- Производитель:
- Milli-Q
eCl@ss: | 33050190 |
NACRES: | JA.14 |
VOCs are environmental contaminants causing health and safety issues that needs to be routinely analyzed in water, soil, gas and air samples. Specifications for VOCs in drinking water have been established by different regulatory agencies in many countries.
VOC-Pak® Polisher is, therefore, an excellent choice for scientists in need of VOC-free ultrapure water for their analytical applications.
VOC-free water is suitable for glassware rinsing, blanks, reagents, sample preparation, standard solutions or dilutions in the analysis of those substances, or in studies where VOCs may interfere. It is used in the development of nanoparticle sensors and nanoelectrodes.
Features and Benefits
- Validated to produce 300 L of VOC-free ultrapure water.
- Easy maintenance: the polisher is easily installed and replaced.
- Bottom-tip is redesigned for a secured installation of the protection bell.
- e-Sure tag for RFID connection with Q-POD® dispenser enables full traceability (data management) and automatic consumable status monitoring on the PODs touchscreen interface.
- Certificate of Quality available online.
- Provides a warranty of water suitable for VOC analysis: blanks and standards preparation; glassware cleaning; and sample dissolution (if VOCs are analyzed in a matrix other than water i.e., in soil).
Milli-Q is a registered trademark of Merck KGaA, Darmstadt, Germany
Q-POD is a registered trademark of Merck KGaA, Darmstadt, Germany
SIMPLICITY is a registered trademark of Merck KGaA, Darmstadt, Germany
SYNERGY is a registered trademark of Merck KGaA, Darmstadt, Germany
VOC-PAK is a registered trademark of Merck KGaA, Darmstadt, Germany
material | carbon (activated), polyethylene (Luer Plug), polyethylene connector, polypropylene housing |
description | Production of volatile organic compound-free ultrapure water at the point of dispense of the Direct-Q® / Simplicity® / Synergy® / Milli-Q® Direct and Reference systems |
Торговая марка | VOC-Pak® |
parameter | 2 bar pressure, 2.0 L/min flow rate, 5 °C temp. range (30 °C) |
resistivity | >18.0 M-cm (at 25 degree celcius) |
L | 12.7 cm |
impurities | <5 ppb TOC |
fitting | 1/4 in. inlet connection ( Gaz (straight) F connection and Luer F), 1/4 in. outlet connection (Gaz (straight) F connection and Luer F) |
compatibility | for use with Direct-Q® UV, for use with Direct-Q®, for use with Milli-Q® Direct, for use with Milli-Q® Reference, for use with Simplicity® UV, for use with Simplicity®, for use with Synergy® UV, for use with Synergy® |
shipped in | ambient |
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа

С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии

Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.

У большинства компаний срок ожидания составляет 10-12 недель.

Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.

Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.

В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.

Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.