Millex® Syringe Filters
- Сортировать:
- Вид таблицей
-
Millex-HV 0.45 for Samplicity G2 µm, PVDF, 33 mm, non-sterile SAMP2HVNB
eCl@ss: 32031690 General descriptionOverview of Millex® Filters for the Samplicity G2 System
• Samplicity G2 Filtration System enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials
• Millex Filters for the Samplicity G2 System provide adaptor funnels and Millex 33 mm filters
• Samplicity G2 System has lower ergonomic impact than manual syringe filtration
• Available in 0.20 µm and 0.45 µm pore sizes with Durapore PVDF, Millipore Express PLUS PES, or nylon membranes
Available in 2 Pack Sizes:
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 devices (4x 250 per pack)
Applications:
HPLC; Filtration of viscous or particulate laden samples for HPLC
Filter Code: HVPackaging250 ea in non sterile
non sterileApplicationDirect patient care: NoComponentsMillex Filter and easy fill funnelSpecificationsFor general laboratory use onlyPhysical formColor Code: YellowLegal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane, polypropylene , polypropylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume 80 µL (after air purge), hydrophilic Торговая марка Millex®, Samplicity® parameter 2 mL process volume (limited by vial volume), 45 °C max. temp., 8.6 bar max. inlet pressure (125 psi) application(s) sample preparation: suitable (analytical) filter diam. 33 mm filtration area 4.5 cm2 matrix Durapore® pore size 0.45 µm pore size input sample type aqueous solution(s)
sample type mild organic solution(s)bubble point 1.6 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient Узнать цену -
Millex-HV Syringe Filter Unit, 0.45 µm SLHV004SL
eCl@ss: 32031690 NACRES: NB.22 General descriptionFilter Code: HV
Available in 4, 13, 25, 33, and 50 mm diameters with a variety of membranes, Millex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.
Features & Benefits:
•Tailored to a variety of applications based on membrane type, housing and validation rating
•Medical Device-rated devices in some countries including vented devices for direct patient care
•Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
•Low extractables and low absorption membranes for minimum sample losses
•Faster flow rates and higher operating pressures for high performance needs
Applications:
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule Components, Select Medical Device Applications (Some Including Direct Patient Care Depending on Country/Region)ApplicationDirect patient care: NoPhysical formColor Code: Natural inlet/natural outletPreparation NoteSterilization Method
Ethylene oxideOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of user guide (packaged in box)
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationDurapore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane, high-density polyethylene housing Quality Level 400 sterility sterile; ethylene oxide treated product line Millex® feature holdup volume< 10 µL, hydrophilic Торговая марка Millex® availability available only in Canada, USA, Malaysia, Europe, Australia, Thailand, Japan parameter 1 mL process volume, 14 bar max. inlet pressure (200 psi), 45 °C max. temp. application(s) sterile filtration: suitable (sterilization of tissue culture media, protein solutions or aqueous solutions) H 19.7 mm diam. 0.4 cm filter diam. 4 mm filtration area 0.1 cm2 matrix Durapore® pore size 0.45 µm pore size input sample type induced pluripotent stem cell(s)
sample type hematopoietic stem cell(s)
sample type: human embryonic stem cell(s)
sample type epithelial cells
sample type mesenchymal stem cell(s)
sample type cardiac stem cell(s)
sample type pancreatic stem cell(s)
sample type neural stem cell(s)
sample type: mouse embryonic stem cell(s)test parameters sample volume: 1 mL fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet stepped slip shipped in ambient Узнать цену -
Millex-LCR for Samplicity G2, 0.45 µm, hydrophilic PTFE, 33 mm, non-sterile SAMP2LCRB
eCl@ss: 32031690 General descriptionSAMP2LCRB: 250 per pack
Overview of Millex® Filters for the Samplicity G2 System
• Samplicity G2 Filtration System enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials
• Millex Filters for the Samplicity G2 System provide adaptor funnels and Millex 33 mm filters
• Samplicity G2 System has lower ergonomic impact than manual syringe filtration
• Available in 0.20 µm and 0.45 µm pore sizes with hydrophilic PTFE, Durapore PVDF, Millipore Express PLUS PES, or nylon membranes
Applications:
HPLC; Filtration of viscous or particulate laden samples for HPLCPackaging250 ea in non sterileLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, polypropylene , polypropylene housing sterility non-sterile product line Millex® feature holdup volume 80 µL (after air purge), hydrophilic Торговая марка Millex®, Samplicity® parameter 2 mL process volume (limited by vial volume), 45 °C max. temp., 8.6 bar max. inlet pressure (125 psi) application(s) sample preparation: suitable (analytical) filter diam. 33 mm filtration area 4.5 cm2 pore size 0.45 µm pore size input sample type aqueous solution(s)
sample type organic solution(s)bubble point 2.9 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient 1 452,00 € / 142 500 ₽Получить предложение -
Millex-LG for Samplicity G2, 0.20 µm, hydrophilic PTFE, 33 mm, non-sterile SAMP2LGNB
eCl@ss: 32031690 General descriptionFilter Code: LG
SAMP2LGNB: 250 per pack
Overview of Millex® Filters for the Samplicity G2 System
• Samplicity G2 Filtration System enables vacuum driven filtration of up to 8 samples at once, directly into HPLC vials
• Millex Filters for the Samplicity G2 System provide adaptor funnels and Millex 33 mm filters
• Samplicity G2 System has lower ergonomic impact than manual syringe filtration
• Available in 0.20 µm and 0.45 µm pore sizes with hydrophilic PTFE, Durapore PVDF, Millipore Express PLUS PES, or nylon membranes
Applications:
HPLC; Filtration of viscous or particulate laden samples for HPLCPackaging250 ea in non sterile
non sterileApplicationDirect patient care: NoComponentsMillex Filter and easy fill funnelSpecificationsFor general laboratory use onlyPhysical formColor Code: Light BlueLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, Germany
SAMPLICITY is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, polypropylene , polypropylene housing sterility non-sterile product line Millex® feature holdup volume 80 µL (after air purge), hydrophilic Торговая марка Millex®, Samplicity® parameter 2 mL process volume (limited by vial volume), 45 °C max. temp., 8.6 bar max. inlet pressure (125 psi) application(s) sample preparation: suitable (analytical) filter diam. 33 mm filtration area 4.5 cm2 pore size 0.20 µm pore size input sample type aqueous solution(s)
sample type organic solution(s)bubble point 2.9 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient 1 452,00 € / 142 500 ₽Получить предложение -
Millex® 13mm PVDF .22um Sterile RUO SLGVR13SL
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationSterilization of tissue culture media, protein solutions or aqueous solutionsUltra-Low Protein Binding
A 13 mm diameter sterile syringe filter with a 0.22 μm pore size hydrophilic PVDF membrane. Comes in a pack of 100.Features and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane Quality Level 400 sterility ethylene oxide treated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 100 Торговая марка Millipore SLGVR13SL parameter 100 mL (Process Volume), 45 °C max. temp., 7 bar max. inlet pressure at 100 psi H 21 mm filter diam. 13 mm color natural matrix MF-Millipore® pore size 0.22 µm test parameters sample volume: 10 mL 550,50 € / 54 026 ₽Получить предложение -
Millex® 13mm PVDF .45um Sterile RUO SLHVR13SL
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationSterilization of tissue culture media, protein solutions or aqueous solutionsUltra-Low Protein Binding
A 13 mm diameter sterile syringe filter with a 0.45 μm pore size hydrophilic PVDF membrane. Comes in a pack of 100.Features and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane Quality Level 400 sterility ethylene oxide treated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 100 Торговая марка Millipore SLHVR13SL parameter 100 mL (Process Volume), 45 °C max. temp., 7 bar max. inlet pressure at 100 psi H 21 mm filter diam. 13 mm color natural matrix MF-Millipore® pore size 0.45 µm test parameters sample volume: 10 mL 550,50 € / 54 026 ₽Получить предложение -
Millex® 33mm MCE .22um Sterile 250/pk RUO SLGSR33SB
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationClarification of water, buffers or aqueous solutions
A 33 mm diameter sterile syringe filter with a 0.22 μm pore size Mixed Cellulose Esters membrane. Comes in a pack of 250.Features and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material mixed cellulose esters (MCE) membrane sterility ethylene oxide treated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 250 Торговая марка Millipore SLGSR33SB parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color blue pore size 0.22 µm test parameters sample volume: 100 mL
Safety InformationPictograms GHS02 Signal Word Danger Hazard Statements H228 Precautionary Statements P210 - P240 - P241 - P280 - P370 + P378 WGK Germany WGK 3 831,00 € / 81 555 ₽Получить предложение -
Millex® 33mm MCE .22um Sterile 50/pk RUO SLGSR33SS
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationClarification of water, buffers or aqueous solutions
A 33 mm diameter sterile syringe filter with a 0.22 μm pore size Mixed Cellulose Esters membrane.Features and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
This item is a direct replacement for SLGS033SS in countries where restricted.Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material mixed cellulose esters (MCE) membrane sterility ethylene oxide treated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 50 Торговая марка Millipore SLGSR33SS parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color blue pore size 0.22 µm test parameters sample volume: 100 mL
Safety InformationPictograms GHS02 Signal Word Danger Hazard Statements H228 Precautionary Statements P210 - P240 - P241 - P280 - P370 + P378 WGK Germany WGK 3 252,00 € / 24 731 ₽Получить предложение -
Millex® 33mm MCE .45um Sterile 250/pk RUO SLHAR33SB
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationA 33 mm diameter sterile syringe filter with a 0.45 μm pore size Mixed Cellulose Esters membrane. Comes in a pack of 250.
Clarification of water, buffers or aqueous solutionsFeatures and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material mixed cellulose esters (MCE) membrane sterility ethylene oxide treated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 250 Торговая марка Millipore SLHAR33SB parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color blue matrix MF-Millipore® pore size 0.45 µm test parameters sample volume: 100 mL 831,00 € / 81 555 ₽Получить предложение -
Millex® 33mm MCE .45um Sterile 50/pk RUO SLHAR33SS
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationClarification of water, buffers or aqueous solutions
A 33 mm diameter sterile syringe filter with a 0.45 μm pore size Mixed Cellulose Esters membrane. Comes in a pack of 50.Features and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material mixed cellulose esters (MCE) membrane sterility ethylene oxide treated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 50 Торговая марка Millipore SLHAR33SS parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color blue pore size 0.45 µm test parameters sample volume: 100 mL 252,00 € / 24 731 ₽Получить предложение -
Millex® 33mm MCE .8um Sterile 250/pk RUO SLAAR33SB
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationClarification of water, buffers or aqueous solutions
A 33 mm diameter sterile syringe filter with a 0.8 μm pore size Mixed Cellulose Esters membrane.Features and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material mixed cellulose esters (MCE) membrane sterility ethylene oxide treated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 250 Торговая марка Millipore SLAAR33SB parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color blue pore size 0.8 µm test parameters sample volume: 100 mL 831,00 € / 81 555 ₽Получить предложение -
Millex® 33mm MCE .8um Sterile 50/pk RUO SLAAR33SS
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationClarification of water, buffers or aqueous solutions
A 33 mm diameter sterile syringe filter with a 0.8 μm pore size Mixed Cellulose Esters membrane.Features and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material mixed cellulose esters (MCE) membrane sterility ethylene oxide treated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 50 Торговая марка Millipore SLAAR33SS parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color blue matrix MF-Millipore® pore size 0.8 µm test parameters sample volume: 100 mL 252,00 € / 24 731 ₽Получить предложение -
Millex® 33mm PES .22um Sterile 250/pk RUO SLGPR33RB
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationA 33 mm diameter sterile syringe filter with a 0.22 μm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 250
Sterilization of tissue culture media, protein solutions or aqueous solutionsLow Protein BindingFeatures and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material polyethersulfone membrane sterility -irradiated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 250 Торговая марка Millipore SLGPR33RB parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color green pore size 0.22 µm test parameters sample volume: 200 mL 864,24 € / 84 817 ₽Получить предложение -
Millex® 33mm PES .22um Sterile 50/pk RUO SLGPR33RS
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationSterilization of tissue culture media, protein solutions or aqueous solutionsLow Protein Binding
A 33 mm diameter sterile syringe filter with a 0.22 μm pore size hydrophilic Polyethersulfone (PES) membrane.Features and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material polyethersulfone membrane sterility -irradiated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 50 Торговая марка Millipore SLGPR33RS parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color green pore size 0.22 µm test parameters sample volume: 200 mL 252,00 € / 24 731 ₽Получить предложение -
Millex® 33mm PES .45m Sterile 50/pk RUO SLHPR33RS
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationSterilization of tissue culture media, protein solutions or aqueous solutionsLow Protein Binding
A 33 mm diameter sterile syringe filter with a 0.45 μm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 50Features and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material polyethersulfone membrane sterility -irradiated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 50 Торговая марка Millipore SLHPR33RS parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color green pore size 0.45 µm test parameters sample volume: 100 mL 252,00 € / 24 731 ₽Получить предложение -
Millex® 33mm PES .45um Sterile 250/pk RUO SLHPR33RB
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationA 33 mm diameter sterile syringe filter with a 0.45 μm pore size hydrophilic Polyethersulfone (PES) membrane. Comes in a pack of 250
Sterilization of tissue culture media, protein solutions or aqueous solutionsLow Protein BindingFeatures and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыQuality Level 400 material polyethersulfone membrane sterility -irradiated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 250 Торговая марка Millipore SLHPR33RB parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color green pore size 0.45 µm test parameters sample volume: 100 mL 831,00 € / 81 555 ₽Получить предложение -
Millex® 33mm PVDF .22um Sterile RUO SLGVR33RB
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationA 33 mm diameter sterile syringe filter with a 0.22 μm pore size hydrophilic PVDF membrane. Comes in a pack of 250.
Sterilization of tissue culture media, protein solutions or aqueous solutionsUltra-Low Protein BindingFeatures and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesThis item is a direct replacement for SLGV033RB in countries where restricted.
Directions for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane Quality Level 400 sterility -irradiated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 250 Торговая марка Millipore SLGVR33RB parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color yellow pore size 0.22 µm test parameters sample volume: 100 mL 831,00 € / 81 555 ₽Получить предложение -
Millex® 33mm PVDF .22um Sterile RUO SLGVR33RS
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationSterilization of tissue culture media, protein solutions or aqueous solutionsUltra-Low Protein Binding
A 33 mm diameter sterile syringe filter with a 0.22 μm pore size hydrophilic PVDF membrane. Comes in a pack of 50.Features and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane Quality Level 400 sterility -irradiated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 50 Торговая марка Millipore SLGVR33RS parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color yellow pore size 0.22 µm test parameters sample volume: 100 mL 252,00 € / 24 731 ₽Получить предложение -
Millex® 33mm PVDF .45um Sterile RUO SLHVR33RB
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationSterilization of tissue culture media, protein solutions or aqueous solutionsUltra-Low Protein Binding
A 33 mm diameter sterile syringe filter with a 0.45 μm pore size hydrophilic PVDF membrane. Comes in a pack of 250.Features and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesDirections for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane Quality Level 400 sterility -irradiated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 250 Торговая марка Millipore SLHVR33RB parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color yellow pore size 0.45 µm test parameters sample volume: 100 mL 864,24 € / 84 817 ₽Получить предложение -
Millex® 33mm PVDF .45um Sterile RUO SLHVR33RS
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationSterilization of tissue culture media, protein solutions or aqueous solutionsUltra-Low Protein Binding
A 33 mm diameter sterile syringe filter with a 0.45 μm pore size hydrophilic PVDF membrane. Comes in a pack of 50.Features and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesThis item is a direct replacement for SLHV033RS and SLHVM33RS in countries where restricted.
Directions for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane Quality Level 400 sterility -irradiated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 50 Торговая марка Millipore SLHVR33RS parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color yellow pore size 0.45 µm test parameters sample volume: 100 mL 252,00 € / 24 731 ₽Получить предложение -
Millex® 33mm PVDF 0.1um Sterile RUO SLVVR33RS
General descriptionMillex® sterile syringe filters are ideal for sterilizing organic solvents, aqueous solutions or air/gas. Many sample preparation methods specify Millex filters because of their unsurpassed quality and consistency. Millex filters not only feature minimal hold-up volume and faster flow rates, but they also withstand higher operating pressures and are chemically compatible with a range of samples and solvents to minimize leaching of extractable impurities. Millex filters are produced in a controlled, automated environment with the highest quality standards. Sterile devices come with a certificate of quality, with select devices marked for medical applications.ApplicationSterilization of tissue culture media, protein solutions or aqueous solutionsUltra-Low Protein Binding
A 33 mm diameter sterile syringe filter with a 0.1 μm pore size hydrophilic PVDF membrane. Comes in a pack of 50Features and BenefitsFeatures & Benefits:- Tailored to a variety of applications based on membrane type, housing and validation rating
- Specialized filter units to protect hemodialysis transducers from blood and moisture and for vacuum line protection
- Low extractables and low absorption membranes for minimum sample losses
- Faster flow rates and higher operating pressures for high performance needs
Sterilization of Aqueous Solutions, Organic Solvents and Gases, Filtration of High Value Protein or Small Molecule ComponentsOther NotesThis item is a direct replacement for SLVV033RS and SLVVM33RS in countries where restricted.
Directions for Use- Organism Retention: Microorganisms
- Mode of Action: Filtering
- Application: Sterile Filtration
- Intended Use: Sterilization of small volumes of aqueous solutions
- Instructions for Use: Please refer to Instructions for Use section of Millex® syringe filter user guide
- Storage Statement: Store in dry location
- Disposal Statement: Dispose of in accordance with applicable federal, state and local regulations.
Legal InformationMF-Millipore is a registered trademark of Merck KGaA, Darmstadt, Germany
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PVDF membrane Quality Level 400 sterility -irradiated, sterile feature hydrophilic, inlet/outlet Female Luer-Lok/Male Luer slip packaging pk of 50 Торговая марка Millipore SLVVR33RS parameter 10 bar max. inlet pressure at 145 psi, 100 mL (Process Volume), 45 °C max. temp. H 27 mm filter diam. 33 mm color yellow pore size 0.1 µm test parameters sample volume: 100 mL 252,00 € / 24 731 ₽Получить предложение -
MILLEX®-FG Syringe Filter
eCl@ss: 32031690 NACRES: NB.24
Кат. номер SLFG025NB SLFG025NS SLFG025NK General descriptionFilter Code: FG
Overview of Non-Sterile Millex® Syringe Filters with Hydrophobic Fluoropore (PTFE) Membrane:
• Ideal for filtering samples in organic solvents, and can also be used to prevent back-streaming of atmospheric moisture in venting applications.
• Broad chemical compatibility and excellent solvent resistance with organic solutions
• Available in 0.20 µm, 0.45 µm, and 5.0 µm pore sizes and three diameters to suit your application needs
• Housing is made from a low-extractable, high density polyethylene (HDPE) or polypropylene.
Available in Multiple Pack Sizes:
SKU ending with NS (-------NS): 50 per pack
SKU ending with NL (-------NL): 100 per pack
SKU ending with TL (-------TL): 100 per pack. These syringe filters have a tube outlet
SKU ending with NB (-------NB): 250 per pack
SKU ending with NK (-------NK): 1000 per pack
Applications:
Fine Particle Removal and Clarification of Organic Solutions, Vent Filtration, Sterilization of GasesPackaging50 pk in non sterile
1000 ea in non sterile
50 pk in non sterile
1000 ea in non sterile
250 ea in non sterileApplication0.20 µm pore size, 25 mm diameter, Millex-FG hydrophobic PTFE membraneSpecificationsFor general laboratory use onlyPhysical formColor Code: Natural inlet/natural outletLegal InformationFluoropore is a registered trademark of Merck KGaA, Darmstadt, Germany
Luer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, high-density polyethylene , high-density polyethylene housing Quality Level 400 sterility non-sterile product line Millex® feature holdup volume< 100 µL, hydrophobic Торговая марка Millex® parameter 100 mL process volume, 45 °C max. temp., 7 bar max. inlet pressure (100 psi) application(s) sample preparation: suitable (analytical) H 19.7 mm filter diam. 25 mm filtration area 3.9 cm2 matrix Fluoropore® pore size 0.2 µm pore size input sample type organic solution(s) fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip shipped in ambient от 69 372 до 439 670 ₽Получить предложение -
MILLEX®-LCR Syringe Filter
eCl@ss: 32031690
Кат. номер SLCR033NS SLCR033NB SLCR033NK General descriptionFilter Code: LCR
HPLC certified for low levels of UV absorbing extractables
SLCR033NS replaces SLCR025NS
SLCR033NB replaces SLCR025NB
SLCR033NK replaces SLCR025NKPackaging50 pk in non sterile
250, 1000 ea in non sterile
non sterileSpecificationsFor general laboratory use onlyPhysical formColor Code: Light BlueLegal InformationLuer-Lok is a registered trademark of Becton-Dickinson & Co.
Millex is a registered trademark of Merck KGaA, Darmstadt, GermanyПараметрыmaterial PTFE membrane, polypropylene , polypropylene housing sterility non-sterile product line Millex® feature holdup volume 80 µL (after air purge), hydrophilic Торговая марка Millex® parameter 100 mL process volume, 45 °C max. temp., 8.6 bar max. inlet pressure (125 psi) application(s) sample preparation: suitable (analytical) H 27 mm filter diam. 33 mm filtration area 4.5 cm2 pore size 0.45 µm pore size input sample type organic solution(s)
sample type aqueous solution(s)bubble point 1.6 bar, air with water at 23 °C fitting female Luer-Lok® inlet connection, female Luer-Lok® inlet fitting, male Luer outlet slip от 46 144 до 337 113 ₽Получить предложение
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
