MVP ICON® Surface Sampling Device 64003-100

The MVP ICON Surface Sampling Device is a self-contained device for use with the MVP ICON system for quality and HACCP-related monitoring of the environment. The MVP ICON system detects food and microbiological residues by measuring Adenosine triphosphate (ATP) using luciferase bioluminescence. ATP is found in most food residues and all bacteria, yeast and mold cells.
Increase Confidence in Your Results

• Superior swab design eliminates variation in operators collection technique, increasing reproducibility and providing assurance swab will be accurately and consistently measured each time.
• Light output of the reagent is measured, not the solid device surface, ensuring a high degree of repeatability.
• Reagent flows through hollow sampling device shaft to evenly wash ATP off sampling tip into bottom of the collection tube, ensuring a high degree of accuracy.
• Sampling devices feature one-hand, one-step activation freeing one hand for other operations.

Create More Flexibility in Your Schedule

• The swabs proprietary neutralizing buffer minimizes potential sanitizer interference so measurements can be taken before OR after sanitizing, letting you decide when it is most convenient to conduct your testing.
• Minimizes potential effect of commonly used sanitizers such as: Quat, Chlorine, and Peracetic Acid.
• Reduces false negative and false positive results caused by the quenching or amplification of sanitizers on competing swabs.

Convenient Storage

• Store sampling devices at room temperature – no refrigeration needed; saving precious refrigeration space for other necessities.

All test reagents are contained within the sampling device.
ATP Testing, Food Processing, HACCP Monitoring, Sanitation
The detection of ATP through bioluminescence is a well-established and widely used indicator of surface hygiene and cleaning efficacy in food processing. Visual inspection is not an adequate critical control for surface hygiene and the lengthy time-to-result of microbiological test methods (from 2 - 7 days) make them ineffective for hygiene monitoring. ATP detection with the MVP ICON provides results in 10 seconds allowing for immediate "go/no-go" decisions to be made prior to the start of processing and allows for correction actions, when necessary, to be taken immediately. ATP is a molecule that is found in all living cells, including: bacteria, yeast, mold and all organic matter. After cleaning and/or sanitizing, food processing equipment and the plant environment is tested for ATP. If cleaning/sanitizing has been effective, ATP levels should be low.
ATP Bioluminescence
Store at 2 to 30 °C (Protect from direct sunlight. Unused devices must be resealed in the foil bags.)
MVP ICON is a registered trademark of BioControl Systems, Inc.

packaging	pkg of 100 units (swabs; BC64003-100TST)
Торговая марка	BioControl Systems
storage condition	room temperature
application(s)	detection: suitable (ATP monitoring)
Featured Industry	Cosmetics Food and Beverages Industrial Hygiene (monitoring)
compatibility	for use with MVP ICON instrument
detection method	bioluminescent
storage temp.	room temp

pictograms	GHS07,GHS09
signalword	Warning
hcodes	H315 - H317 - H319 - H411
pcodes	P261 - P264 - P273 - P280 - P302 + P352 - P305 + P351 + P338
RIDADR	NONH for all modes of transport
Flash Point F	Not applicable
Flash Point C	Not applicable