GC Columns, Accessories & Adsorbents
- Сортировать:
- Вид таблицей
-
SLB®-5ms Capillary GC Column 28473-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method Standard Method 6040D, EN 2005/108/EC, EPA TO-13,IP-8,8270,525.2,608.1/608.2,608/8081/OLM04.2 PEST,610,625,8015,8082,8100,8141,8270,OLM04.2 SVOA, JMHLW, NIOSH 2530,5503, OSHA 62, meets requirements for USP G27 and G36 reg. compliance FDA LIB 4423 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 125 df 0.50 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Industrial Hygiene
Life Science and Biopharma
Personal Care
Petroleum
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену -
SLB®-5ms Capillary GC Column 28476-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method Standard Method 6040D, EN 2005/108/EC, EPA TO-13,IP-8,8270,525.2,608.1/608.2,608/8081/OLM04.2 PEST,610,625,8015,8082,8100,8141,8270,OLM04.2 SVOA, JMHLW, NIOSH 2530,5503, OSHA 62, meets requirements for USP G27 and G36 reg. compliance FDA LIB 4423 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 63 df 1.00 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Industrial Hygiene
Life Science and Biopharma
Personal Care
Petroleum
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену -
SLB®-5ms Capillary GC Column 28482-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method Standard Method 6040D, EN 2005/108/EC, EPA TO-13,IP-8,8270,525.2,608.1/608.2,608/8081/OLM04.2 PEST,610,625,8015,8082,8100,8141,8270,OLM04.2 SVOA, JMHLW, NIOSH 2530,5503, OSHA 62, meets requirements for USP G27 and G36 reg. compliance FDA LIB 4423 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 320 df 0.25 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 30 m x 0.32 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Industrial Hygiene
Life Science and Biopharma
Personal Care
Petroleum
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену -
SLB®-5ms Capillary GC Column 28484-U
eCl@ss: 32119290 General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica Agency/Method Standard Method 6040D, EN 2005/108/EC, EPA TO-13,IP-8,8270,525.2,608.1/608.2,608/8081/OLM04.2 PEST,610,625,8015,8082,8100,8141,8270,OLM04.2 SVOA, JMHLW, NIOSH 2530,5503, OSHA 62, meets requirements for USP G27 and G36 reg. compliance FDA LIB 4423 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 160 df 0.50 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 30 m x 0.32 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Industrial Hygiene
Life Science and Biopharma
Personal Care
Petroleum
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену -
SLB®-5ms Capillary GC Column 28559-U
eCl@ss: 32119290 General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica Agency/Method Standard Method 6040D, EN 2005/108/EC, EPA TO-13,IP-8,8270,525.2,608.1/608.2,608/8081/OLM04.2 PEST,610,625,8015,8082,8100,8141,8270,OLM04.2 SVOA, JMHLW, NIOSH 2530,5503, OSHA 62, meets requirements for USP G27 and G36 reg. compliance FDA LIB 4423 parameter -60-330 °C temperature (isothermal), -60-340 °C temperature (programmed) Beta value 132 df 1.00 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 30 m x 0.53 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Industrial Hygiene
Life Science and Biopharma
Personal Care
Petroleum
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену -
SLB®-5ms Intuvo Capillary GC Column 28564UINT
General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.18 µm application(s) gas chromatography (GC): suitable L x I.D. 20 m x 0.18 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase column type capillary non-polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-5ms Intuvo Capillary GC Column 28482UINT
General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.25 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.32 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase column type capillary non-polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-5ms Intuvo Capillary GC Column 28476UINT
General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 1.00 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase column type capillary non-polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-5ms Intuvo Capillary GC Column 28473UINT
General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.50 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase column type capillary non-polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-5ms Intuvo Capillary GC Column 28472UINT
General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.25 µm application(s) gas chromatography (GC): suitable L x I.D. 60 m x 0.25 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase column type capillary non-polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-5ms Intuvo Capillary GC Column 28471UINT
General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.25 µm application(s) gas chromatography (GC): suitable column L x I.D. 30 m x 0.25 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase column type capillary non-polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-5ms Intuvo Capillary GC Column 28469UINT
General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.25 µm application(s) gas chromatography (GC): suitable column L x I.D. 15 m x 0.25 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase column type capillary non-polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-IL100 Capillary GC Column 28884-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: Worlds first commercially available ionic liquid GC column. Serves as the benchmark of 100 on our GC column polarity scale. Selectivity almost identical to TCEP phase. Higher maximum temperature than TCEP columns (230 C compared to 140 C). Great choice for analysis of neutral and polarizable (contain double and/or triple C-C bonds) analytes. Launched in 2008.
USP Code: None
Phase:- Non-bonded
- 1,9-Di(3-vinylimidazolium)nonane bis(trifluoromethylsulfonyl)imide
- Subambient to 230 °C (isothermal or programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationASTM is a registered trademark of American Society for Testing and Materials
SLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method ASTM® D6526 parameter 25-230 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Non-bonded; 1,9-Di(3-vinylimidazolium)nonane bis(trifluoromethanesulfonyl)imide phase Featured Industry Chemicals and Industrial Polymers column type capillary highly polar
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system WGK Germany WGK 3 Flash Point F 230.0 °F Flash Point C > 110 °C Узнать цену -
SLB®-IL100 Capillary GC Column 28886-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: Worlds first commercially available ionic liquid GC column. Serves as the benchmark of 100 on our GC column polarity scale. Selectivity almost identical to TCEP phase. Higher maximum temperature than TCEP columns (230 C compared to 140 C). Great choice for analysis of neutral and polarizable (contain double and/or triple C-C bonds) analytes. Launched in 2008.
USP Code: None
Phase:- Non-bonded
- 1,9-Di(3-vinylimidazolium)nonane bis(trifluoromethylsulfonyl)imide
- Subambient to 230 °C (isothermal or programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationASTM is a registered trademark of American Society for Testing and Materials
SLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method ASTM® D6526 parameter 25-230 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 60 m x 0.25 mm matrix active group Non-bonded; 1,9-Di(3-vinylimidazolium)nonane bis(trifluoromethanesulfonyl)imide phase Featured Industry Chemicals and Industrial Polymers column type capillary highly polar
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system WGK Germany WGK 3 Flash Point F 230.0 °F Flash Point C > 110 °C Узнать цену -
SLB®-IL100 Capillary GC Column 28887-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: Worlds first commercially available ionic liquid GC column. Serves as the benchmark of 100 on our GC column polarity scale. Selectivity almost identical to TCEP phase. Higher maximum temperature than TCEP columns (230 C compared to 140 C). Great choice for analysis of neutral and polarizable (contain double and/or triple C-C bonds) analytes. Launched in 2008.
USP Code: None
Phase:- Non-bonded
- 1,9-Di(3-vinylimidazolium)nonane bis(trifluoromethylsulfonyl)imide
- Subambient to 230 °C (isothermal or programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationASTM is a registered trademark of American Society for Testing and Materials
SLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method ASTM® D6526 parameter 25-230 °C temperature (isothermal or programmed) Beta value 313 df 0.26 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.32 mm matrix active group Non-bonded; 1,9-Di(3-vinylimidazolium)nonane bis(trifluoromethanesulfonyl)imide phase Featured Industry Chemicals and Industrial Polymers column type capillary highly polar
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system WGK Germany WGK 3 Flash Point F 230.0 °F Flash Point C > 110 °C Узнать цену -
SLB®-IL111 Capillary GC Column 28927-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: Worlds first commercial column to rate over 100 on our GC column polarity scale. Selectivity most orthogonal to non-polar and intermediate polar phases, resulting in very unique elution patterns. Maximum temperature of 270 C is very impressive for such an extremely polar column. Great choice for separation of polarizable analytes (contain double and/or triple C-C bonds) from neutral analytes. Also a good GCxGC column choice. Launched in 2010.
USP Code: None
Phase:- Non-bonded
- 1,5-Di(2,3-dimethylimidazolium)pentane bis(trifluoromethylsulfonyl)imide
- 50 °C to 270 °C (isothermal or programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 50-270 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Non-bonded; 1,5-Di(2,3-dimethylimidazolium)pentane bis(trifluoromethanesulfonyl)imide phase Featured Industry Agriculture
Biofuels
Chemicals and Industrial Polymers
Clinical
Environmental
Food and Beverages
Petroleumcolumn type capillary extremely polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL111 Capillary GC Column 28928-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: Worlds first commercial column to rate over 100 on our GC column polarity scale. Selectivity most orthogonal to non-polar and intermediate polar phases, resulting in very unique elution patterns. Maximum temperature of 270 C is very impressive for such an extremely polar column. Great choice for separation of polarizable analytes (contain double and/or triple C-C bonds) from neutral analytes. Also a good GCxGC column choice. Launched in 2010.
USP Code: None
Phase:- Non-bonded
- 1,5-Di(2,3-dimethylimidazolium)pentane bis(trifluoromethylsulfonyl)imide
- 50 °C to 270 °C (isothermal or programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 50-270 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 60 m x 0.25 mm matrix active group Non-bonded; 1,5-Di(2,3-dimethylimidazolium)pentane bis(trifluoromethanesulfonyl)imide phase Featured Industry Agriculture
Biofuels
Chemicals and Industrial Polymers
Clinical
Environmental
Food and Beverages
Petroleumcolumn type capillary extremely polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL111 Capillary GC Column 29647-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: Worlds first commercial column to rate over 100 on our GC column polarity scale. Selectivity most orthogonal to non-polar and intermediate polar phases, resulting in very unique elution patterns. Maximum temperature of 270 C is very impressive for such an extremely polar column. Great choice for separation of polarizable analytes (contain double and/or triple C-C bonds) from neutral analytes. Also a good GCxGC column choice. Launched in 2010.
USP Code: None
Phase:- Non-bonded
- 1,5-Di(2,3-dimethylimidazolium)pentane bis(trifluoromethylsulfonyl)imide
- 50 °C to 270 °C (isothermal or programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 50-270 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 100 m x 0.25 mm matrix active group Non-bonded; 1,5-Di(2,3-dimethylimidazolium)pentane bis(trifluoromethanesulfonyl)imide phase Featured Industry Agriculture
Biofuels
Chemicals and Industrial Polymers
Clinical
Environmental
Food and Beverages
Petroleumcolumn type capillary extremely polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL111 Capillary GC Column 29689-U
NACRES: SB.54 General descriptionApplication: Worlds first commercial column to rate over 100 on our GC column polarity scale. Selectivity most orthogonal to non-polar and intermediate polar phases, resulting in very unique elution patterns. Maximum temperature of 270 C is very impressive for such an extremely polar column. Great choice for separation of polarizable analytes (contain double and/or triple C-C bonds) from neutral analytes. Also a good GCxGC column choice. Launched in 2010.
USP Code: None
Phase:- Non-bonded
- 1,5-Di(2,3-dimethylimidazolium)pentane bis(trifluoromethylsulfonyl)imide
- 50 °C to 270 °C (isothermal or programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 50-270 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 200 m x 0.25 mm matrix active group Non-bonded; 1,5-Di(2,3-dimethylimidazolium)pentane bis(trifluoromethanesulfonyl)imide phase Featured Industry Agriculture
Biofuels
Chemicals and Industrial Polymers
Clinical
Environmental
Food and Beverages
Petroleumcolumn type capillary extremely polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL111i Capillary GC Column 29883-U
NACRES: SB.54 General descriptionApplication: The selectivity of SLB-IL111i is most orthogonal to non-polar and intermediate polar phases, resulting in very unique elution patterns. Maximum temperature of 260 °C is very impressive for such an extremely polar column. Great choice for separation of polarizable analytes (contain double and/or triple C-C bonds) from neutral analytes. Also a good GCxGC column choice.
USP Code: None
Phase: Non-bonded; 1,5-di(2,3-dimethylimidazolium)pentane bis(trifluoromethanesulfonyl)imide
Temp. Limits: 50 °C to 260 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 50-260 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Non-bonded; 1,5-di(2,3-dimethylimidazolium)pentane bis(trifluoromethanesulfonyl)imide phase column type capillary extremely polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL111i Capillary GC Column 29884-U
NACRES: SB.54 General descriptionApplication: The selectivity of SLB-IL111i is most orthogonal to non-polar and intermediate polar phases, resulting in very unique elution patterns. Maximum temperature of 260 °C is very impressive for such an extremely polar column. Great choice for separation of polarizable analytes (contain double and/or triple C-C bonds) from neutral analytes. Also a good GCxGC column choice.
USP Code: None
Phase: Non-bonded; 1,5-di(2,3-dimethylimidazolium)pentane bis(trifluoromethanesulfonyl)imide
Temp. Limits: 50 °C to 260 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 50-260 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 60 m x 0.25 mm matrix active group Non-bonded; 1,5-di(2,3-dimethylimidazolium)pentane bis(trifluoromethanesulfonyl)imide phase Featured Industry Food and Beverages column type capillary extremely polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL111i Intuvo Capillary GC Column 29884UINT
General descriptionApplication: The selectivity of SLB-IL111i is most orthogonal to non-polar and intermediate polar phases, resulting in very unique elution patterns. Maximum temperature of 260 °C is very impressive for such an extremely polar column. Great choice for separation of polarizable analytes (contain double and/or triple C-C bonds) from neutral analytes. Also a good GCxGC column choice.
USP Code: None
Phase: Non-bonded; 1,5-di(2,3-dimethylimidazolium)pentane bis(trifluoromethanesulfonyl)imide
Temp. Limits: 50 °C to 260 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 60 m x 0.25 mm matrix active group Non-bonded; 1,5-di(2,3-dimethylimidazolium)pentane bis(trifluoromethanesulfonyl)imide phase column type capillary extremely polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-IL111i Intuvo Capillary GC Column 29883UINT
General descriptionApplication: The selectivity of SLB-IL111i is most orthogonal to non-polar and intermediate polar phases, resulting in very unique elution patterns. Maximum temperature of 260 °C is very impressive for such an extremely polar column. Great choice for separation of polarizable analytes (contain double and/or triple C-C bonds) from neutral analytes. Also a good GCxGC column choice.
USP Code: None
Phase: Non-bonded; 1,5-di(2,3-dimethylimidazolium)pentane bis(trifluoromethanesulfonyl)imide
Temp. Limits: 50 °C to 260 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Non-bonded; 1,5-di(2,3-dimethylimidazolium)pentane bis(trifluoromethanesulfonyl)imide phase column type capillary extremely polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-IL59 Capillary GC Column 28880-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: Selectivity more polar than PEG/wax phases, resulting in unique elution patterns. Higher maximum temperature than PEG/wax columns (300 C compared to 270-280 C). Great choice for analysis of neutral and moderately basic analytes. Launched in 2009.
USP Code: None
Phase:- Non-bonded
- 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethylsulfonyl)imide
- Subambient to 300 °C (isothermal or programmed)
Other NotesRelated products:
SyringesLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 25-300 °C temperature (isothermal or programmed) Beta value 313 df 0.08 µm application(s) gas chromatography (GC): suitable (fast GC) L x I.D. 15 m x 0.10 mm matrix active group Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Clinical
Environmental
Food and Beverages
Forensics and Toxicology
Petroleumcolumn type capillary polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL59 Capillary GC Column 28891-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: Selectivity more polar than PEG/wax phases, resulting in unique elution patterns. Higher maximum temperature than PEG/wax columns (300 C compared to 270-280 C). Great choice for analysis of neutral and moderately basic analytes. Launched in 2009.
USP Code: None
Phase:- Non-bonded
- 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethylsulfonyl)imide
- Subambient to 300 °C (isothermal or programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 25-300 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Clinical
Environmental
Food and Beverages
Forensics and Toxicology
Petroleumcolumn type capillary polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL60 Capillary GC Column 29503-U
NACRES: SB.54 General descriptionApplication: Modified (deactivated) version of SLB-IL59 provides better inertness. Selectivity more polar than PEG/wax phases, resulting in unique elution patterns. Higher maximum temperature than PEG/wax columns (300 C compared to 270-280 C). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice. Launched in 2012.
USP Code: None
Phase:- Non-bonded
- 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethylsulfonyl)imide
- 35 °C to 300 °C (isothermal or programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 35-300 °C temperature (isothermal or programmed) Beta value 313 df 0.08 µm application(s) gas chromatography (GC): suitable (fast GC) L x I.D. 15 m x 0.10 mm matrix active group Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase Featured Industry Agriculture
Biofuels
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Personal Care
Petroleumcolumn type capillary polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL60 Capillary GC Column 29504-U
NACRES: SB.54 General descriptionApplication: Modified (deactivated) version of SLB-IL59 provides better inertness. Selectivity more polar than PEG/wax phases, resulting in unique elution patterns. Higher maximum temperature than PEG/wax columns (300 C compared to 270-280 C). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice. Launched in 2012.
USP Code: None
Phase:- Non-bonded
- 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethylsulfonyl)imide
- 35 °C to 300 °C (isothermal or programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 35-300 °C temperature (isothermal or programmed) Beta value 313 df 0.14 µm application(s) gas chromatography (GC): suitable (fast GC) L x I.D. 20 m x 0.18 mm matrix active group Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase Featured Industry Agriculture
Biofuels
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Personal Care
Petroleumcolumn type capillary polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL60 Capillary GC Column 29505-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: Modified (deactivated) version of SLB-IL59 provides better inertness. Selectivity more polar than PEG/wax phases, resulting in unique elution patterns. Higher maximum temperature than PEG/wax columns (300 C compared to 270-280 C). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice. Launched in 2012.
USP Code: None
Phase:- Non-bonded
- 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethylsulfonyl)imide
- 35 °C to 300 °C (isothermal or programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 35-300 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase Featured Industry Agriculture
Biofuels
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Personal Care
Petroleumcolumn type capillary polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL60 Capillary GC Column 29506-U
NACRES: SB.54 General descriptionApplication: Modified (deactivated) version of SLB-IL59 provides better inertness. Selectivity more polar than PEG/wax phases, resulting in unique elution patterns. Higher maximum temperature than PEG/wax columns (300 C compared to 270-280 C). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice. Launched in 2012.
USP Code: None
Phase:- Non-bonded
- 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethylsulfonyl)imide
- 35 °C to 300 °C (isothermal or programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 35-300 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 60 m x 0.25 mm matrix active group Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase Featured Industry Agriculture
Biofuels
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Personal Care
Petroleumcolumn type capillary polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL60 Capillary GC Column 29508-U
NACRES: SB.54 General descriptionApplication: Modified (deactivated) version of SLB-IL59 provides better inertness. Selectivity more polar than PEG/wax phases, resulting in unique elution patterns. Higher maximum temperature than PEG/wax columns (300 C compared to 270-280 C). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice. Launched in 2012.
USP Code: None
Phase:- Non-bonded
- 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethylsulfonyl)imide
- 35 °C to 300 °C (isothermal or programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 35-300 °C temperature (isothermal or programmed) Beta value 313 df 0.26 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.32 mm matrix active group Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase Featured Industry Agriculture
Biofuels
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Personal Care
Petroleumcolumn type capillary polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL60 Capillary GC Column 29509-U
General descriptionApplication: Modified (deactivated) version of SLB-IL59 provides better inertness. Selectivity more polar than PEG/wax phases, resulting in unique elution patterns. Higher maximum temperature than PEG/wax columns (300 C compared to 270-280 C). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice. Launched in 2012.
USP Code: None
Phase:- Non-bonded
- 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethylsulfonyl)imide
- 35 °C to 300 °C (isothermal or programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica parameter 35-300 °C temperature (isothermal or programmed) Beta value 313 df 0.26 µm application(s) gas chromatography (GC): suitable L x I.D. 60 m x 0.32 mm matrix active group Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase Featured Industry Agriculture
Biofuels
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Personal Care
Petroleumcolumn type capillary polar Узнать цену -
SLB®-IL60 Intuvo Capillary GC Column 29505UINT
General descriptionApplication: Modified (deactivated) version of SLB-IL59 provides better inertness. Selectivity more polar than PEG/wax phases, resulting in unique elution patterns. Higher maximum temperature than PEG/wax columns (300 C compared to 270-280 C). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice. Launched in 2012.
USP Code: None
Phase:- Non-bonded
- 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethylsulfonyl)imide
- 35 °C to 300 °C (isothermal or programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase column type capillary polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-IL60i Capillary GC Column 29829-U
NACRES: SB.54 General descriptionApplication: The selectivity of SLB-IL60i is more polar than PEG/wax phases, resulting in unique elution patterns. It has a higher maximum temperature than most PEG/wax columns (280 °C compared to 260-270 °C). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice.
USP Code: None
Phase: Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide
Temp. Limits: 35 °C to 280 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 35-280 °C temperature (isothermal or programmed) Beta value 313 df 0.14 µm application(s) gas chromatography (GC): suitable L x I.D. 20 m x 0.18 mm matrix active group Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase column type capillary polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL60i Capillary GC Column 29832-U
NACRES: SB.54 General descriptionApplication: The selectivity of SLB-IL60i is more polar than PEG/wax phases, resulting in unique elution patterns. It has a higher maximum temperature than most PEG/wax columns (280 °C compared to 260-270 °C). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice.
USP Code: None
Phase: Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide
Temp. Limits: 35 °C to 280 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 35-280 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase column type capillary polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL60i Capillary GC Column 29833-U
NACRES: SB.54 General descriptionApplication: The selectivity of SLB-IL60i is more polar than PEG/wax phases, resulting in unique elution patterns. It has a higher maximum temperature than most PEG/wax columns (280 °C compared to 260-270 °C). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice.
USP Code: None
Phase: Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide
Temp. Limits: 35 °C to 280 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 35-280 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 60 m x 0.25 mm matrix active group Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase Featured Industry Food and Beverages column type capillary polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL60i Capillary GC Column 29836-U
NACRES: SB.54 General descriptionApplication: The selectivity of SLB-IL60i is more polar than PEG/wax phases, resulting in unique elution patterns. It has a higher maximum temperature than most PEG/wax columns (280 °C compared to 260-270 °C). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice.
USP Code: None
Phase: Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide
Temp. Limits: 35 °C to 280 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 35-280 °C temperature (isothermal or programmed) Beta value 313 df 0.26 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.32 mm matrix active group Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase Featured Industry Food and Beverages column type capillary polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL60i Intuvo Capillary GC Column 29833UINT
General descriptionApplication: The selectivity of SLB-IL60i is more polar than PEG/wax phases, resulting in unique elution patterns. It has a higher maximum temperature than most PEG/wax columns (280 °C compared to 260-270 °C). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice.
USP Code: None
Phase: Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide
Temp. Limits: 35 °C to 280 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 60 m x 0.25 mm matrix active group Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase column type capillary polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-IL60i Intuvo Capillary GC Column 29832UINT
General descriptionApplication: The selectivity of SLB-IL60i is more polar than PEG/wax phases, resulting in unique elution patterns. It has a higher maximum temperature than most PEG/wax columns (280 °C compared to 260-270 °C). Excellent alternative to existing PEG/wax columns. Also a good GCxGC column choice.
USP Code: None
Phase: Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide
Temp. Limits: 35 °C to 280 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase column type capillary polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-IL61 Capillary GC Column 29484-U
eCl@ss: 32119290 General descriptionApplication: The first of our third generation ionic liquid columns. Modified (triflate anion) version of SLB-IL59 increases inertness. Selectivity more polar than PEG/wax phases, resulting in unique elution patterns. Higher maximum temperature than PEG/wax columns (290 C compared to 270-280 C). Great choice for analysis of neutral and moderately basic analytes. Launched in 2010.
USP Code: None
Phase:- Non-bonded
- 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethylsulfonyl)imide trifluoromethylsulfonate
- 40 °C to 290 °C (isothermal or programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica parameter 40-290 °C temperature (isothermal or programmed) Beta value 313 df 0.08 µm application(s) gas chromatography (GC): suitable (fast GC) L x I.D. 15 m x 0.10 mm matrix active group Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide trifluoromethanesulfonate phase column type capillary polar
Safety InformationRIDADR NONH for all modes of transport WGK Germany 3 Узнать цену -
SLB®-IL61 Capillary GC Column 29486-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: The first of our third generation ionic liquid columns. Modified (triflate anion) version of SLB-IL59 increases inertness. Selectivity more polar than PEG/wax phases, resulting in unique elution patterns. Higher maximum temperature than PEG/wax columns (290 C compared to 270-280 C). Great choice for analysis of neutral and moderately basic analytes. Launched in 2010.
USP Code: None
Phase:- Non-bonded
- 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethylsulfonyl)imide trifluoromethylsulfonate
- 40 °C to 290 °C (isothermal or programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 40-290 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide trifluoromethanesulfonate phase column type capillary polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL76i Capillary GC Column 29869-U
NACRES: SB.54 General descriptionApplication: The SLB-IL76i phase structure is engineered with numerous interaction mechanisms, resulting in selectivity differences even when compared to columns with similar GC column polarity scale values. Also a good GCxGC column choice.
USP Code: None
Phase: Non-bonded; Tri(tripropylphosphoniumhexanamido)triethylamine bis(trifluoromethanesulfonyl)imide
Temp. Limits: subambient to 270 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 25-270 °C temperature (isothermal or programmed) Beta value 313 df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Non-bonded; tri(tripropylphosphoniumhexanamido)triethylamine bis(trifluoromethanesulfonyl)imide phase column type capillary highly polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-IL76i Intuvo Capillary GC Column 29869UINT
General descriptionApplication: The SLB-IL76i phase structure is engineered with numerous interaction mechanisms, resulting in selectivity differences even when compared to columns with similar GC column polarity scale values. Also a good GCxGC column choice.
USP Code: None
Phase: Non-bonded; Tri(tripropylphosphoniumhexanamido)triethylamine bis(trifluoromethanesulfonyl)imide
Temp. Limits: subambient to 270 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.20 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Non-bonded; tri(tripropylphosphoniumhexanamido)triethylamine bis(trifluoromethanesulfonyl)imide phase column type capillary highly polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-IL82 Capillary GC Column 29477-U
eCl@ss: 32119290 General descriptionApplication: Selectivity slightly more polar than polysiloxane phases with a high percentage of cyanopropyl pendent groups, resulting in unique elution patterns. Great choice for analysis of neutral and moderately basic analytes. Launched in 2010.
USP Code: None
Phase:- Non-bonded
- 1,12-Di(2,3-dimethylimidazolium)dodecane bis(trifluoromethylsulfonyl)imide
- 50 °C to 270 °C (isothermal or programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica parameter 50-270 °C temperature (isothermal or programmed) Beta value 313 df 0.08 µm application(s) gas chromatography (GC): suitable (fast GC) L x I.D. 15 m x 0.10 mm matrix active group Non-bonded; 1,12-Di(2,3-dimethylimidazolium)dodecane bis(trifluoromethanesulfonyl)imide phase Featured Industry Environmental column type capillary highly polar Узнать цену -
SLB®-ILPAH Capillary GC Column 29799-U
NACRES: SB.54 General descriptionApplication: This special purpose and specially tested capillary GC column is designed for the analysis of polycyclic aromatic hydrocarbons (PAHs). It incorporates an ionic liquid stationary phase. Each column is individually tested to ensure resolution of several key sets (phenanthrene/anthracene, benzo[a]anthracene/chrysene/triphenylene, and benzo [b]fluoranthene/benzo[k]fluoranthene/benzo[j]fluoranthene).
USP Code: None
Phase: Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide
Temp. Limits: Subambient to 300 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter 25-300 °C temperature (isothermal or programmed) Beta value 900 df 0.05 µm application(s) gas chromatography (GC): suitable L x I.D. 20 m x 0.18 mm matrix active group Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase Featured Industry Food and Beverages column type capillary polar
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
SLB®-ILPAH Intuvo Capillary GC Column 29799UINT
General descriptionApplication: This special purpose and specially tested capillary GC column is designed for the analysis of polycyclic aromatic hydrocarbons (PAHs). It incorporates an ionic liquid stationary phase. Each column is individually tested to ensure resolution of several key sets (phenanthrene/anthracene, benzo[a]anthracene/chrysene/triphenylene, and benzo [b]fluoranthene/benzo[k]fluoranthene/benzo[j]fluoranthene).
USP Code: None
Phase: Non-bonded; 1,12-Di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide
Temp. Limits: Subambient to 300 °C (isothermal or programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.05 µm application(s) gas chromatography (GC): suitable L x I.D. 20 m x 0.18 mm matrix active group Non-bonded; 1,12-di(tripropylphosphonium)dodecane bis(trifluoromethanesulfonyl)imide phase column type capillary polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-PAHms Capillary GC Column 28339-U
NACRES: SB.54 General descriptionApplication: This special purpose and specially tested capillary GC column is designed for the analysis of polycyclic aromatic hydrocarbons (PAHs). It incorporates a high phenyl content polysiloxane stationary phase. Each column is individually tested to ensure resolution of several key sets (triphenylene/chrysene, and benzo[b]fluoranthene/benzo[k]fluoranthene/benzo[j]fluoranthene). The low bleed characteristics, inertness, and durable nature make it a great column anywhere a low bleed polar column is required.
USP Code: None
Phase: Bonded; Proprietary
Temp. Limits: ambient to 350 °C (isothermal) or 360 °C (programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica Торговая марка SLB® parameter 25-350 °C temperature (isothermal), 25-360 °C temperature (programmed) Beta value 250 df 0.18 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 20 m x 0.18 mm matrix active group Bonded; proprietary phase Featured Industry Food and Beverages column type capillary polar Узнать цену -
SLB®-PAHms Capillary GC Column 28340-U
NACRES: SB.54 General descriptionApplication: This special purpose and specially tested capillary GC column is designed for the analysis of polycyclic aromatic hydrocarbons (PAHs). It incorporates a high phenyl content polysiloxane stationary phase. Each column is individually tested to ensure resolution of several key sets (triphenylene/chrysene, and benzo[b]fluoranthene/benzo[k]fluoranthene/benzo[j]fluoranthene). The low bleed characteristics, inertness, and durable nature make it a great column anywhere a low bleed polar column is required.
USP Code: None
Phase: Bonded; Proprietary
Temp. Limits: ambient to 350 °C (isothermal) or 360 °C (programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica Торговая марка SLB® parameter 25-350 °C temperature (isothermal), 25-360 °C temperature (programmed) Beta value 250 df 0.25 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded; proprietary phase column type capillary polar Узнать цену -
SLB®-PAHms Intuvo Capillary GC Column 28340UINT
General descriptionApplication: This special purpose and specially tested capillary GC column is designed for the analysis of polycyclic aromatic hydrocarbons (PAHs). It incorporates a high phenyl content polysiloxane stationary phase. Each column is individually tested to ensure resolution of several key sets (triphenylene/chrysene, and benzo[b]fluoranthene/benzo[k]fluoranthene/benzo[j]fluoranthene). The low bleed characteristics, inertness, and durable nature make it a great column anywhere a low bleed polar column is required.
USP Code: None
Phase: Bonded; Proprietary
Temp. Limits: ambient to 350 °C (isothermal) or 360 °C (programmed)Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.25 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded; proprietary phase column type capillary polar compatibility for use with Agilent Intuvo GC Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
