 2.0 kOhms/Square
- Resistivity, 14,021 µOhms·cm (71 S/cm)
- Fairly good optical clarity
Conducting polymer dispersion suitable for making conducting films, anti-static layers and transparent electrodes for electroluminescent lamps. 1,2 Dichlorobenzene can be used to cast robust films on many polymeric substrates, but should be tested in each case.Packaging25 g in glass bottleFeatures and BenefitsThe block copolymer structure renders the conducting polymer PEDOT highly dispersible in organic solvents. dichlorobenzene is compatible with many coatings and polymers formulations.CautionStore this product at room temperature (do not refrigerate or freeze). Some settling and aggregation will normally occur. Agitate, sonicate, and filter prior to use. A plug of glass wool in a pipette can be used for easy filtration. The shelf life of this product will vary depending on how it is stored and handled. Product should be discarded if heavy aggregation occurs, or if sonication / filtering are inadequate to produce a good casting solution.Other NotesNot for spin-castLegal InformationAedotron is a trademark of TDA Research, Inc.
Aedotron is a trademark of TDA Research, Inc.Параметрыform liquid (dispersion) Quality Level 100, contains perchlorate as dopant composition acetonitrile, 4-8 wt. % , Aedotron™ TM-C3 polymer, 0.2-0.9 wt. % , propietary processing additive, 0.1-0.7 wt. % , propylene carbonate, 90-95 wt. % , propylene glycol, 0.0-0.3 wt. % concentration 0.6-1.1 wt. %, 0.8 wt. % (dispersion in propylene carbonate) refractive index n20/D 1.411 particle size 200-600 nm (in suspension) conductivity 10-45 S/cm (bulk) density 1.141 g/mL at 25 °C
Safety Informationpictograms GHS02,GHS07 signalword Warning hcodes H226 - H319 pcodes P210 - P233 - P240 - P241 - P242 - P305 + P351 + P338 RIDADR UN 1993C 3 / PGIII WGK Germany WGK 2 Flash Point F 100.0 °F Flash Point C 37.8 °C Узнать цену -
Poly(3,4-ethylenedioxythiophene), tetramethacrylate end-capped solution 649813-25G
EC Number: 203-572-1 MDL number: MFCD06798809 NACRES: NA.23 General descriptionPlease follow this link for Aedotron/Oligotron selection guide table,.
The main characteristic of Oligotron™ PC is that it behaves as a reactive oligomer in non-volatile solvent. Used blended with monomers, or for reactions with functional compounds.
Poly(3,4-ethylenedioxythiophene), tetramethacrylate end-capped solution (PEDOT-Meth) is a semiconductor based polymer that is functionalized with tetramethacrylate that facilitates effective crosslinking of the conjugated films.ApplicationFor best results, agitate for 20 minutes prior to use. Films cast from propylene carbonate will require heat to dry. Photocurable inks can be formulated by adding acrylate monomers and photoinitiators (i.e. DMPA). Propylene carbonate will remain in the polymer. Functional compounds can be coupled to the oligomer via reactions at the methacrylate group.
PEDOT-Meth can be used as a plasticizing membrane in the fabrication of ion-selective sensors and light emitting diodes.
Product can be blended with additional acrylate or methacrylate monomers and crosslinked to make polymer blends. Custom molecules can be synthesized by bonding functional compounds, via the methacrylate groups, to the conducting EDOT oligomers.Packaging25 g in poly bottleFeatures and BenefitsEnd-capped structure renders the conducting oligomer PEDOT dispersible. The methacrylate groups offer the potential for crosslinking, or addtional chemical functionalization. Completely dried Oligotron(TM) tetramethacrylate via the methacrylate functional groups.CautionStore this product at room temperature (do not refrigerate or freeze). Some settling will normally occur. Agitate, sonicate, and filter prior to use. A plug of glass wool in a pipette can be used for easy filtration. The shelf life of this product will vary depending on how it is stored and handled. Product should be discarded if heavy aggregation occurs, or if sonication / filtering are inadequate to produce a good casting solution.Legal InformationOligotron is a trademark of TDA Research, Inc.Параметрыmol wt ~1,360-1,600 g/mol (methacrylate equivalent weight), average Mn ~6,000(lit.) Quality Level 100, contains p-toluenesulfonate as dopant composition Oligotron™ tetramethacrylate, 0.5 wt. % , propylene carbonate, 99.5 wt. % concentration 0.5 wt. % (dispersion in propylene carbonate) resistance 1-10 M /sq (typical surface resistance of film) conductivity 0.1-0.5 S/cm (bulk) density 1.189 g/mL at 25 °C
Safety Informationpictograms GHS07 signalword Warning hcodes H319 pcodes P305 + P351 + P338 RIDADR NONH for all modes of transport WGK Germany WGK 2 Flash Point F 269.6 °F - closed cup Flash Point C 132 °C - closed cup Узнать цену -
Poly(3,4-ethylenedioxythiophene)-block-poly(ethylene glycol) solution 649805-25G
MDL number: MFCD06798808 NACRES: NA.23 General descriptionPlease follow this link for Aedotron/Oligotron selection guide table,.
Aedotron™ polymers are solvent-dispersable forms of PEDOT. These are copolymers of doped PEDOT and a flexible, soluble polymer such as poly(ethylene glycol) (PEG). These colloidal dispersions are stabilized by the highly solvated PEG chains which sterically limit the aggregation of the PEDOT blocks. Aedotron polymers are neither acidic nor corrosive, it easily disperses in polar aprotic solvents. Perchlorate-doped copolymers typically have a higher conductivity with thin films that are more transparent.ApplicationNitromethane dispersions can be used to cast thin films on glass, ITO, silicon wafers and many polymeric substrates. Compatibility of the polymeric substrate with nitromethane should be tested in each case. Coat the substrate with a "pool" of the nitromethane dispersion. Thin transparent films are typically spun at 1000 RPM or higher speeds, but more conducting films can be obtained at lower speeds. A single layer spun at 1000 RPM is typically 75 nm thick.
Conducting polymer. Useful as anti-static layers, hole-transport layers in OLED′s and various organic electronics applications (flexible circuits, capacitors, batteries).Packaging25 g in glass bottleCautionStore this product at room temperature (do not refrigerate or freeze). Some settling will normally occur. Agitate, sonicate, and filter prior to use. A plug of glass wool in a pipette can be used for easy filtration. The shelf life of this product will vary depending on how it is stored and handled. Product should be discarded if heavy aggregation occurs, or if sonication / filtering are inadequate to produce a good casting solution.Legal InformationAedotron is a trademark of TDA Research, Inc.Параметрыcontains perchlorate as dopant Quality Level 100, concentration 1 wt % dispersion in nitromethane resistance 10,000-100,000 /sq (spin cast thin films: typically 1-3 layers spun at 1,000 rpm) work function 4.33 eV description 40 nm (RMS roughness spin cast thin films) particle size 600-1000 nm (in suspension) conductivity 0.1-5.0 S/cm (bulk) density 1.127 g/mL at 25 °C
Safety Informationpictograms GHS02,GHS07,GHS08 signalword Warning hcodes H226 - H302 + H332 - H351 - H361fd pcodes P201 - P202 - P210 - P301 + P312 - P304 + P340 + P312 - P308 + P313 RIDADR UN1261 - class 3 - PG 2 - Nitromethane, solution WGK Germany WGK 2 Flash Point F 96.8 °F - closed cup Flash Point C 36 °C - closed cup Узнать цену -
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate)
MDL number: MFCD07371079 NACRES: NA.23
Кат. номер 655201-5G 655201-25G General descriptionPoly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is an organic semiconductor prepared by doping cationic poly(3,4-ethylenedioxythiophene) and poly(4-styrenesulfonate) anion. Its high electrical conductivity and good oxidation resistance make it suitable for electromagnetic shielding and noise suppression. PEDOT:PSS based polymeric films have a high transparency throughout the visible light spectrum and even in near IR and near UV regions, with virtually 100% absorption from 900-2000 nm. PEDOT provides the conduction properties and PSS forms a hydrated colloidal solution.ApplicationReady-to-use high conductivity coating formulation.
PEDOT:PSS is an intrinsically conductive polymer (ICP) that can be coated on various substrates and nanostructures like fullerenes (C60) to form composites with high electrochemical properties for applications like low-cost printed electronics, optoelectronics, and polymeric solar cells. It can be used as a conductive hydrogel with polyethylene glycol-diacrylate (PEG-DA) for potential applications in tissue engineering. PEDOT:PSS also finds use in other organic electronic applications like organic thin film transistors (OTFTs) and dye sensitized solar cells (DSSCs).
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.Packaging5, 25 g in poly bottle
Packaged in poly bottlesПараметрыQuality Level 100 grade high-conductivity grade concentration 3.0-4.0% in H2O resistance 1500 /sq, 4 point probe measurement of dried coating based on initial 6µm wet thickness., 500 /sq, 4 point probe measurement of dried coating based on initial 18µm wet thickness. pH 1.5-2.5 (25 °C, dried coatings) conductivity >200 S/cm viscosity 10-30 cP(20 °C) density 1.011 g/cm3 (dried coatings) storage temp. 2-8°C
Safety Informationpictograms GHS05 signalword Danger hcodes H314 pcodes P280 - P303 + P361 + P353 - P304 + P340 + P310 - P305 + P351 + P338 - P363 - P405 Personal Protective Equipment Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter RIDADR UN 3265 8 / PGIII WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) 483095-250G
MDL number: MFCD07371079 NACRES: NA.23 General descriptionA conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend. Impact of small electric and magnetic fields on the polymer was studied.ApplicationPEDOT:PSS polymeric films have been used as a charge dissipation layer in electron-beam lithography and focused ion beam milling. Sample preparation has been reported to be easier and quicker for various substrates, including gallium nitride (GaN) on sapphire (Al2O3) substrates, zinc oxide (ZnO), fused silica, lithium niobate (LiNbO3), silicon carbide (SiC) and diamond (C), spin-coated onto the ITO coated glass substrate. PEDOT: PSS layers have also been reported to be used as anode buffer layer for organic solar cells and as replacements for the transparent conductive coatings of organic solar cells. Various studies report the use of metal modified conductive grade PEDOT: PSS as an anode buffer layer in solar cells, example: copper phthalocyanine/fullerene-based solar cells 4 Conductive PEDOT:PSS combined with polyvinylidene fluoride (PVDF) membranes may be used to prepare PEDOT:PSS-PVDF ionic liquid soft actuators. The function of PEDOT:PSS as a pseudocapacitive material was investigated.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.Packaging250 g in poly bottle
Packaged in glass bottlesFeatures and BenefitsAntistat coating for plastic and glass.Параметрыgrade conductive grade composition PEDOT content, 0.5 wt. % , PSS content, 0.8 wt. % concentration 1.3 wt % dispersion in H2O band gap 1.6 eV conductivity 1 S/cm storage temp. 2-8°C
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 pcodes P264 - P280 - P302 + P352 - P305 + P351 + P338 - P332 + P313 - P337 + P313 Personal Protective Equipment Faceshields, Gloves, Goggles, type ABEK (EN14387) respirator filter RIDADR NONH for all modes of transport WGK Germany WGK 2 Flash Point F No data available Flash Point C No data available Узнать цену -
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) 739324-100G
MDL number: MFCD07371079 General descriptionPoly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. PEDOT:PSS is majorly used in organic electronics due to the properties such as:- low band gap
- good optical properties
- high conductivity
- low redox potential
- easy processing
- tunable film forming ability
Aqueous surfactant-free dispersion of PEDOT:PSS neutralized to pH >5. Suitable for preparation of pH-neutral transparent conductive films printed electronics applications (e.g. hole injection layers). A conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.ApplicationPEDOT:PSS can be used as an electrode material that forms a layered structure with a high mobility for charge carriers. It can be used for a wide range of energy based applications, such as organic photovoltaics (OPVs), dye sensitized solar cells (DSSCs), organic light emitting diodes (OLEDs) and supercapacitors.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.Packaging100 g in poly bottleLegal InformationProduct of Agfa
Orgacon is a trademark of Agfa-Gevaert N.V.ПараметрыQuality Level 100 grade high-conductivity grade concentration 1.1% in H2O resistance <100 /sq, >70% visible light transmission (40 µm wet) refractive index n20/D 1.335 pH 5-7 viscosity <100 cP(22 °C) density 0.982 g/mL at 25 °C storage temp. 2-8°C
Safety Informationpictograms GHS05,GHS08 signalword Danger hcodes H315 - H318 - H360D pcodes P202 - P264 - P280 - P302 + P352 - P305 + P351 + P338 - P308 + P313 RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) 739332-100G
MDL number: MFCD07371079 NACRES: NA.23 General descriptionPoly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer without a high boiling solvent (HBS), that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. It has the following properties that make it a viable polymer in organic electronics.
Aqueous surfactant-free dispersion of high conductivity grade PEDOT:PSS polymer. Optimal performance in transparent conductive coatings may require addition of formulation ingredients (e.g. surfactants and high-boiling solvents).Conducting polymer such as poly(3,4-ethylenedioxythiophene) doped with poly(styrene sulfonate) anions (PEDOT/PSS) is widely used in various organic optoelectronic devices. PEDOT: PSS is a blend of cationic polythiopene derivative, doped with a polyanion. High electrical conductivity and good oxidation resistance of such polymers make it suitable for electromagnetic shielding and noise suppression. Thus, the polymer film was found to possess high transparency throughout the visible light spectrum and even into near IR and near UV regions, virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Impact of small electric and magnetic fields on the polymer was studied.ApplicationPEDOT:PSS can be used as an electrode material with high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic photovoltaics (OPV), perovskite solar cells (DSSCs), organic light emitting diodes (OLEDs) and other biomedical sensors.
Used to prepare highly transparent conductive coating formulations. Primary and secondary nucleation by introducing PEDOT:PSS in a hydrogel was studied.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.Packaging100 g in glass bottleLegal InformationProduct of Agfa-Gevaert N.V.
Orgacon is a trademark of Agfa-Gevaert N.V.ПараметрыQuality Level 100 grade high-conductivity grade concentration 1.1% in H2O resistance <100 /sq, <80% visible light transmission (40µm wet) refractive index n20/D 1.334 pH <2.5 viscosity 30-100 cP(20 °C) density 0.999 g/mL at 25 °C storage temp. 2-8°C
Safety Informationpictograms GHS05 signalword Danger hcodes H314 pcodes P280 - P303 + P361 + P353 - P304 + P340 + P310 - P305 + P351 + P338 - P363 - P405 RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) 900181-100G
General descriptionPoly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) is a conductive polymer that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate) (PSS). PEDOT is doped with positive ions and PSS with negative ions. It is mainly used in organic electronics due to the properties, which include- low band gap
- good optical properties
- high conductivity
- low redox potential
- easy processing
- tunable film forming ability
High-conductivity grade.ApplicationPEDOT:PSS can be used as an electrode material with high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic photovoltaics (OPV), dye sensitized solar cells (DSSCs), organic light emitting diodes (OLEDs), supercapacitors and biomedical sensors.
Orgacon™ S315 is ready-to-use and made with conductive polymer PEDOT:PSS. Typical application processes are slot die, Meyer bar and gravure coating. It is particularly designed for optimal properties on PET and meet the requirements of several transparent electrodes applications as alternative to ITO.- ITO substitution coating.
- ITO-free OPV.
- Surface electrical resistance (SER) at 90% VLT* (visual light transmission): 125 /square.
- Stability ratio R/R_0 (500 hr at 60 °C, 95% RH) : 1.3.
Packaging100 g in Sure/Seal™Preparation Note- Dilute with DI water or compatible solvent if needed.
- Pre-treated substrate with corona- or plasma treatment increase adhesion.
Other Notes- These additives have low water content (less than 100 ppm).
- Please handle under inert and moisture free environment (glove box).
- Keep containers tightly closed.
- Keep away from heat and ignition sources.
- Store in a cool and dry place.
- Avoid storing together with oxidizers.
Legal InformationOrgacon is a trademark of Agfa-Gevaert N.V.Параметрыgrade high-conductivity grade Quality Level 100, description Visual Light Transmission (VLT): ≥ 80% form dispersion concentration 0.5-1 wt. % (PEDOT: PSS in water) sheet resistance <200 Ω/sq (coating : 40μ wet, drying: 6 min 130°C) pH range 2 - 3.5 viscosity ≤70 mPa.s(20 °C) storage temp. 2-8°C SMILES string CC1=C2OCCOC2=C(C)S1.CCC(C3=CC=CC=C3)C.C[SO3-]
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 pcodes P264 - P280 - P302 + P352 - P332 + P313 - P337 + P313 - P362 + P364 RIDADR NONH for all modes of transport WGK Germany WGK 2 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) 900208-1G
MDL number: MFCD07371079 General descriptionPoly(3,4-ethylenedioxythiophene)-poly(styrenesulfonate) (PEDOT:PSS) (dry re-dispersible pellets) is a conductive polymer that is formed by electropolymerizing 3,4-ethylenedioxythiophene in a solution of poly(styrenesulfonate)(PSS). PEDOT is doped with positive ions and PSS with negative ions. It has the following properties that make it viable polymer in organic electronics:- low band gap
- good optical properties
- high conductivity
- low redox potential
- easy processing
- tunable film forming ability
ApplicationOrgacon™ DRY5 pellets can be re-dispersed in organic solvents such as ethanol. The resulting dispersion can be used in coating or ink formulations targeted for different applications requiring high conductivity.
PEDOT:PSS can be used as an electrode material with high mobility for charge carriers. It can be used for a wide range of energy based applications such as organic photovoltaics (OPV), dye sensitized solar cells (DSSCs), organic light emitting diodes (OLEDs), supercapacitors and other biomedical based sensors.
Virtually 100% absorption from 900-2,000 nm. No absorption maximum from 400-800 nm. Conductive polymer blend.Packaging1 g in poly bottleLegal InformationOrgacon is a trademark of Agfa-Gevaert N.V.ПараметрыQuality Level 100, form pellets sheet resistance <200 Ω/sq (by addition of 5% diethylene glycol) storage temp. 2-8°C
Safety Informationpictograms GHS05 signalword Danger hcodes H314 pcodes P260 - P280 - P303 + P361 + P353 - P304 + P340 + P310 - P305 + P351 + P338 RIDADR UN 1759 8 / PGII WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3-dodecylthiophene-2,5-diyl) 682780-250MG
CAS Number: 137191-59-4 MDL number: MFCD00677714 NACRES: NA.23 General descriptionPoly(3-dodecylthiophene-2,5-diyl) (P3DDT) is a poly(3-alkylthiophene) based conducting polymer that shows reversible electrochemistry with high conductivity. It is a regioregular polymer that can be used in the development of a variety of organic electronics based devices.ApplicationP3DDT can be used as a conjugating polymer in the fabrication of electrochemical devices which include polymeric solar cells, chemical sensors and field effect transistors.
Conducting polymer.
Rechargeable battery electrodes, electrochromic devices, chemical and optical sensors, light-emitting diodes, microelectrical amplifiers, field-effect transistors and non-linear optical materials.Packaging250 mg in glass insertПараметрыgrade electronic grade description Band gap: 1.74 eV, regioregular assay 99.995% trace metals basis form solid mol wt average Mw ~27,000 transition temp Tm (DSC) 165.6 °C (peak) Orbital energy HOMO -5.29 eV , LUMO -3.55 eV A OPV Device Performance ITO/PEDOT:PSS/P3DDT/PC61BM (1:3)/LiF/Al - Short-circuit current density (Jsc): 2.9 mA/cm2
- Open-circuit voltage (Voc): 0.6 V
- Fill Factor (FF): 0.38
- Power Conversion Efficiency (PCE): 0.65 %
semiconductor properties P-type (mobility=104 - 101 cm2/V·s)
Safety InformationPersonal Protective Equipment Eyeshields,, Gloves,, type N95 (US), RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3-dodecylthiophene-2,5-diyl) 450650-1G
CAS Number: 137191-59-4 MDL number: MFCD00677714 NACRES: NA.23 General descriptionConducting Polymer. Greater than 98.5% head-to-tail regiospecific conformation.
Forms a shiny red-purple film.ApplicationRechargeable battery electrodes, electrochromic devices, chemical and optical sensors, light-emitting diodes, microelectrical amplifiers, field-effect transistors and non-linear optical materials.
Conducting polymer.
Rechargeable battery electrodes, electrochromic devices, chemical and optical sensors, light-emitting diodes, microelectrical amplifiers, field-effect transistors and non-linear optical materials.Packaging1 g in glass bottleLegal InformationProduct of Rieke® Metals, Inc. ®Reg. trademark of Rieke Metals, Inc.ПараметрыQuality Level 100, mol wt average Mw ~60,000 solubility chloroform: soluble fluorescence ex 442 nm; em 568 nm in chloroform OPV Device Performance ITO/PEDOT:PSS/P3DDT/PC61BM (1:3)/LiF/Al - Short-circuit current density (Jsc): 2.9 mA/cm2
- Open-circuit voltage (Voc): 0.6 V
- Fill Factor (FF): 0.38
- Power Conversion Efficiency (PCE): 0.65 %
semiconductor properties P-type (mobility=1E-4-1E-1 cm2/V·s)
Safety InformationPersonal Protective Equipment Eyeshields,, Gloves,, type N95 (US), RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3-hexylthiophene-2,5-diyl) 445703-1G
Linear Formula: (C10H14S)n CAS Number: 156074-98-5 MDL number: MFCD00217686 NACRES: NA.23 General descriptionPoly(3-hexylthiophene-2,5-diyl) (P3HT) is a poly(alkylthiophene) based semiconducting polymer that is hydrophobic at neutral state and has - conjugation in its backbone. It has a hole mobility is in the range of 10-3-10-1 cm2V-1s-1 and is commonly used in the development of field-effect transistors (FETs) for a wide range of applications.
Poly(3-hexylthiophene) (P3HT) is a regioregular semiconducting polymer. It is used in organic electronics primarily because of its regular end-to-end arrangement of side chain, which allows efficient p- p stacking of the conjugated backbones. On account of the alkyl side group, P3HT is rendered hydrophobic in neutral state. Solution-to-solid phase transformation and thin film formation of poly(3-hexylthiophene) (P3HT) was reported in a study.ApplicationRechargeable battery electrodes, electrochromic devices, chemical and optical sensors, light-emitting diodes, microelectrical amplifiers, field-effect transistors and non-linear optical materials.
For the characterization and solid-state properties of this polymer, see J. Am. Chem. Soc. .
P3HT, an electron donor that acts as a semiconducting active layer in combination with an electron acceptor like fullerene derivative (6,6)-phenyl C61-butyric acid methylester (PCBM), can be used to fabricate bulk heterojunction (HJT) based organic solar cells (OSCs). Volatile organic compounds (VOCs)and electric sensor devices can be developed by using Langmuir-Schaefer (LS) films of P3HT and poly(3-octylthiophene)(P3OT). It can also be used with polystyrene to process a nano-scaled polymeric coating through spray coating onto carbon nanotube (CNT) powders.
Poly(3-hexylthiophene-2,5-diyl) may be used to fabricate ZnO nanowire arrays based photodiode. Regio- regular poly(3-hexylthiophene-2,5-diyl) may find extensive use as a semiconducting layer in organic thin film field effect transistor (FETs).Packaging1 g in glass bottle
Packaged in glass bottlesFeatures and BenefitsGreater than 90% head-to-tail regiospecific conformation.
Good processibility, environmental stability and electroactivity.Legal InformationProduct of Rieke Metals, Inc.
Rieke is a registered trademark of Rieke Metals, Inc.ПараметрыQuality Level 100 mol wt average Mw 50,000-100,000 conductivity ~103 S/cm (when doped with iodine) mp 238 °C, 238 °C fluorescence ex 443 nm; em 568 nm in chloroform Orbital energy HOMO 5 eV , LUMO 3 eV A OPV Device Performance ITO/NiO/P3HT/PC61BM/LiF/Al - Short-circuit current density (Jsc): 11.3 mA/cm2
- Open-circuit voltage (Voc): 0.64 V
- Fill Factor (FF): 0.69
- Power Conversion Efficiency (PCE): 5.16 %
- Short-circuit current density (Jsc): 9.5 mA/cm2
- Open-circuit voltage (Voc): 0.63 V
- Fill Factor (FF): 0.68
- Power Conversion Efficiency (PCE): 5 %
semiconductor properties P-type (mobility=1E-4-1E-1 cm2/V·s)
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system Personal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3-hexylthiophene-2,5-diyl) 510823-1G
Linear Formula: (C10H14S)n CAS Number: 156074-98-5 MDL number: MFCD00217686 NACRES: NA.23 General descriptionPoly(3-hexylthiophene-2,5-diyl) (P3HT) is a poly(alkylthiophene) based semiconducting polymer that is hydrophobic at the neutral state and has - conjugation as a backbone. Its hole mobility is in the range of 10-3-10-1cm2V-1s-1 and it can be mainly used in the development of organic electronic based devices.
1:1 (head-to-head):(head-to-tail) linkages of regioisomersApplicationThis material has solid state properties.
P3HT is a conducting polymer that can be used in the fabrication of a variety of devices which include solar cells, field effect transistors (FETs), light emitting diodes (LEDs) and photovoltaic cells.Packaging1 g in glass bottle
Packaged in glass bottlesLegal InformationProduct of Rieke Metals, Inc.
Rieke is a registered trademark of Rieke Metals, Inc.ПараметрыQuality Level 100, color red mp 238 °C solubility chloroform, methylene chloride, toluene, and THF: soluble fluorescence ex 420 nm; em 551 nm in chloroform OPV Device Performance ITO/NiO/P3HT/PC61BM/LiF/Al - Short-circuit current density (Jsc): 11.3 mA/cm2
- Open-circuit voltage (Voc): 0.64 V
- Fill Factor (FF): 0.69
- Power Conversion Efficiency (PCE): 5.16 %
- Short-circuit current density (Jsc): 9.5 mA/cm2
- Open-circuit voltage (Voc): 0.63 V
- Fill Factor (FF): 0.68
- Power Conversion Efficiency (PCE): 5 %
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system Personal Protective Equipment dust mask type N95 (US),, Eyeshields,, Gloves, RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3-hexylthiophene-2,5-diyl) 900549-1G
Linear Formula: (C10H14S)n CAS Number: 104934-50-1 NACRES: NA.23 Параметрыdescription Metal purity: Mg: 100 ppm
Ni: 100 ppm, Regioregularity: 90%Quality Level 100, form solid mol wt average Mw 85,000-100,000
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3-octylthiophene-2,5-diyl) 445711-1G
Linear Formula: (C12H18S)n CAS Number: 104934-51-2 MDL number: MFCD00241412 General descriptionGreater than 98.5% head-to-tail regiospecific conformation.
Poly(3-octylthiophene-2,5-diyl) (P3OT) is an alkylthiophene based conductive polymer with high electroluminescence, which is soluble in most of the organic solvents. It can be prepared by the electrochemical polymerization of 3-octylthiophene (3OT). It is hydrophobic and can be used as a transducer for ion selective electrodes.ApplicationP3OT forms a nanocomposite with carbon nanotubes (CNTs) for devising a high performance semiconducting material. It can also be used as a π-conjugating polymer for the fabrication of organic electronic based devices which include polymeric diodes, solar cells and photovoltaic modules.
Rechargeable battery electrodes, electrochromic devices, chemical and optical sensors, light-emitting diodes, microelectrical amplifiers, field-effect transistors and non-linear optical materials.
Rechargeable battery electrodes, electrochromic devices, chemical and optical sensors, light-emitting diodes, microelectrical amplifiers, field-effect transistors and non-linear optical materials. Poly (3-octylthiophene-2,5-diyl) (P3OT)-single walled carbon nanotubes composites were prepared., 3 Doped P3OT may be used in NO2 sensing applications. 2
For the characterization and solid-state properties of this polymer, see J. Am. Chem. Soc. .
Used in organic field-effect transistors and in polymer-based solar cells.
Conducting polymer.
Rechargeable battery electrodes, electrochromic devices, chemical and optical sensors, light-emitting diodes, microelectrical amplifiers, field-effect transistors and non-linear optical materials.Packaging1 g in glass bottle
Packaged in glass bottlesFeatures and BenefitsGood processability, environmental stability and electroactivity.Legal InformationProduct of Rieke Metals, Inc.
Rieke is a registered trademark of Rieke Metals, Inc.ПараметрыQuality Level 100, mol wt average Mn ~34,000 color black conductivity 1 x 10-6 S/cm, ~1 x 103 S/cm (when doped with iodine) mp 190 °C, 198-211 °C fluorescence ex 442 nm; em 562 nm in chloroform OPV Device Performance ITO/PEDOT:PSS/P3OT:PC61BM (1:2)/LiF/Al - Short-circuit current density (Jsc): 5.55 mA/cm2
- Open-circuit voltage (Voc): 0.5 V
- Fill Factor (FF): 0.33
- Power Conversion Efficiency (PCE): 0.91 %
semiconductor properties P-type (mobility=1E-4-1E-1)
Safety InformationPersonal Protective Equipment Eyeshields,, Gloves,, type N95 (US), RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(3-octylthiophene-2,5-diyl-co-3-decyloxythiophene-2,5-diyl) 696897-250MG
Linear Formula: (C12H18S)m(C14H22OS)n NACRES: NA.23 General descriptionPoly(3-octylthiophene-2,5-diyl-co-3-decyloxythiophene-2,5-diyl) (POT-co-DOT) is a regioregular conducting copolymer, which can be used as a donor material in electrochemical devices. It has a small band gap and forms an absorption spectrum in the red and infrared regions.
Typical Octyl thiophene:Decyloxythiophene = 1:1 (molar ratio). Synthesis, electrochemical and photophysical properties of poly(3-octylthiophene-2,5-diyl-co-3-decyloxythiophene-2,5-diyl)s (POT-co-DOT) copolymer via condensation polymerization has been reported. Application of POT-Co-DOT to electrophoretic deposition has been reported in a separate study.ApplicationPOT-co-DOT can be used as a conjugating polymer for the fabrication of polymeric solar cells (PSCs) and bulk heterojunction based solar cells with power conversion efficiency (PCE).
Conducting polymerPackaging250 mg in glass insertПараметрыform powder mol wt Mn 8,000, Mw 21,000 fluorescence ex 490 nm; em 600 nm Mw/Mn 2.5
Safety InformationPersonal Protective Equipment Eyeshields,, Gloves,, type N95 (US), RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Poly(4-vinylphenol)
Linear Formula: [CH2CH(C6H4OH)]n CAS Number: 24979-70-2 MDL number: MFCD00147948 PubChem Substance ID: 24867290 NACRES: NA.23
Кат. номер 436224-5G 436224-25G General descriptionPoly(4-vinylphenol) (PVP) is a polymeric cross-linker mainly used as a layer to improve adhesion by forming a non-toxic and low cost film. It is an acidic polymer which consists of more than 100 hydroxyl groups in one molecule of PVP which result in high stability and complexation of the films.ApplicationCross-linked PVP can be used as a dielectric material to fabricate a low voltage single walled carbon nanotube (SWCNT) based thin film transistors. Organic semiconducting thin film transistor utilizes PVP as a barrier layer with photo-resistive properties which can be coated with a variety of charge carrying nanoparticles like silver nanoparticles (AgNPs), titanium oxide(TiO2) and graphene oxide(GO).
Substitute for Novolac resins in photoresists, adhesion promoter and improves heat resistance in hot melt adhesives and surface treatment in metal finishing. Derivatives used as antioxidants and flame retardants in plastics. Component of polymer blends to modify surface characteristics and improve impact resistance.Packaging5, 25 g in poly bottleПараметрыQuality Level 100 mol wt average Mw ~25,000 intrinsic viscosity (=0.50, k=9.71 x 10-4) mp 360 °C (dec.) transition temp Tg 130-185 °C solubility alcohols, ethers, ketones and esters: soluble, aromatics, petroleum ethers and chlorinated hydrocarbons: insoluble density 1.16 g/mL at 25 °C (lit.) SMILES string Oc1ccc(C=C)cc1 InChI 1S/C8H10O/c1-2-7-3-5-8(9)6-4-7/h3-6,9H,2H2,1H3 InChI key HXDOZKJGKXYMEW-UHFFFAOYSA-N
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Polyaniline (emeraldine base)
CAS Number: 25233-30-1 MDL number: MFCD00241446 NACRES: NA.23
Кат. номер 576379-5G 576379-25G General descriptionPolyaniline (PAni) emeraldine salt can be prepared by protonation of PAni emeraldine base (PAni-EB). PAni-EB forms at pH>7. Its mechanism against corrosive agents has been explained in a study.
Polyaniline (emeraldine base) (PANI-EB) is an intrinsically conducting polymer (ICP) that can be formed by oxidative polymerization of aniline. Emeraldine base contains oxidized diimine and reduced diamine. PANI can be modified into the conjugating emeraldine base form by p-type doping with protonic acid.ApplicationPANI-EB can form a nanocomposite with multi-walled carbon nanotubes (MWCNTs) that can be used to functionalize glassy carbon electrodes for the electro-sensitive detection of cadmium (Cd(II)) and lead (Pb(II)). Carbon nanofibers may be reinforced on PANI-EB to yield a specific capacitance of 95 F/g and a 92% retention over 3000 cycles as observed in supercapacitor applications. It may be used with heptamethyleneimine as an inhibitor to form stable fuel cell membranes.Packaging5 g in poly bottleFeatures and BenefitsUndoped form of conducting polymer (non-conductive).ПараметрыQuality Level 100 mol wt average Mw ~100,000 conductivity 1 x 10-9 S/cm (pressed pellet, ASTM F8) solubility m-cresol: soluble, DMAC: soluble, DMF: soluble, DMSO: soluble, NMP: soluble max 324 nm
Safety InformationPersonal Protective Equipment Eyeshields, Gloves, type N95 (US) RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Polyaniline (emeraldine salt)
MDL number: MFCD00284320 NACRES: NA.23
Кат. номер 530565-25G 530565-5G General descriptionInherently conducting polymer based additive. Stable up to at least 300°C in air. Polyaniline is environmentally stable and with tunable conductivity. Synthesis of polyaniline (PANI) emeraldine salt by chemical oxidation has been reported. It was observed that sulfonated dyes chemically interact with the charged backbone of PANI. PANI selectively adsorbs the sulfonated dye. Spectral, diffraction and conductivity measurements of the polymer has been reported in the same study.
Polyaniline (emeraldine salt) (PANI-ES) is a conductive polymer that is loaded with carbon that forms a composite where the nano-carbon is of 100 nm size. It has an emeraldine type oxidation state that exists in the form of its base. It is mainly used in the development of electrochemical devices.ApplicationPANI can be used in the formation of a conjugating system that finds potential applications in semiconductors. It can be used in the fabrication of a variety of devices which include fuel cells, light emitting diodes supercapacitors, chemical sensors(10) and rechargeable batteries.(11)
Conductive additive for thermoplastics and thermosets.Packaging5, 25 g in glass bottle
Packaged in glass bottlesПараметрыQuality Level 100, contains proprietary organic sulfonic acid conductivity 30 S/cm (pressed pellet) mp >300 °C (lit.)
Safety InformationPersonal Protective Equipment Eyeshields,, Gloves,, type N95 (US), RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Polyaniline (emeraldine salt) 577073-10G
MDL number: MFCD00284320 General descriptionPolyaniline (emeraldine salt) (PANI-EB) is a conductive polymer which consists of a ring structure attached with nitrogen substituted derivatives. It forms a blend with nylon as a substrate. The composite has a high dye absorption capacity with good thermo-mechanical properties. It has an emeraldine type oxidation state that exists in the form of its salt.ApplicationPANI-EB finds its usage in a variety of applications which include chemical sensors, absorptive micro-extraction, anticorrosive layer and microelectromechanical systems.
Light colored conductive additive for thermoplastics and thermosets. Polyaniline-based organic and inorganic composites may be fabricated.,5 PANI may be used to prepare sensors for volatile organic compounds.Packaging10 g in poly bottle
Packaged in glass bottlesПараметрыQuality Level 100, form solid conductivity ~0.5 S/cm (pressed pellet) mp >300 °C (lit.) solubility H2O: insoluble, organic solvents: insoluble
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
