Milli-Q® Consumables
- Сортировать:
- Вид таблицей
-
Photooxidation UV Lamp SYN185UV1
eCl@ss: 33050190 NACRES: JA.14 General descriptionThis photooxidation UV lamp is designed to photooxidize organic compounds in water. The dual wavelength reduces TOC (total organic compounds) to less than 5 ppb for sensitive applications.
UV lamps should be periodically replaced during system maintenance.
For use with Direct-Q® and Simplicity® water purification systems.ApplicationThe photooxidation UV lamp is recommended for laboratories working with organic-sensitive applications such as HPLC, GC or TOC analyses.Features and Benefits- 185 / 254 nm UV lamp
- Photooxidative effect
- Easy replacement
Legal InformationDIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
SIMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыfeature 6W UV absorption : 185 nm Amax compatibility for use with Direct-Q® UV, for use with Simplicity® UV shipped in ambient Узнать цену -
Photooxidation UV Lamp ZLUVWPM01
eCl@ss: 33050190 NACRES: JA.14 General descriptionThis Photooxidation UV lamp is a built-in water purification consumable responsible for producing Type 1 ultrapure water from pretreated water.
The dual UV wavelength (185 nm/254 nm) photo-oxidizes trace organic contaminants in ultrapure water to reduce TOC (total organic compounds) to less than 5 ppb.
For use with Synergy® water purification systems.ApplicationThis photooxidation UV lamp removes traces of organic contaminants from water.
Features and Benefits- 185 nm and 254 nm UV lamp.
- Oxidizes organic compounds to inorganic species.
Legal InformationSYNERGY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыAC/DC input 230 V, 50-60 Hz resistivity 18.2 M-cm (at 25 °C) W x D x H 710 mm x 460 mm x 430 mm impurities <0.001 EU/mL endotoxin, <0.1 cfu/mL bacteria total organic carbon (TOC) residue <5 ppb compatibility for use with Synergy® UV shipped in ambient Узнать цену -
Photooxidation UV Lamp CFMQ18501
eCl@ss: 33050190 NACRES: JA.14 General descriptionReplacement UV Lamp for photooxidation of organic compounds, used with Milli-Q® and Milli-Q® Plus (1989-1996) systems.Legal InformationMilli-Q is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыcompatibility for use with Milli-Q® Plus shipped in ambient Узнать цену -
Polygard® CR Cartridge Filter CR0101002
eCl@ss: 33050190 General descriptionPolygard® CR Filters are designed for particle removal applications in liquids and gases. The graded-density depth structure of Polygard® CR filter media provides maximum filtration capacity, and the all-polypropylene construction offers low extractable levels and broad chemical compatibility. Cartridges are robust, strong, resilient, and are designed to withstand multiple steam-in-place cycles.
The Reverse Osmosis membrane removes 95%-99% of contaminants including ions, particulates, bacteria, and organic molecules (MW >200kDa).ApplicationPolygard®-CR high-efficiency cartridge filters are widely used in the beverage industry for liquid and gas filtration applications to protect tighter filters.
Features and Benefits- A broad range of micron ratings to match a wide array of particle removal applications.
- Nominal particle retention rating.
- Low extractable levels.
- High-capacity media.
- Designed for rigorous process conditions and broad chemical compatibility.
Legal InformationPOLYGARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыH 25.4 cm (10.0 in.) pore size 1 µm pore size shipped in ambient 483,00 € / 46 199 ₽Получить предложение -
PrePak Pretreatment Pack PRPK00001
eCl@ss: 33050190 General descriptionProper pretreatment is an essential step in producing the desired final product water quality. The choice of the pretreatment is made according to the flow rate of the feed water.
The PrePak 1 pretreats tap water by removing particles, organic compounds, and free chlorine. It is intended for use with larger water purification systems as additional pretreatment to the systems Progard® TL pretreatment packs.
For use with Elix®, AFS®, and RiOs™ water purification systems.ApplicationProtects and maintains good performance of the reverse osmosis (RO) membrane.
Features and Benefits- Optimal protection of the water system.
- Ensures system lifetime and performance are optimized.
- 0.5 µm depth-filtration to remove particles.
- Activated carbon to remove chlorine.
Legal InformationAFS is a registered trademark of Merck KGaA, Darmstadt, Germany
ELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыfeature Optimal protection of water system and optimised performance; activated C; SDI > 5 & < 12 pore size 0.5 µm pore size (CRW5 type) compatibility for use with AFS®, for use with Elix®, for use with RiOs™ shipped in ambient Узнать цену -
PrePak Pretreatment Pack PRPK0L003
eCl@ss: 33050190 NACRES: JA.14 General descriptionProper pretreatment is an essential step in producing the desired final product water quality. The choice of the pretreatment is made according to the flow rate of the feed water.
The PrePak L3 includes two pre-filtration stages to pretreat tap water by removing large particles. It is intended for use with larger water purification systems as additional pretreatment to the systems Progard® TL pretreatment packs.
For use with Elix® 20/35/70/100 systems and RiOs™ 30/50/100/150/200 water purification systems.ApplicationProvides optimal protection of the RO membrane.
Features and Benefits- Optimal protection of the water system.
- Ensures system lifetime and performance are optimized.
- 10 µm and 5 µm depth-filtration media for particle removal.
Legal InformationELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыfeature
removal of large particles from tap water
recommended for SDI > 10compatibility for use with Elix®, for use with RiOs™ shipped in ambient Узнать цену -
PrePak Pretreatment Pack PRPK0L0S1
eCl@ss: 33050190 NACRES: JA.14 General descriptionProper pretreatment is an essential step in producing the desired final product water quality. The choice of the pretreatment is made according to the flow rate of the feed water. The PrePak L1 pretreats tap water by removing large particles, organic compounds, and free chlorine. It is intended for use with larger water purification systems as additional pretreatment to the systems Progard® TL pretreatment packs.
For use with Elix® 20/35/70/100 systems and RiOs™ 30/50/100/150/200 water purification systems.ApplicationProvides optimal protection of the RO membrane.
Features and Benefits- Ensures system lifetime and performance are optimized.
- 0.5 µm depth-filtration to remove particles.
- Activated carbon to remove chlorine.
- Silver-impregnated activated carbon provides free chlorine reduction and bacteriostatic protection.
Legal InformationELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыfeature recommended for SDI > 2 and high chlorine level pore size 0.5 µm pore size (CRW5 type) compatibility for use with Elix®, for use with Elix® Gulfstream, for use with Elix® Large, for use with RiOs™ Large, for use with RiOs™ shipped in ambient Узнать цену -
PrePak Pretreatment Pack PRPK0L002
eCl@ss: 33050190 NACRES: JA.14 General descriptionProper pretreatment is an essential step in producing the desired final product water quality. The choice of the pretreatment is made according to the flow rate of the feed water.
The PrePak L2 pretreats tap water by removing large particles. It is intended for use with larger water purification systems as additional pretreatment for the systems Progard® TL pretreatment packs.
For use with Elix® 20/35/70/100 and RiOs™ 30/50/100/150/200 water purification systems.ApplicationProvides optimal protection of the RO membrane.
Features and Benefits- Optimal protection of the water system.
- Ensures system lifetime and performance are optimized.
- 5 µm and 1 µm depth-filtration media for particle removal.
Legal InformationELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыfeature removal of large particles from tap water
recommended for SDI > 5compatibility for use with Elix®, for use with RiOs™ shipped in ambient Узнать цену -
PrePak Pretreatment Pack PRPK000A1
eCl@ss: 33050190 General descriptionProper pretreatment is an essential step in producing the desired final product water quality. The choice of the pretreatment is made according to the flow rate of the potable water.
The Prepak filter pretreatment pack is an additional pretreatment in case of feed water containing high levels of particulates, chlorine, or organics. It is intended for use with Milli-Q® water purification systems.ApplicationLab water purification system consumable for use with Milli-Q® IQ 7003/5/10/15 and Milli-Q® IX 7003/5/10/15 water purification systems.
Features and Benefits- Optimal protection of the water system.
- Ensures system lifetime and performance are optimized.
Components- Activated carbon for free chlorine reduction and bacteriostatic protection.
- Depth-filtration for particle removal.
Legal InformationMilli-Q is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial polyethylene housing, polypropylene housing packaging pkg of 1 unit parameter 6 bar pressure, 2 °C temp. range (40 °C), 5.0 L/min flow rate H x W x D 21.1 in. x 6.1 in. x 3.1 in. pore size 0.5 µm pore size (High capacity filter CRW05 type) compatibility for use with Milli-Q® IX 7003, for use with Milli-Q® IX 7005, for use with Milli-Q® IX 7010, for use with Milli-Q® IX 7015, for use with Milli-Q® IQ 7003, for use with Milli-Q® IQ 7005, for use with Milli-Q® IQ 7010, for use with Milli-Q® IQ 7015 shipped in ambient Узнать цену -
Progard® Pretreatment Pack PR0G000T3
eCl@ss: 33050190 NACRES: JA.14 General descriptionProgard® Pretreatment Pack is designed to remove large particles, organic compounds and free chlorine from tap water. This protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation.
Progard® T3 Pretreatment Pack ensures that your system lifetime and performance are optimized.
Replacement of consumables when requested by the system is key to maintain the systems performance within specifications.
Designed for use with Milli-Q® Direct water purification systems.ApplicationRemoval of organics, free chlorine and particles from tap water to protect RO membrane.Features and Benefits- The Progard® T3 pretreatment pack is constructed from polypropylene and EPDM.
- Suitable for tap water feed with silt density index (SDI) < 5, Cl2 < 1 ppm.
- Natural activated carbon media exhibits a high surface area and adsorption kinetic, tolerating feed water containing up to 1 ppm of chlorine.
- To prevent the bacteria proliferation, the natural activated carbon selected has been impregnated with silver, a proven bacteriostatic agent.
- Depth filter media exhibits a high capacity and optimized retention, tolerating feed water with SDI up to 5.
- Incorporates polyphosphate, specifically selected to avoid scaling without releasing ions.
- 100% traceability with e-Sure Tag - T3 pretreatment packs incorporate RFID technology. This provides instant visibility on pack parameters and ensures a safe and optimal performance of the system, giving full traceability.
Legal InformationMilli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыdescription Removal of chlorine and organic compunds traces feature Optimal protection of RO membrane, optimized system lifetime and performance, feed water with a silt density index up to 5. Торговая марка Progard® halogenated residue <1 ppm (Cl2) compatibility for use with Milli-Q® Direct shipped in ambient Узнать цену -
Progard® Pretreatment Pack PR0G00002
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe Progard® 2 Pretreatment Pack is designed to pretreat water by removing large particles, organic compounds and free chlorine from tap water. This protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation. Progard® 2 Pretreatment Pack ensures that your system lifetime and performance are optimized. Designed for use with AFS®, Direct-Q® Elix® and RiOs™ 5/8/16 water purification systems. Replacement of consumables when requested by the system is key to maintain the systems performance within specifications.ApplicationRemoval of organics, free chlorine, particles and colloids from tap water for optimal protection of the RO membrane.Features and Benefits- The Progard® 2 pretreatment pack is constructed from polypropylene and EPDM.
- Suitable for tap water feed with silt density index (SDI) < 12, Cl2 < 3 ppm and TOC < 2000 ppb.
- Natural activated carbon media exhibits a high surface area and adsorption kinetic, tolerating feed water containing up to 3 ppm of chlorine and 2000 ppb of TOC.
- Depth filter media exhibits a high capacity and optimized retention, tolerating feed water with SDI up to 12.
- Incorporates polyphosphate, specifically selected to avoid scaling without releasing ions.
Legal InformationAFS is a registered trademark of Merck KGaA, Darmstadt, Germany
DIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
ELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыcomposition polyphosphate, activated carbon and 0.5 µm depth filter. Торговая марка Progard® H 39.5 cm (15.5 in.) total organic carbon (TOC) residue <2000 ppb halogenated residue <3 ppm (Cl2) compatibility for use with AFS® (1999-2012), for use with Direct-Q® (1997-2010), for use with Elix® (1997-2008), for use with RiOs™ (1997-2012) shipped in ambient Узнать цену -
Progard® Pretreatment Pack PR0G0TNP2
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe Progard® TNP2 Pretreatment Pack pretreats tap water by removing large particles, organic compounds and free chlorine. This protects the reverse osmosis (RO) membrane against organic fouling and chlorine oxidation.
Progard® TNP2 Pretreatment Pack ensures that your system lifetime and performance are optimized.
Replacement of consumables, when requested by the system, is key to maintain the systems performance within specifications.
Designed for use with AFS® Essential, Elix® Advantage, Elix® Reference, Elix® Essential, Milli-Q® Integral, and RiOs™ Essential water purification systems.ApplicationRemoves free chlorine, organics and particles to protect the RO membrane.
Features and Benefits- The Progard® TNP2 pretreatment pack is constructed from polypropylene and EPDM.
- Suitable for tap water feed with silt density index (SDI) < 12 and Cl2 < 3 ppm, and TOC < 2000 ppb.
- Natural activated carbon media exhibits a high surface area and adsorption kinetic, tolerating feed water containing up to 3 ppm of chlorine and 2000 ppb of TOC. Removes free chlorine and organic compounds.
- To prevent the bacteria proliferation, the natural activated carbon selected has been impregnated with silver, a proven bacteriostatic agent.
- Depth filter media exhibits a high capacity and optimized retention, tolerating feed water SDI up to 12 and removes particles.
- 100% traceability with e-Sure Tag - Incorporates RFID technology. This provides instant visibility on pack parameters and ensures a safe and optimal performance of the system, giving full traceability.
Legal InformationAFS is a registered trademark of Merck KGaA, Darmstadt, Germany
ELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыmaterial EPDM rubber , polypropylene feature Optimal protection of Reverse Osmosis (RO) membrane, optimized system lifetime and performance. Removal of large particles, organic compounds and free chlorine from feed water with a silt density index (SDI) up to 12 Торговая марка Progard® H 39.5 cm (15.5 in.) total organic carbon (TOC) residue <2000 ppb halogenated residue <3 ppm (Cl2) compatibility for use with AFS®, for use with Elix® Advantage, for use with Elix® Essential UV, for use with Elix® Essential, for use with Elix® Reference, for use with Milli-Q® Integral, for use with RiOs™ Essential shipped in ambient Узнать цену -
Progard® Pretreatment Pack PR0G00001
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe Progard® 1 Pretreatment Pack is designed to pretreat water by removing large particles, organic compounds and free chlorine from tap water. This protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation.
Progard® 1 Pretreatment Pack ensures that your system lifetime and performance are optimized.
Replacement of consumables when requested by the system is key to maintain the systems performance within specifications.
Designed for use with Direct-Q®, Elix® and RiOs™ 5/8/16 water purification systems.ApplicationRemoval of organics, free chlorine, particles and colloids from tap water to protect the RO membrane.
Features and Benefits- The Progard® 1 pretreatment pack is constructed from polypropylene and EPDM.
- Suitable for tap water feed with silt density index (SDI) < 5 and Cl2 < 1 ppm.
- Natural activated carbon media exhibits a high surface area and adsorption kinetic, tolerating feed water containing up to 1 ppm of chlorine.
- Depth filter media exhibits a high capacity and optimized retention, tolerating feed water with SDI up to 5.
- Incorporates polyphosphate, specifically selected to avoid scaling without releasing ions.
Components
Combination of three purification media:- Activated carbon removes free chlorine and organic compounds
- Depth-filtration media removes particles and colloids
- Anti-scaling agent minimizes the risk of scale formation
Legal InformationDIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
ELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыmaterial polypropylene (and EPDM) Торговая марка Progard® H 21 cm (8.3 in.) halogenated residue <1 ppm (Cl2) compatibility for use with Direct-Q® (1997-2010), for use with Elix® (1997-2008), for use with RiOs™ (1997-2012) shipped in ambient Узнать цену -
Progard® Pretreatment Pack PR0G00003
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe Pretreatment Pack cartridge is designed to pretreat water by removing large particles, organic compounds and free chlorine from tap water. This protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation.
Progard® 3 Pretreatment Pack ensures that your system lifetime and performance are optimized.
Replacement of consumables when requested by the system is key to maintain the systems performance within specifications.
Designed for use with AFS® water purification systems.ApplicationRemoval of organics, free chlorine and particles from tap water for optimal protection of the RO membrane.
Features and Benefits- The Progard® 3 pretreatment pack is constructed from polypropylene and EPDM.
- Suitable for tap water feed with silt density index (SDI) < 5, Cl2 < 1 ppm.
- Natural activated carbon media exhibits a high surface area and adsorption kinetic, tolerating feed water containing up to 1 ppm of chlorine.
- To prevent the bacteria proliferation, the natural activated carbon selected has been impregnated with silver, a proven bacteriostatic agent.
- Depth filter media exhibits a high capacity and optimized retention, tolerating feed water with SDI up to 5.
- Incorporates polyphosphate, specifically selected to avoid scaling without releasing ions.
Legal InformationAFS is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial EPDM rubber , polypropylene description Removal of chlorine and organic compunds traces feature Optimal protection of RO membrane, optimized system lifetime and performance, feed water with a silt density index up to 5. Торговая марка Progard® halogenated residue <1 ppm (Cl2) pore size 0.5 µm pore size compatibility for use with AFS® (2003-2012) shipped in ambient Узнать цену -
Progard® S Pretreatment Pack PR0G000S2
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe Progard® S2 Pretreatment Pack is designed to pretreat water by removing large particles, organic compounds and free chlorine from tap water. This protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation.
Progard® S2 Pretreatment Pack ensures that your system lifetime and performance are optimized.
Replacement of consumables when requested by the system is key to maintain the systems performance within specifications.
Designed for use with Direct-Q®, Elix® and RiOs™ 5/8/16 water purification systems.ApplicationRemoval of organics, free chlorine and particles from tap water to protect the RO membrane.
Features and Benefits- The Progard® S2 pretreatment pack is constructed from polypropylene and EPDM.
- Suitable for tap water feed with silt density index (SDI) < 12, Cl2 < 3 ppm and TOC < 2000 ppb.
- Natural activated carbon media exhibits a high surface area and adsorption kinetic, tolerating feed water containing up to 3 ppm of chlorine and 2000 ppb of TOC.
- To prevent the bacteria proliferation, the natural activated carbon selected has been impregnated with silver, a proven bacteriostatic agent.
- Depth filter media exhibits a high capacity and optimized retention, tolerating feed water with SDI up to 12.
- Incorporates polyphosphate, specifically selected to avoid scaling without releasing ions.
Legal InformationDIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
ELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыmaterial EPDM rubber , polypropylene feature Optimal protection of Reverse Osmosis (RO) membrane, optimized system lifetime and performance. Removal of large particles, organic compounds and free chlorine from feed water with a silt density index (SDI) up to 12. Торговая марка Progard® H 39.5 cm (15.5 in.) total organic carbon (TOC) residue <2000 ppb halogenated residue <3 ppm (Cl2) compatibility for use with Direct-Q® (1997-2010), for use with Elix® (1997-2008), for use with RiOs™ (1997-2012) shipped in ambient Узнать цену -
Progard® S Pretreatment Pack PR0G000S1
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe Progard® S1 Pretreatment Pack is designed to pretreat water by removing large particles, organic compounds and free chlorine from tap water. This protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation.
Progard® S1 Pretreatment Pack ensures that your system lifetime and performance are optimized.
Replacement of consumables when requested by the system is key to maintain the systems performance within specifications.
Designed for use with Direct-Q®, Elix® and RiOs™ 5/8/16 water purification systems.ApplicationRemoval of organics, free chlorine and particles from tap water to protect the RO membrane.
Features and Benefits- The Progard® S1 pretreatment pack is constructed from polypropylene and EPDM.
- Suitable for tap water feed with silt density index (SDI) < 5 and Cl2 < 1 ppm.
- Natural activated carbon media exhibits a high surface area and adsorption kinetic, tolerating feed water containing up to 1 ppm of chlorine.
- To prevent the bacteria proliferation, the natural activated carbon selected has been impregnated with silver, a proven bacteriostatic agent.
- Depth filter media exhibits a high capacity and optimized retention, tolerating feed water with an SDI up to 5.
- Incorporates polyphosphate, specifically selected to avoid scaling without releasing ions.
Components
Combination of three purification media:- Activated carbon removes free chlorine and organic compounds
- Depth-filtration media removes particles and colloids
- Anti-scaling agent minimizes the risk of scale formation
Legal InformationDIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
ELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыmaterial polypropylene (and EPDM) Торговая марка Progard® H 21 cm (8.3 in.) halogenated residue <1 ppm (Cl2) compatibility for use with Direct-Q® (1997-2010), for use with Elix® (1997-2008), for use with RiOs™ (1997-2012) shipped in ambient Узнать цену -
Progard® TL1 Pretreatment Pack PR0GTLCS1
eCl@ss: 33050190 NACRES: JA.14 General descriptionProper pretreatment is an essential step in producing the desired final product water quality. The choice of the pretreatment is made according to the flow rate of the feed water.
The Progard® TL1-C Pretreatment Pack pretreats tap water by removing large particles, organic compounds and free chlorine. This protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation.
Intended for use with larger water purification systems: Elix® 20/35/70/100 and RiOs™ 30/50/100/150/200.ApplicationFor optimal protection of the RO membrane and automatic RO maintenance.Features and Benefits- Optimal protection of the water system.
- Ensures system lifetime and performance are optimized.
- Polyphosphate - specifically selected to avoid scaling without releasing ions.
- Silver-impregnated activated carbon for free chlorine reduction and bacteriostatic protection.
- Depth-filtration for particle removal.
- ROProtect CR for automatic RO maintenance.
Legal InformationELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыfeature removal of large particles, organic compounds and free chlorine from tap water Торговая марка Progard® compatibility for use with Elix®, for use with Elix® Gulfstream, for use with Elix® Large, for use with RiOs™ Large, for use with RiOs™ shipped in ambient Узнать цену -
Progard® TL1 Pretreatment Pack PR0GTL0S1
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe Progard® TL1 Pretreatment Pack removes large particles, organic compounds and free chlorine from tap water, before this water feeds your water purification system. This protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation.
Progard® TL1 Pretreatment Pack ensures that your system lifetime and performance are optimized.
Replacement of consumables, when requested by the system, is key to maintain the systems performance within specifications.
Designed for use with Elix® Large, Elix® Gulfstream and RiOs™ Large water purification systems.ApplicationRemoves particles, organics and free chlorine to protect the RO membrane.
Features and Benefits- Protects RO membrane against mineral scaling, organic fouling and chlorine oxidation.
- Depth filter media exhibits high capacity and optimized retention of colloids.
- e-Sure RFID tag ensures full traceability and provides instant visibility of pack parameters
- Silver-impregnated activated carbon reduces free chlorine and provides bacteriostatic protection.
- Polyphosphate protects against scaling without releasing ions.
- Replace every 6 months for optimal results.
Legal InformationELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыmaterial cartridge (Polyphosphate for anti-scaling protection. Silver-impregnated activated carbon for free chlorine reduction and bacteriostatic protection), cartridge (activated carbon) feature removal of large particles and free chlorine from tap water , removal of large particles, organic compounds and free chlorine from tap water Торговая марка Progard® compatibility for use with Elix®, for use with Elix® Gulfstream, for use with Elix® Large, for use with RiOs™ Large, for use with RiOs™ shipped in ambient Узнать цену -
Progard® TS2 Pretreatment Pack PR0G0T0S2
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe Progard® TS2 Pretreatment Pack is designed to pretreat tap water prior to purification by reverse osmosis (RO). Tap water is pretreated by effectively removing contaminants such as free chlorine, large particles and colloids, organic compounds and hardness. This protects the RO membrane from organic fouling, chlorine oxidation and mineral scaling. It also increases the lifetime of the water purification system and optimizes its performance.ApplicationPurified water produced using Milli-Q®, AFS®, RiOs™, and Elix® water purification systems equipped with the Progard® TS2 pretreatment pack is used for various laboratory applications.Features and Benefits- Protects RO membrane against mineral scaling, organic fouling and chlorine oxidation.
- Polyphosphates provide protection against scaling.
- Silver-impregnated activated carbon reduces free chlorine and prevents bacteria proliferation.
- Depth-filtration removes particles and colloids.
- e-Sure RFID tag ensures full traceability and provides instant visibility of pack parameters.
- Replace every 6 months for optimal results.
Legal InformationAFS is a registered trademark of Merck KGaA, Darmstadt, Germany
ELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
PROGARD is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыmaterial EPDM rubber , cartridge (Polyphosphate for anti-scaling protection. Silver-impregnated activated carbon for free chlorine reduction and bacteriostatic protection.), cartridge (activated carbon), polypropylene feature removal of large particles and free chlorine from tap water H 39.5 cm (15.5 in.) compatibility for use with AFS®, for use with Elix® Advantage, for use with Elix® Essential UV, for use with Elix® Essential, for use with Elix® Reference, for use with Milli-Q® Integral, for use with RiOs™ Essential shipped in ambient Узнать цену -
Q-Gard® Purification Cartridge QGARDT2X1
eCl@ss: 33050190 NACRES: JA.14 General descriptionQ-Gard® T2 purification cartridge is a replacement cartridge designed to remove ionic and organic contaminants down to trace levels from DI water. The cartridge is constructed with clean and high-purity materials to minimize leaching of extractable contaminants. It contains a microfilter for particulates removal, activated carbon for organics adsorption, and mixed-bed ion-exchange resin for ion removal. Q-Gard® T2 Purification Cartridge can be used with Milli-Q® Advantage A10 / Reference water purification systems.ApplicationRemoval of ionic and organic water contaminants.Features and Benefits- Genuine consumable for the replacement of Q-Gard® QGARDT2X1 purification cartridge.
- Generates ionic and organic contaminant-free water by ion exchange, activated carbon, and depth filtration technologies.
- Certificate of Quality available online.
ComponentsVirgin ion-exchange resins for deionizationLegal InformationMilli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-GARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыfeature can produce high resistivity water from purification media Торговая марка Q-Gard® resistivity >18.0 M-cm (at 25 °C) capacity 53 g ion exchange capacity (NaCl)(Dynamic Capcity is greater than 34 g NaCl) compatibility for use with Milli-Q® Advantage A10, for use with Milli-Q® Reference shipped in ambient Узнать цену -
Q-Gard® Purification Cartridge QGARDT1X1
eCl@ss: 33050190 NACRES: JA.14 General descriptionQ-Gard® T1 purification cartridge is designed to remove ionic and organic contaminants down to trace levels from Elix®, RO or distilled feed water. The cartridge is constructed with clean and high-purity materials to minimize leaching of extractable contaminants. Q-Gard® T1 Purification Cartridge can be used with Milli-Q® Advantage A10 / Reference water purification systems.Features and Benefits- Genuine consumable for the replacement of Q-Gard® - QGARDT1X1 cartridge filter.
- Generates ionic and organic contaminant-free water by ion exchange, and activated carbon technologies.
- Certificate of Quality available online.
ComponentsVirgin ion-exchange resins for deionizationLegal InformationELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-GARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыfeature can produce high resistivity water from purification media Торговая марка Q-Gard® resistivity >18.0 M-cm (at 25 °C) total organic carbon (TOC) residue <10 ppb capacity 77 g ion exchange capacity (NaCl)(Dynamic Capcity is greater than 50 g NaCl) compatibility for use with Milli-Q® Advantage A10, for use with Milli-Q® Reference shipped in ambient Узнать цену -
Q-Gard® Purification Cartridge QGARD00R1
eCl@ss: 33050190 NACRES: JA.14 General descriptionQ-Gard® 1 Purification Cartridge is designed to remove ionic and organic contaminants down to trace levels when fed with Elix® / RO / distilled water.
The cartridge is constructed with clean and high-purity materials to minimize leaching of extractable contaminants.
It contains a microfilter for particulate removal, activated carbon for organics adsorption, and mixed-bed ion-exchange resin for ion removal.
The Q-Gard® 1 Purification Cartridge can be used with Milli-Q® Academic / Biocel / Element / Gradient / Synthesis water purification systems.ApplicationRemoval of ionic and organic water contaminants.Features and Benefits- Q-Gard® 1 Purification Cartridge is tailored to the feed-water source to optimize the performance of downstream purification media to ensure consistent results.
- Genuine water purification consumable for replacement of the Q-Gard® QGARD00R1 cartridge filter.
- Purification method involves ion-exchange, activated carbon, and depth filtration.
- Certificate of Quality available online.
Legal InformationELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-GARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыТорговая марка Q-Gard® resistivity >18.0 M-cm (at 25 °C) application(s) ion chromatography: suitable total organic carbon (TOC) residue <10 ppb capacity 77 g ion exchange capacity (NaCl)(Dynamic Capacity is more than 50 g NaCl) compatibility for use with Milli-Q® Academic, for use with Milli-Q® Biocel, for use with Milli-Q® Element, for use with Milli-Q® Gradient, for use with Milli-Q® Synthesis shipped in ambient Узнать цену -
Q-Gard® Purification Cartridge QGARD00D2
eCl@ss: 33050190 NACRES: JA.14 General descriptionQ-Gard® 2 Purification Cartridge is designed to remove ionic and organic contaminants down to trace levels when fed with DI pure water. The cartridge is constructed with clean and high-purity materials to minimize the leaching of extractable contaminants. It contains a microfilter for particulate removal, activated carbon for organics adsorption and mixed-bed ion-exchange resin for ion removal. Q-Gard® 2 Purification Cartridge can be used with Milli-Q® Academic / Biocel / Element / Gradient / Synthesis water purification systems.ApplicationThis polishing cartridge contains ion exchange resins for removal of trace ions, and is recommended for any laboratory work requiring very low levels of ions.
Features and Benefits- Q-Gard® 2 Purification Cartridge is tailored to the feed-water source to optimize the performance of downstream purification media to ensure consistent results.
- Purification method involves ion-exchange, activated carbon, and depth filtration.
- Genuine water purification consumable for replacement of the Q-Gard® QGARD00D2 cartridge filter.
- Certificate of Quality available online.
Legal InformationMilli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-GARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial polypropylene and polyethylene feature purification cartridges qualified for low organics and ionic extractables. Торговая марка Q-Gard® resistivity >18.0 M-cm (at 25 °C) capacity 53 g ion exchange capacity (NaCl)(Dynamic Capacity is more than 34 g NaCl) compatibility for use with Milli-Q® Academic, for use with Milli-Q® Biocel, for use with Milli-Q® Element, for use with Milli-Q® Gradient, for use with Milli-Q® Synthesis shipped in ambient Узнать цену -
Q-Gard® Purification Cartridge QGARDTL01
eCl@ss: 33050190 NACRES: JA.14 General descriptionQ-Gard® TL polishing cartridge is a replacement cartridge designed to remove ionic and organic contaminants down to trace levels, when fed with pure water. The cartridge is constructed with clean and high-purity materials to minimize the leaching of extractable contaminants. Q-Gard® TL polishing cartridge can be used with Elix® Gulfstream / Large and RiOs™ Large water purification systems.ApplicationThis polishing cartridge retains both ions and organics.
Features and Benefits- Genuine consumable for the replacement of Q-Gard® – QGARDTL01 polishing cartridge.
- Generates ionic and organic contaminant free water by ion exchange, activated carbon, and depth filtration technologies.
Components
Virgin ion-exchange resins for deionizationLegal InformationELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-GARD is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыТорговая марка Q-Gard® capacity 43 g/L ion exchange capacity (NaCl) compatibility for use with Elix®, for use with Elix® Gulfstream, for use with Elix® Large, for use with RiOs™ Large, for use with RiOs™ shipped in ambient Узнать цену -
Q-Gard® Purification Cartridge CP2ALLREST
eCl@ss: 33050190 NACRES: JA.14 General descriptionQ-Gard® A Cartridge is a polishing cartridge with virgin ion-exchange resins for use with AFS® 8/16, AFS® 8D/16D and AFS® Essential systems. This cartridge is designed to produce high resistivity water from purification media carefully selected .ApplicationThe Q-Gard® A Cartridge is designed to remove ionic contaminants below trace level to match the water quality required for your applications.
Features and Benefits- Guarantee water quality.
- Ensure compliance with system specifications.
- Employs ion-exchange technology for water purification.
- e-Sure tag RFID technology for safety and automatic pack parameters archiving.
Legal InformationAFS is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-GARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыfeature Guarantee water quality; Virgin ion-exchange resins for ion removal; Ensure compliance with system specifications Торговая марка Q-Gard® application(s) ion chromatography: suitable compatibility for use with AFS® shipped in ambient Узнать цену -
Q-Gard® Purification Cartridge QGARDT3X1
eCl@ss: 33050190 NACRES: JA.14 General descriptionQ-Gard® T3 Purification Cartridge is designed to remove the ionic and organic contaminants down to trace levels from DI water feed containing high silt.
The cartridge is constructed with clean and high-purity materials to minimize the leaching of extractable contaminants.ApplicationQ-Gard® T3 Purification Cartridge can be used with Milli-Q® Advantage A10 / Reference systems.
Features and Benefits- Genuine consumable for the replacement of Q-Gard® QGARDT3X1 cartridge filter.
- Generates ionic and organic contaminant-free water by ion exchange, activated carbon, and depth filtration technologies.
Legal InformationMilli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-GARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial polypropylene and polyethylene feature can remove contaminants from various feed water types Торговая марка Q-Gard® H x L x W 360 mm x 500 mm x 332 mm capacity 26 g/L ion exchange capacity (NaCl) compatibility for use with Milli-Q® Advantage A10, for use with Milli-Q® Reference shipped in ambient Узнать цену -
Q-Gard® Purification Cartridge QGARD00B1
eCl@ss: 33050190 NACRES: JA.14 General descriptionQ-Gard® Boron Purification Cartridge is a water purification consumable, designed to remove traces of boron from ultrapure water delivered by Milli-Q® systems.ApplicationQ-Gard® Boron Purification Cartridge is recommended for use in laboratory applications where boron levels need to be reliably low, such as ICP-MS.
Features and Benefits- Genuine consumable for replacing the QGARD00B1 Q-Gard® cartridge filter.
- Removes traces of boron from feed water by ion exchange principle.
- Generates boron-free water when fed by Elix® reverse osmosis, deionized, and distilled water.
Legal InformationELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-GARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыТорговая марка Q-Gard® application(s) ion chromatography: suitable volume 1.2 L , Resin pore size 0.1 µm pore size capacity 48 total capacity compatibility for use with Milli-Q® Academic, for use with Milli-Q® Biocel, for use with Milli-Q® Element, for use with Milli-Q® Gradient, for use with Milli-Q® Synthesis shipped in ambient Узнать цену -
Q-Gard® Purification Cartridge CP2ALLRES
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe Q-Gard® A Cartridge is a polishing cartridge with virgin ion-exchange resins for use with AFS® 8/16 and AFS® 8D/16D water purification systems. This cartridge is designed to produce high resistivity water using carefully selected purification media.ApplicationQ-Gard® A Cartridge is designed to remove ionic contaminants below trace level to match the water quality required for your application.
Features and Benefits- Guarantee water quality.
- Ensure compliance with system specifications.
- Employs ion-exchange technology for water purification.
Components
Virgin ion-exchange resins for ion removalLegal InformationAFS is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-GARD is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыТорговая марка AFS® application(s) ion chromatography: suitable compatibility for use with AFS® shipped in ambient Узнать цену -
QPAK® Purification Cartridge QPAK00TEX
eCl@ss: 33050190 NACRES: JA.14 General descriptionQPAK® TEX Polishing Cartridge is designed to remove ionic and organic contaminants down to trace levels, when fed with purified water. The cartridge is constructed with clean and high-purity materials to minimize leaching of extractable contaminants. For use with Milli-Q® Direct systems.ApplicationRemoves ionic and organic contaminants down to trace levels.Features and Benefits- Genuine consumable for the replacement of QPAK® – QPAK00TEX cartridge filter.
- e-Sure radio-frequency identification (RFID) tag ensures full traceability and provides instant visibility on pack parameters.
- Uses organex and ion-exchange resins.
- Certificate of Quality available online.
Legal InformationMilli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
QPAK is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыТорговая марка QPAK® resistivity >18.0 M-cm (at 25 degree celcius) application(s) ion chromatography: suitable total organic carbon (TOC) residue <10 ppb compatibility for use with Milli-Q® Direct shipped in ambient Узнать цену -
QPAK® Purification Cartridge QPAK00TIX
eCl@ss: 33050190 NACRES: JA.14 General descriptionQPAK® TIX Polishing Cartridge is designed to remove ionic contaminants down to trace levels, when fed with RO purified water. The cartridge is constructed with clean and high-purity materials to minimize the leaching of extractable contaminants. QPAK® TIX Polishing Cartridge can be used with Milli-Q® Direct systems.ApplicationRemoves ionic contaminants down to trace levels.
Features and Benefits- Genuine consumable for the replacement of QPAK® – QPAK00TIX cartridge filter.
- e-Sure radio-frequency identification (RFID) tag ensures full traceability and provides instant visibility on pack parameters.
- Certificate of Quality available online.
- Employs Ion-exchange resin for trace level removal of ions.
Legal InformationMilli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
QPAK is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial polypropylene and polyethylene Торговая марка QPAK® resistivity >18.0 M-cm (at 25 °C) application(s) ion chromatography: suitable total organic carbon (TOC) residue <10 ppb compatibility for use with Milli-Q® Direct shipped in ambient Узнать цену -
QPAK® Purification Cartridge CPMQ004R1
eCl@ss: 33050190 General descriptionFor Milli-Q systems with RO or distilled water feedLegal InformationMilli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
QPAK is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыТорговая марка QPAK® resistivity >18.0 M-cm (at 25 degree celcius) total organic carbon (TOC) residue <10 ppb capacity 143 g ion exchange capacity (NaCl)(Dynamic Capcity is greater than 92g NaCl) compatibility for use with Milli-Q® Plus (1989-1996) shipped in ambient Узнать цену -
Quantum® Polishing Cartridge QTUM0TEX1
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe Quantum® TEX Polishing Cartridge contains a combination of purification media designed to remove trace levels of organics and ions from ultrapure feed water affecting specific applications. Constructed from polypropylene and polyethylene, which are suitable for the production of ultrapure water. Comprises clean and high-purity materials to minimize leaching of low organics and extractable contaminants. Quantum® TEX Polishing Cartridge can be used with Milli-Q® Advantage A10 / Integral / Reference systems.ApplicationThis polishing cartridge retains both ions and organics, and is recommended for most laboratory needs.Features and Benefits- Genuine Milli-Q® consumable for the replacement of QTUM0TEX1 - Quantum® TEX Polishing Cartridge.
- Care-free maintenance: easily installed and replaced.
- e-Sure tag for RFID connection enables full traceability (data management).
- Contains Organex (mix of synthetic activated carbon & virgin ion exchange resins).
- Uses ion exchange technology for purification.
- Certificate of Quality available online.
Components- Organex (Mix of Synthetic activated carbon & virgin Ion exchange resins)
- Virgin Ion Exchange Resins
Legal InformationMilli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
QUANTUM is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыfeature can remove trace levels of organics and ions from Ultrapure water Торговая марка Quantum® resistivity >18.0 M-cm (at 25 degree celcius) total organic carbon (TOC) residue <5 ppb capacity 33 g ion exchange capacity (NaCl)(Dynamic Capcity is greater than 8g NaCl) compatibility for use with Milli-Q® Advantage A10, for use with Milli-Q® Integral, for use with Milli-Q® Reference shipped in ambient Узнать цену -
Quantum® Polishing Cartridge QTUM0TIX1
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe Quantum® TIX Polishing Cartridge contains purification media designed to remove trace levels of ions from ultrapure feed water affecting specific applications. Constructed from polypropylene and polyethylene, which are suitable for the production of ultrapure water. Comprises clean and high-purity materials to minimize leaching of low organics and extractable contaminants. Quantum® TIX Polishing Cartridge can be used with Milli-Q® Advantage A10 / Integral / Reference systems.ApplicationThis polishing cartridge contains ion exchange resins for removal of trace ions, and is recommended for any laboratory work requiring very low levels of ions.
Features and Benefits- Genuine Milli-Q® consumable for the replacement of QTUM0TIX1 - Quantum® TIX Polishing Cartridge.
- Contains Ionex resins for trace ion removal.
- Care-free maintenance: easily installed and replaced.
- e-Sure tag for RFID connection enables full traceability (data management).
- Uses ion exchange technology for purification.
- Certificate of Quality available online.
Components- Organex (Mix of Synthetic activated carbon & virgin Ion exchange resins)
- Virgin Ion Exchange Resins
Legal InformationMilli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
QUANTUM is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыfeature Removes trace levels of organics and ions from ultrapure water Торговая марка Quantum® resistivity >18.0 M-cm (at 25 degree celcius) total organic carbon (TOC) residue <10 ppb capacity 40 g ion exchange capacity (NaCl)(Dynamic Capcity is greater than 20g NaCl) compatibility for use with Milli-Q® Advantage A10, for use with Milli-Q® Integral, for use with Milli-Q® Reference shipped in ambient Узнать цену -
Quantum® Polishing Cartridge QTUM00ICP
eCl@ss: 33050190 NACRES: JA.14 General descriptionQuantum® ICP Polishing Cartridge is validated to achieve water quality suitable for trace elemental analysis (ppt or sub-ppt) from an ultrapure water feed. The compact device provides efficient and convenient access to freshly purified ultrapure water from the Milli-Q® Element (2001-2009) and Q-POD® Element systems. The cartridge is constructed with clean and high-purity materials to minimize leaching of extractable contaminants. Quantum® ICP Polishing Cartridge for use with Milli-Q® Element (2001-2009) and Q-POD® Element systems.ApplicationThis polishing cartridge is specifically designed for trace- and ultra-trace elemental analysis (ICP-MS, GF-AAS, IC).
Features and Benefits- Genuine Milli-Q® consumable for the replacement of QTUM00ICP - Quantum® ICP Polishing Cartridge.
- Dedicated to trace elemental analysis (ppt or sub-ppt).
- Certificate of Quality available online.
Legal InformationMilli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-POD is a registered trademark of Merck KGaA, Darmstadt, Germany
QPOD is a trademark of Millipore Corporation
QUANTUM is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial polypropylene and polyethylene feature can remove trace levels of organics and ions from Ultrapure water Торговая марка Quantum® resistivity >18.0 M-cm (at 25 degree celcius) total organic carbon (TOC) residue <10 ppb capacity 36 g ion exchange capacity (NaCl)(Dynamic Capcity is greater than 21 g NaCl) compatibility for use with Milli-Q® Element, for use with Q-POD™ Element shipped in ambient Узнать цену -
Quantum® Polishing Cartridge QTUM000IX
eCl@ss: 33050190 NACRES: JA.14 General descriptionQuantum® IX Polishing Cartridge removes ionic contaminants down to trace levels to match the water quality required for your applications. The cartridge is constructed with clean and high-purity materials to minimize leaching of extractable contaminants.Quantum® IX Polishing Cartridge for use with Direct-Q® and Milli-Q® Academic / Biocel / Gradient / Synthesis systems.ApplicationThis polishing cartridge retains both ions and organics, and is recommended for most laboratory needs.
Features and Benefits- Genuine replacement Milli-Q® water purification consumable.
- Certificate of Quality available online.
Legal InformationDIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
QUANTUM is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial polypropylene and polyethylene feature can remove trace levels of organics and ions from ultrapure water Торговая марка Quantum® resistivity >18.0 M-cm (at 25 °C) total organic carbon (TOC) residue <10 ppb capacity 36 g ion exchange capacity (NaCl)(Dynamic Capcity is greater than 21 g NaCl) compatibility for use with Direct-Q®, for use with Milli-Q® Academic, for use with Milli-Q® Biocel, for use with Milli-Q® Gradient, for use with Milli-Q® Synthesis shipped in ambient Узнать цену -
Quantum® Polishing Cartridge QTUM000VX
eCl@ss: 33050190 NACRES: JA.14 General descriptionQuantum® VX Polishing Cartridge is designed to remove the ionic and organic contaminants down to trace levels to match the water quality required for your application. The cartridge is constructed with clean and high-purity materials to minimize the leaching of extractable contaminants.ApplicationThis polishing cartridge is recommended for situations where volatile organics must be kept at a very low level (for GC-MS analyses, etc.)
Features and Benefits- Genuine consumable for the replacement of QTUM000VX - Quantum® VX Polishing Cartridge.
- Utilizes volatile organex resin to remove trace levels of volatile organics.
- Generates ionic and volatile organic contaminant free water by ion exchange and activated carbon technologies.
- Certificate of Quality available online.
Legal InformationDIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
QUANTUM is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial polypropylene and polyethylene description Remove trace contaminants affecting specific applications. feature production of ultrapure water and have been qualified for low organics and ionic extractables Торговая марка Quantum® resistivity >18.0 M-cm (at 25 °C) total organic carbon (TOC) residue <5 ppb capacity 27 g ion exchange capacity (NaCl)(Dynamic Capcity is greater than 10g NaCl) compatibility for use with Direct-Q®, for use with Milli-Q® Academic, for use with Milli-Q® Biocel, for use with Milli-Q® Gradient, for use with Milli-Q® Synthesis shipped in ambient Узнать цену -
Quantum® Polishing Cartridge QTUM000EX
General descriptionThe Quantum® Pack has been designed to remove trace levels of organics and ions from ultrapure water. It is made of Organex (mix of synthetic activated carbon & virgin ion-exchange resins) and virgin ion-exchange resins.
Quantum® EX polishing cartridges can be used with Milli-Q® Biocel / Academic / Gradient / Synthesis systems.ApplicationFor Milli-Q® systems. Contains Organex & Ionex Resins for trace levels of organics and ions.
Features and Benefits- Contains Organex and Ionex resins to remove trace organic and ionic contaminants.
- Care-free maintenance: easily installed and replaced.
- Uses ion exchange technology for purification.
- Should be replaced every 6 months.
- Certificate of Quality available online.
Components- Organex (Mix of Synthetic activated carbon & virgin Ion exchange resins).
- Virgin Ion Exchange Resins.
Legal InformationMilli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
QUANTUM is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыfeature (removes trace levels of organics and ions from ultrapure water) packaging pkg of 1 unit compatibility for use with Milli-Q® Academic, for use with Milli-Q® Biocel, for use with Milli-Q® Gradient, for use with Milli-Q® Synthesis shipped in ambient Узнать цену -
ROCare
eCl@ss: 33050190 NACRES: JA.14
Кат. номер ZWBASE012 NACLZWBASE012/12 General descriptionROCare B is a lab water purification consumable that ensures the systems lifetime and performance by effectively removing some or most organic material buildup on the surface of the reverse osmosis (RO) membranes.
The base cleaner is delivered in a pouch and the empty pouch is removed after use. It is periodically used when prompted by the system or when the RO % rejection drops more than 5% or when the RO permeate flow rate drops more than 10% due to organic fouling.ApplicationROCare B base cleaning pouches protect RO membranes that support Elix® Advantage, Milli-Q® HR 7000, Milli-Q® HX 7000 and Milli-Q® IX 7003/05/10/15 water purification systems.
Features and Benefits- Anti-fouling agent
- pH 10 in an aqueous solution
- Contains 12 packages
Legal InformationELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыfeature removes fouling contaminants from RO membranes compatibility for use with Elix® Advantage, for use with Milli-Q® HR, for use with Milli-Q® HX, for use with Milli-Q® IX 7003, for use with Milli-Q® IX 7005, for use with Milli-Q® IX 7010, for use with Milli-Q® IX 7015 shipped in ambient
Safety Informationpictograms GHS07,GHS08 signalword Warning hcodes H315 - H319 - H335 - H373 pcodes P260 - P264 - P271 - P302 + P352 - P305 + P351 + P338 - P314 Target Organs Respiratory system, Respiratory Tract WGK Germany WGK 2 Узнать цену -
Rogard II Prefilter
eCl@ss: 33050190 NACRES: JA.14
Кат. номер CDPRM1206 NACLCDPRM1206/6 General descriptionThe Rogard II Prefilter, with melt blown polypropylene, 5.0 µm, pretreats water by removing large particles from tap feed water. This protects the reverse osmosis (RO) membrane against fouling and chlorine oxidation.
For use with Milli-Q® and Milli-RO™ bowl-style water purification systems.ApplicationRogard II Prefilter is used for optimal protection of the RO membrane.
Features and Benefits- Optimal protection of reverse osmosis (RO) membrane.
- Ensures optimized system lifetime and performance.
- Employs depth filtration purification technology.
Legal InformationMILLI-RO is a trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial polypropylene (Melt blown) feature removes large particles from tap water H 30 cm (12 in.) pore size 5.0 μm pore size shipped in ambient Узнать цену -
Rogard II Prefilter CDPRM2606
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe Rogard Prefilter is designed to pretreat water by removing large particles, organic compounds and free chlorine from tap water. This protects the reverse osmosis (RO) membrane against organic fouling and chlorine oxidation.ApplicationRogard II Prefilter 66 cm (26") is used with Milli-Q® and Milli-RO™ bowl-style systems mainly in applications such as pharmaceutical products analysis, and environmental testing.
Features and Benefits- Optimal protection of reverse osmosis (RO) membrane.
- Ensures optimized system lifetime and performance.
- Employs depth filtration purification technology.
Legal InformationMILLI-RO is a trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial polypropylene (Melt blown) feature removes large particles from tap water H 66 cm (26 in.) pore size 5.0 μm pore size shipped in ambient Узнать цену -
ROProtect C ZWCL01F50
General descriptionROProtect C chlorine tablets are an ideal and convenient solution to sanitize and protect reverse osmosis membranes.Legal InformationAFS is a registered trademark of Merck KGaA, Darmstadt, Germany
ELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
RIOS is a trademark of Millipore CorporationПараметрыfeature Sanitize and protects reverse osmosis membrane composition (mixture of triclosene sodium dihydrate, sodium carbonate and adipic acid) compatibility for use with AFS®, for use with Elix® Advantage, for use with Elix® Essential UV, for use with Elix® Essential, for use with Elix® Reference, for use with Milli-Q® HR, for use with Milli-Q® HX, for use with Milli-Q® IX 7003, for use with Milli-Q® IX 7005, for use with Milli-Q® IX 7010, for use with Milli-Q® IX 7015, for use with Milli-Q® Direct, for use with Milli-Q® IQ 7003, for use with Milli-Q® IQ 7005, for use with Milli-Q® IQ 7010, for use with Milli-Q® IQ 7015, for use with RiOs™ Essential
Safety Informationpictograms GHS07,GHS09 signalword Warning hcodes H319 - H335 - H410 pcodes P261 - P264 - P271 - P273 - P280 - P305 + P351 + P338 Target Organs Respiratory system Supp Hazards EUH031 WGK Germany WGK 2 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
- 0.05 m Final Filter SIMFILTER
eCl@ss: 33050190 NACRES: JA.14 General descriptionSimfilter is the final filter used to perform final filtration of dispensed water by removing particles greater than 0.05 µm. Simfilter - 0.05 µm Final Filter can be used with Simplicity® water purification systems.ApplicationThe Simfilter, when placed at the outlet of a Simplicity® water system, delivers water suited for any laboratory use where bacteria and/or particles must be kept low.
Features and Benefits
Genuine consumable for the replacement of SIMFILTER - Simfilter - 0.05 μm Final Filter.Legal InformationSIMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыpore size 0.05 µm pore size compatibility for use with Simplicity® UV, for use with Simplicity® shipped in ambient Узнать цену -
SimpliPak® Purification Cartridge SIPK0SIA1
eCl@ss: 33050190 NACRES: JA.14 General description- SimpliPak® 1 Purification Cartridge is designed to remove ionic and organic contaminates down to trace levels when fed with Elix® / RO / distilled water feed.
- The cartridge is constructed with clean and high-purity materials to minimize the leaching of extractable contaminants.
ApplicationRemoves ionic and organic contaminants down to trace levels.
Features and Benefits- Genuine consumable for the replacement of SIPK0SIA1 - SimpliPak® 1 Purification Cartridge.
- Care-free maintenance: easily installed and replaced.
- Generates ionic and organic contaminant-free water by ion exchange, and activated carbon technologies.
- Certificate of Quality available online.
Legal InformationELIX is a registered trademark of Merck KGaA, Darmstadt, Germany
SIMPLICITY is a registered trademark of Merck KGaA, Darmstadt, Germany
SIMPLIPAK is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыfeature can remove trace contaminants Торговая марка SimpliPak® resistivity >18.0 M-cm (at 25 °C) pore size 0.05 µm pore size compatibility for use with Simplicity® UV, for use with Simplicity® shipped in ambient Узнать цену -
SimpliPak® Purification Cartridge SIPK0SIX2
eCl@ss: 33050190 NACRES: JA.14 General descriptionSimpliPak® 2 Purification Cartridge is designed to remove ionic and organic contaminates down to trace levels from DI water feed. The cartridge is constructed with clean and high-purity materials to minimize the leaching of extractable contaminants.ApplicationSimpliPak® 2 Purification Cartridge can be used with Simplicity® water purification systems.
Features and Benefits- Genuine consumable for the replacement of SIPK0SIX2 - SimpliPak® 2 Purification Cartridge.
- Care-free maintenance: easily installed and replaced.
- Generates ionic and organic contaminant-free water by ion exchange and activated carbon technologies
Legal InformationSIMPLICITY is a registered trademark of Merck KGaA, Darmstadt, Germany
SIMPLIPAK is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial resin (Electronic Grade Ion-Exchange Resin) feature can remove trace contaminants Торговая марка SimpliPak® resistivity >18.0 M-cm (at 25 °C) compatibility for use with Simplicity® UV, for use with Simplicity® shipped in ambient Узнать цену -
SmartPak® Purification Pack SPR00SIA1
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe SmartPak® DQ3 purification pack contains a combination of selective purification media to produce ultrapure water directly from tap water. The SmartPak® DQ3 is an all-in-one twin cartridge removes trace impurities from tap water. The first cartridge combines pretreatment media and a reverse osmosis (RO) membrane. The second cartridge contains ion-exchange resins. This pack also contains exclusive Jetpore®, ultrapure grade mixed-bed ion-exchange resin to produce pure and ultrapure water directly from tap water. The SmartPak® needs to be periodically replaced during maintenance of the system. For use with Direct-Q® 3 water purification systems.ApplicationThis all-in-one pack removes a wide variety of water contaminants (organics, ions, particles...).Features and Benefits- Genuine consumable for the replacement of SmartPak® DQ3 Purification Pack LT.
- Pretreatment (activated carbon and depth filter).
- Reverse osmosis cartridge.
- Synthetic activated carbon.
- Virgin ion-exchange resins.
Legal InformationDIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
JETPORE is a registered trademark of Merck KGaA, Darmstadt, Germany
SMARTPAK is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыfeature A unique purification pak to produce ultrapure water directly from tap water Торговая марка SmartPak® parameter >0.5 L/min flow rate compatibility for use with Direct-Q® UV, for use with Direct-Q® shipped in ambient Узнать цену -
SmartPak® Purification Pack SPR0LSIA1
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe SmartPak® DQ3 Purification Pack LT contains a combination of selective purification media to produce Type 3 pure and Type 1 ultrapure water directly from tap water.
The SmartPak® DQ3 is an all-in-one twin cartridge removes trace impurities from tap water. The first cartridge combines pretreatment media and a reverse osmosis (RO) membrane. The second cartridge contains ion-exchange resins.
This pack contains exclusive Jetpore®, ultrapure grade mixed-bed ion-exchange resin to produce pure and ultrapure water directly from tap water.
The SmartPak® needs to be periodically replaced during maintenance of the system.
For use with Direct-Q® water purification systems with low (<15 °C) feed water temperature.ApplicationThis pack removes a variety of water contaminants (ions, organics, particles...).
Features and Benefits- Pretreatment (activated carbon and depth filter).
- Reverse osmosis cartridge.
- Synthetic activated carbon.
- Virgin ion exchange resins.
- Care-free maintenance: easily installed and replaced.
- Certificate of Quality available online.
Legal InformationDIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
JETPORE is a registered trademark of Merck KGaA, Darmstadt, Germany
SMARTPAK is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыfeature Produces ultrapure water directly from tap water Торговая марка SmartPak® resistivity >18.0 M-cm (at 25 degree celcius) compatibility for use with Direct-Q® UV, for use with Direct-Q® shipped in ambient Узнать цену -
SmartPak® Purification Pack SPR08SIA1
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe SmartPak® DQ8 purification pack contains a combination of selective purification media to produce pure and ultrapure water directly from tap water. The SmartPak® DQ3 is an all-in-one twin cartridge removes trace impurities from tap water. The first cartridge combines pretreatment media and a reverse osmosis (RO) membrane. The second cartridge contains ion-exchange resins. This pack also contains exclusive Jetpore®, ultrapure grade mixed-bed ion-exchange resin to produce pure and ultrapure water directly from tap water. The SmartPak® needs to be periodically replaced during maintenance of the system. For use with Direct-Q® 8 Systems.ApplicationThis pack removes a wide variety of contaminants (organics, ions, particles...)
Features and Benefits- Genuine consumable for the replacement of SPR08SIA1 SmartPak® DQ8 Purification Pack.
- Reliable and affordable ultrapure water solution.
- Pretreatment (activated carbon and depth filter).
- Reverse osmosis cartridge.
- Synthetic activated carbon.
- Virgin ion-exchange resins.
- Certificate of Quality available online.
Legal InformationDIRECT-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
JETPORE is a registered trademark of Merck KGaA, Darmstadt, Germany
SMARTPAK is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыТорговая марка SmartPak® resistivity >18.0 M-cm (at 25 °C) pore size 180 µm pore size compatibility for use with Direct-Q® UV, for use with Direct-Q® shipped in ambient Узнать цену -
SmartPak® Purification Pack SPR00SIA2
eCl@ss: 33050190 NACRES: JA.14 General descriptionThe SmartPak® RODI Purification Pack combines the purifications steps of reverse osmosis and ion exchange to produce type 2 pure water.
For use with RiOs-DI® water purification systems.ApplicationThis pack removes a wide variety of contaminants (organics, ions, particles...).
Features and Benefits- Genuine consumable for the replacement of SPR00SIA2 - SmartPak® Purification Pack.
- Reliable and affordable type 2 pure water solution.
- Care-free maintenance: easily installed and replaced.
- Certificate of Quality available online.
Legal InformationRIOS-DI is a registered trademark of Merck KGaA, Darmstadt, Germany
SMARTPAK is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыfeature A unique purification pak to produce DI water directly from tap water Торговая марка SmartPak® resistivity >18.0 M-cm (at 25 °C) compatibility for use with RiOs-DI® UV, for use with RiOs-DI®, for use with RiOs-DI® Clinical shipped in ambient Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
