Millipore
- Сортировать:
- Вид таблицей
-
Isopore Membrane Filter TMTP04700
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: TMTP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication5.0 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 250 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 50 L/min-cm2-psi air flow rate, ~550 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 47 mm thickness 20 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 5-20 % porosity, 5.0 µm pore size shipped in ambient 590,92 € / 56 152 ₽Получить предложение -
Isopore Membrane Filter HTTP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: HTTPApplication0.4 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 50 mL/min-cm2 water flow rate at 10 psi (typical results), 7 L/min air flow rate at 10 psi, 140 °C max. temp., 18 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi) filter diam. 13 mm thickness 10 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.4 µm pore size, 10-20 % porosity bubble point 1.5 bar (22 psi) at 23 °C shipped in ambient 271,25 € / 25 775 ₽Получить предложение -
Isopore Membrane Filter HTTP02500
eCl@ss: 32031602 NACRES: NB.24 CautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 50 mL/min-cm2 water flow rate at 10 psi (typical results), 7 L/min air flow rate at 10 psi, 140 °C max. temp., 18 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi) filter diam. 25 mm thickness 10 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.4 µm pore size, 10-20 % porosity bubble point 1.5 bar (22 psi) at 23 °C shipped in ambient 414,75 € / 39 411 ₽Получить предложение -
Isopore Membrane Filter TCTP04700
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: TCTP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication10.0 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 69 L/min-cm2-psi air flow rate, ~900 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 47 mm thickness 16 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 10.0 µm pore size, 5-20 % porosity shipped in ambient 820,10 € / 77 929 ₽Получить предложение -
Isopore Membrane Filter ATTP04700
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: ATTP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication0.8 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 125 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 140 °C max. temp., 4.08 L/min-cm2-psi air flow rate, ~85 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 47 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.8 µm pore size, 5-20 % porosity bubble point 1.17 bar, air with water at 23 °C shipped in ambient 508,61 € / 48 330 ₽Получить предложение -
Isopore Membrane Filter GTTP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: GTTP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication0.2 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.007 L/min-cm2-psi air flow rate, 140 °C max. temp., 3.36 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~16 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 13 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.22 µm pore size, 13.8 % porosity bubble point 5.2 bar, air with water at 23 °C shipped in ambient 266,00 € / 25 276 ₽Получить предложение -
Isopore Membrane Filter ATTP01300
eCl@ss: 32031602 NACRES: NB.24 Application0.8 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameterLegal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 125 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 140 °C max. temp., 4.08 L/min-cm2-psi air flow rate, ~85 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 13 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.8 µm pore size, 5-20 % porosity bubble point 1.17 bar, air with water at 23 °C shipped in ambient 227,50 € / 21 618 ₽Получить предложение -
Isopore Membrane Filter HTBP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: HTBPApplication0.4 µm pore size, hydrophilic polycarbonate membrane, 90 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial brown filter, plain filter, polycarbonate membrane sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 18 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~49 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 13 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.4 µm pore size, 5-20 % porosity bubble point 2.9 bar, air with water at 23 °C shipped in ambient 269,50 € / 25 609 ₽Получить предложение -
Isopore Membrane Filter GTBP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: GTBP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial brown filter, plain filter, polycarbonate membrane sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 6 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~16 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 25 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.22 µm pore size, 5-20 % porosity bubble point 5.2 bar, air with water at 23 °C shipped in ambient 609,97 € / 57 962 ₽Получить предложение -
Isopore Membrane Filter RTTP04700
eCl@ss: 32031602 NACRES: NB.24 Application1.2 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.024 L/min-cm2-psi air flow rate, 140 °C max. temp., 687 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~175 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 47 mm thickness 24 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 1.2 µm pore size, 14.7 % porosity bubble point 1.0 bar, air with water at 23 °C shipped in ambient 593,72 € / 56 418 ₽Получить предложение -
Isopore Membrane Filter TETP04700
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: TETPApplication8.0 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 250 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 60 L/min-cm2-psi air flow rate, ~875 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 47 mm thickness 18 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 5-20 % porosity, 8.0 µm pore size shipped in ambient 568,75 € / 54 045 ₽Получить предложение -
Isopore Membrane Filter TETP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: TETPApplication8.0 µm pore size, hydrophilic polycarbonate membrane, 25 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 250 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 60 L/min-cm2-psi air flow rate, ~875 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 25 mm thickness 18 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 5-20 % porosity, 8.0 µm pore size shipped in ambient 388,50 € / 36 917 ₽Получить предложение -
Isopore Membrane Filter RTTP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: RTTPApplication1.2 µm pore size, hydrophilic polycarbonate membrane, 25 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.024 L/min-cm2-psi air flow rate, 140 °C max. temp., 687 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~175 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 25 mm thickness 24 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 1.2 µm pore size, 14.7 % porosity bubble point 1.0 bar, air with water at 23 °C shipped in ambient 406,00 € / 38 580 ₽Получить предложение -
Isopore Membrane Filter VCTP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionThe Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplicationProduct Filters Out: Asbestos Particle Count
0.1 µm pore size, hydrophilic polycarbonate membrane, 25 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationASTM is a registered trademark of American Society for Testing and Materials
ISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter Agency/Method in accordance with ASTM® D5755 sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.000367 L/min-cm2-psi air flow rate, 0.13 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 140 °C max. temp., ~2.5 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 25 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.1 µm pore size, 4.18 % porosity bubble point 7.0 bar, air with water at 23 °C shipped in ambient
Safety InformationFlash Point F Not applicable Flash Point C Not applicable 593,25 € / 56 373 ₽Получить предложение -
Isopore Membrane Filter HTBP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: HTBPApplication0.4 µm pore size, hydrophilic polycarbonate membrane, 25 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial brown filter, plain filter, polycarbonate membrane sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 18 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~49 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 25 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.4 µm pore size, 5-20 % porosity bubble point 2.9 bar, air with water at 23 °C shipped in ambient 476,00 € / 45 231 ₽Получить предложение -
Isopore Membrane Filter TTTP04700
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: TTTPApplication2.0 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.0268 L/min-cm2-psi air flow rate, 140 °C max. temp., 932 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~180 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 47 mm thickness 23 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 2.0 µm pore size, 5.9 % porosity bubble point 0.6 bar, air with water at 23 °C shipped in ambient 287,89 € / 27 356 ₽Получить предложение -
Isopore Membrane Filter TTTP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: TTTPApplication2.0 µm pore size, hydrophilic polycarbonate membrane, 25 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.0268 L/min-cm2-psi air flow rate, 140 °C max. temp., 932 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~180 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 25 mm thickness 23 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 2.0 µm pore size, 5.9 % porosity bubble point 0.6 bar, air with water at 23 °C shipped in ambient 392,00 € / 37 249 ₽Получить предложение -
Isopore Membrane Filter VCTP04700
eCl@ss: 32031602 NACRES: NB.24 General descriptionThe Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: VCTPApplicationProduct Filters Out: Asbestos Particle Count
0.1 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationASTM is a registered trademark of American Society for Testing and Materials
ISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter Agency/Method in accordance with ASTM® D5755 sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.000367 L/min-cm2-psi air flow rate, 0.13 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 140 °C max. temp., ~2.5 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 47 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.1 µm pore size, 4.18 % porosity bubble point 7.0 bar, air with water at 23 °C shipped in ambient
Safety InformationFlash Point F Not applicable Flash Point C Not applicable 873,25 € / 82 980 ₽Получить предложение -
Isopore Membrane Filter TETP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: TETPApplication8.0 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 250 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 60 L/min-cm2-psi air flow rate, ~875 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 13 mm thickness 18 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 5-20 % porosity, 8.0 µm pore size shipped in ambient 227,50 € / 21 618 ₽Получить предложение -
Isopore Membrane Filter TCTP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: TCTP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication10.0 µm pore size, hydrophilic polycarbonate membrane, 25 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 69 L/min-cm2-psi air flow rate, ~900 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 25 mm thickness 16 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 10.0 µm pore size, 5-20 % porosity shipped in ambient 460,25 € / 43 735 ₽Получить предложение -
Isopore Membrane Filter DTTP02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: DTTP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication0.6 µm pore size, hydrophilic polycarbonate membrane, 25 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 10 L/min-cm2-psi air flow rate, 140 °C max. temp., 62 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~43 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 25 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.6 µm pore size, 5-20 % porosity bubble point 1.52 bar, air with water at 23 °C shipped in ambient 406,00 € / 38 580 ₽Получить предложение -
Isopore Membrane Filter GTBP04700
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: GTBP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication0.2 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial brown filter, plain filter, polycarbonate membrane sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 6 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~16 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 47 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.22 µm pore size, 5-20 % porosity bubble point 5.2 bar, air with water at 23 °C shipped in ambient 915,25 € / 86 971 ₽Получить предложение -
Isopore Membrane Filter TCTP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: TCTP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication10.0 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 69 L/min-cm2-psi air flow rate, ~900 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 13 mm thickness 16 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 10.0 µm pore size, 5-20 % porosity shipped in ambient 227,50 € / 21 618 ₽Получить предложение -
Isopore Membrane Filter TMTP01300
eCl@ss: 32031602 NACRES: NB.24 Application5.0 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 250 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 50 L/min-cm2-psi air flow rate, ~550 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 13 mm thickness 20 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 5-20 % porosity, 5.0 µm pore size shipped in ambient 269,50 € / 25 609 ₽Получить предложение -
Isopore Membrane Filter GTTP14250
eCl@ss: 32031602 NACRES: NB.24 Application0.2 µm pore size, hydrophilic polycarbonate membrane, 142 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.007 L/min-cm2-psi air flow rate, 140 °C max. temp., 3.36 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~16 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 142 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.22 µm pore size, 13.8 % porosity bubble point 5.2 bar, air with water at 23 °C shipped in ambient 1 006,25 € / 95 618 ₽Получить предложение -
Isopore Membrane Filter HTBP04700
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: HTBPApplication0.4 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial brown filter, plain filter, polycarbonate membrane sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 18 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~49 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 47 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.4 µm pore size, 5-20 % porosity bubble point 2.9 bar, air with water at 23 °C shipped in ambient 1 102,50 € / 104 764 ₽Получить предложение -
Isopore Membrane Filter HTTP09030
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: HTTPApplication0.4 µm pore size, hydrophilic polycarbonate membrane, 90 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 50 mL/min-cm2 water flow rate at 10 psi (typical results), 7 L/min air flow rate at 10 psi, 140 °C max. temp., 18 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi) filter diam. 90 mm thickness 10 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.4 µm pore size, 10-20 % porosity bubble point 1.5 bar (22 psi) at 23 °C shipped in ambient 378,00 € / 35 919 ₽Получить предложение -
Isopore Membrane Filter TSTP14250
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: TSTPApplication3.0 µm pore size, hydrophilic polycarbonate membrane, 142 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.868 L/min-cm2-psi air flow rate, 140 °C max. temp., 3628 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~475 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 142 mm thickness 22 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 11.3 % porosity, 3.0 µm pore size bubble point 0.32 bar, air with water at 23 °C shipped in ambient 1 034,25 € / 98 279 ₽Получить предложение -
Isopore Membrane Filter TCTP14250
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: TCTP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication10.0 µm pore size, hydrophilic polycarbonate membrane, 142 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 69 L/min-cm2-psi air flow rate, ~900 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 142 mm thickness 16 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 10.0 µm pore size, 5-20 % porosity shipped in ambient 1 275,75 € / 121 227 ₽Получить предложение -
Isopore Membrane Filter GTTP09030
eCl@ss: 32031602 NACRES: NB.24 Application0.2 µm pore size, hydrophilic polycarbonate membrane, 90 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.007 L/min-cm2-psi air flow rate, 140 °C max. temp., 3.36 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~16 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 90 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.22 µm pore size, 13.8 % porosity bubble point 5.2 bar, air with water at 23 °C shipped in ambient 374,50 € / 35 586 ₽Получить предложение -
Isopore Membrane Filter TSTP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: TSTPApplication3.0 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.868 L/min-cm2-psi air flow rate, 140 °C max. temp., 3628 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~475 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 13 mm thickness 22 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 11.3 % porosity, 3.0 µm pore size bubble point 0.32 bar, air with water at 23 °C shipped in ambient 271,25 € / 25 775 ₽Получить предложение -
Isopore Membrane Filter GTBP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: GTBP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication0.2 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial brown filter, plain filter, polycarbonate membrane sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 6 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~16 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 13 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.22 µm pore size, 5-20 % porosity bubble point 5.2 bar, air with water at 23 °C shipped in ambient 269,50 € / 25 609 ₽Получить предложение -
Isopore Membrane Filter RTTP01300
eCl@ss: 32031602 NACRES: NB.24 Application1.2 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.024 L/min-cm2-psi air flow rate, 140 °C max. temp., 687 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~175 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 13 mm thickness 24 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 1.2 µm pore size, 14.7 % porosity bubble point 1.0 bar, air with water at 23 °C shipped in ambient 269,50 € / 25 609 ₽Получить предложение -
Isopore Membrane Filter DTTP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: DTTP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication0.6 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 10 L/min-cm2-psi air flow rate, 140 °C max. temp., 62 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~43 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 13 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.6 µm pore size, 5-20 % porosity bubble point 1.52 bar, air with water at 23 °C shipped in ambient 269,50 € / 25 609 ₽Получить предложение -
Isopore Membrane Filter DTTP04700
eCl@ss: 32031602 NACRES: NB.24 Application0.6 µm pore size, hydrophilic polycarbonate membrane, 47 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 10 L/min-cm2-psi air flow rate, 140 °C max. temp., 62 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~43 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 47 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.6 µm pore size, 5-20 % porosity bubble point 1.52 bar, air with water at 23 °C shipped in ambient 491,75 € / 46 728 ₽Получить предложение -
Isopore Membrane Filter GTTP03700
eCl@ss: 32031602 NACRES: NB.24 Application0.2 µm pore size, hydrophilic polycarbonate membrane, 37 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.007 L/min-cm2-psi air flow rate, 140 °C max. temp., 3.36 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~16 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 37 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.22 µm pore size, 13.8 % porosity bubble point 5.2 bar, air with water at 23 °C shipped in ambient 445,66 € / 42 348 ₽Получить предложение -
Isopore Membrane Filter TMTP14250
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: TMTP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication5.0 µm pore size, hydrophilic polycarbonate membrane, 142 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 250 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 50 L/min-cm2-psi air flow rate, ~550 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 142 mm thickness 20 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 5-20 % porosity, 5.0 µm pore size shipped in ambient 1 016,75 € / 96 616 ₽Получить предложение -
Isopore Membrane Filter ATTP03700
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: ATTP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication0.8 µm pore size, hydrophilic polycarbonate membrane, 37 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 125 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 140 °C max. temp., 4.08 L/min-cm2-psi air flow rate, ~85 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 37 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.8 µm pore size, 5-20 % porosity bubble point 1.17 bar, air with water at 23 °C shipped in ambient 413,00 € / 39 245 ₽Получить предложение -
Isopore Membrane Filter HTTP03700
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: HTTPApplication0.4 µm pore size, hydrophilic polycarbonate membrane, 37 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 50 mL/min-cm2 water flow rate at 10 psi (typical results), 7 L/min air flow rate at 10 psi, 140 °C max. temp., 18 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi) filter diam. 37 mm thickness 10 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.4 µm pore size, 10-20 % porosity bubble point 1.5 bar (22 psi) at 23 °C shipped in ambient 439,25 € / 41 739 ₽Получить предложение -
Isopore Membrane Filter VCTP14250
eCl@ss: 32031602 NACRES: NB.24 General descriptionThe Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: VCTPApplication0.1 µm pore size, hydrophilic polycarbonate membrane, 142 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.000367 L/min-cm2-psi air flow rate, 0.13 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 140 °C max. temp., ~2.5 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 142 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.1 µm pore size, 4.18 % porosity bubble point 7.0 bar, air with water at 23 °C shipped in ambient
Safety InformationFlash Point F Not applicable Flash Point C Not applicable 1 636,25 € / 155 483 ₽Получить предложение -
Isopore Membrane Filter ATTP14250
eCl@ss: 32031602 NACRES: NB.24 Application0.8 µm pore size, hydrophilic polycarbonate membrane, 142 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 125 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 140 °C max. temp., 4.08 L/min-cm2-psi air flow rate, ~85 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 142 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.8 µm pore size, 5-20 % porosity bubble point 1.17 bar, air with water at 23 °C shipped in ambient 1 030,75 € / 97 946 ₽Получить предложение -
Isopore Membrane Filter VCTP01300
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: VCTPApplication0.1 µm pore size, hydrophilic polycarbonate membrane, 13 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.000367 L/min-cm2-psi air flow rate, 0.13 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 140 °C max. temp., ~2.5 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 13 mm thickness 25 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.1 µm pore size, 4.18 % porosity bubble point 7.0 bar, air with water at 23 °C shipped in ambient
Safety InformationFlash Point F Not applicable Flash Point C Not applicable 227,50 € / 21 618 ₽Получить предложение -
Isopore Membrane Filter HTTP14250
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: HTTPApplication0.4 µm pore size, hydrophilic polycarbonate membrane, 142 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 50 mL/min-cm2 water flow rate at 10 psi (typical results), 7 L/min air flow rate at 10 psi, 140 °C max. temp., 18 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi) filter diam. 142 mm thickness 10 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 0.4 µm pore size, 10-20 % porosity bubble point 1.5 bar (22 psi) at 23 °C shipped in ambient 1 008,00 € / 95 784 ₽Получить предложение -
Isopore Membrane Filter TMTP09030
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Code: TMTP
Filter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis AssaysApplication5.0 µm pore size, hydrophilic polycarbonate membrane, 90 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 140 °C max. temp., 250 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), 50 L/min-cm2-psi air flow rate, ~550 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 90 mm thickness 20 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 5-20 % porosity, 5.0 µm pore size shipped in ambient 381,50 € / 36 252 ₽Получить предложение -
Isopore Membrane Filter RTTP14250
eCl@ss: 32031602 NACRES: NB.24 General descriptionFilter Type: Screen filter
The Isopore membrane is a polycarbonate, track-etched screen filter recommended for all analyses in which the sample is viewed on the surface of the membrane. Isopore membrane offers distinct advantages for the analysis of airborne contaminants and other particles using optical or electron microscopy. The Isopore membrane is composed of polycarbonate film, which has a smooth, glass-like surface for clearer sample observation. The unique manufacturing process of the membrane ensures a precise pore diameter and a consistent pore size for accurate separation of samples by size. Matched-weight filters are not usually required because of low, constant tar and ash weights.
Features & Benefits:
•Membrane structure retains particles on the surface, simplifying counting and analysis
•Isopore membranes do not stain, resulting in low background interference
•Non-hygroscopic, allowing for rapid drying and reduced sample analysis time
•Translucent material does not require clearing for transmitted light microscopy; also available in brown variety
Applications:
Air Monitoring, Epifluorescent Microscopy, Chemotaxis Assays
Filter Code: RTTPApplication1.2 µm pore size, hydrophilic polycarbonate membrane, 142 mm diameterCautionPossible reduction in flow rates may occur after autoclaving.Legal InformationISOPORE is a trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial plain filter, polycarbonate membrane, white filter sterility non-sterile feature hydrophilic Торговая марка Isopore™, Millipore parameter 0.024 L/min-cm2-psi air flow rate, 140 °C max. temp., 687 mL/min-cm2-psi water flow rate (maximum flow rate per 1.0 psi), ~175 mL/min-cm2 water flow rate at 10 psi (typical results) filter diam. 142 mm thickness 24 µm gravimetric extractables <1% refractive index n/D 1.6 matrix Isopore™ pore size 1.2 µm pore size, 14.7 % porosity bubble point 1.0 bar, air with water at 23 °C shipped in ambient 1 027,25 € / 97 613 ₽Получить предложение -
LCR Membrane Filter FHLC04700
eCl@ss: 32031602 NACRES: NB.24 General descriptionLCR membrane is an unsupported, hydrophilic PTFE membrane compatible with all commonly used HPLC solvents. The membrane undergoes a special treatment process to remove any residual extractabes, ensuring that it will not add anything to your HPLC solvents, providing clearer analysis results.
Features & Benefits:
•Hydrophilic membrane can be used to filter aqueous fluids without prior wetting
•Ultraclean membrane will not add extractables to your samples or solvents
Applications:
HPLC Mobile Phase Filtration; Clarifying Acids, Bases and Dilute Protein Solutions; Isolating RNA
Filter Code: FHLC
Filter Type: Screen filterApplication0.45 µm pore size, hydrophilic PTFE, 47 mm diameterПараметрыmaterial PTFE membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Millipore parameter 130 °C max. temp. filter diam. 47 mm thickness 140 μm , maximum gravimetric extractables 0.5% pore size 0.45 μm pore size, 80 % porosity shipped in ambient 1 107,04 € / 105 195 ₽Получить предложение -
LCR Membrane Filter FHLC01300
eCl@ss: 32031602 NACRES: NB.24 Параметрыmaterial PTFE membrane, plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Millipore parameter 130 °C max. temp. filter diam. 13 mm thickness 140 μm , maximum gravimetric extractables 0.5% pore size 0.45 μm pore size, 80 % porosity shipped in ambient 581,00 € / 55 209 ₽Получить предложение -
LCR Membrane Filter FHLC02500
eCl@ss: 32031602 NACRES: NB.24 General descriptionLCR membrane is an unsupported, hydrophilic PTFE membrane compatible with all commonly used HPLC solvents. The membrane undergoes a special treatment process to remove any residual extractabes, ensuring that it will not add anything to your HPLC solvents, providing clearer analysis results.
Features & Benefits:
•Hydrophilic membrane can be used to filter aqueous fluids without prior wetting
•Ultraclean membrane will not add extractables to your samples or solvents
Applications:
HPLC Mobile Phase Filtration; Clarifying Acids, Bases and Dilute Protein Solutions; Isolating RNA
Filter Code: FHLC
Filter Type: Screen filterApplication0.45 µm pore size, hydrophilic PTFE, 25 mm diameterПараметрыmaterial PTFE membrane (hydrophobic), plain filter, white filter sterility non-sterile feature hydrophilic Торговая марка Millipore parameter 130 °C max. temp. filter diam. 25 mm thickness 140 μm , maximum gravimetric extractables 0.5% pore size 0.45 μm pore size, 80 % porosity shipped in ambient 813,75 € / 77 326 ₽Получить предложение
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
