GC Columns, Accessories & Adsorbents
- Сортировать:
- Вид таблицей
-
Premium Grade 304 Stainless Steel Tubing 20553
eCl@ss: 32119290 General descriptionType 304 Stainless steel is covered by highly protective film of chromium oxyhydroxide. Hydrochloric acid solution readily attacks 304SS. Hence, it is recommended to add inhibitors like heterocyclic compounds to reduce the corrosion rate. 304SS material is suitable for tubing and for wires as it exhibit strength and is corrosion resistant.
Grade 304 tubing, specially cleaned to ensure inertness. Use for sensitive GC-MS applications.Application304SS tubing may be used to make homemade reactor coil for gas chromatography oven to determine the effect of thermal volume expansion of solvents under superheated conditions.Параметрыmaterial premium grade stainless steel (304) application(s) gas chromatography (GC): suitable tubing L × O.D. × I.D. 100 ft x 1/16 in. (1.59 mm) x 0.030 in. (0.762 mm) Узнать цену -
Premium Grade 304 Stainless Steel Tubing 20527
General descriptionType 304 stainless steel is covered by highly protective film of chromium oxyhydroxide. Hydrochloric acid solution readily attacks 304SS. Hence, it is recommended to add inhibitors like heterocyclic compounds to reduce the corrosion rate. 304SS materials are suitable for tubing and for wires as they exhibit strength and are corrosion resistant.
Grade 304 tubing, specially cleaned to ensure inertness. Use for sensitive GC-MS applications.Application304SS tubing may be used to make homemade reactor coil for gas chromatography oven to determine the effect of thermal volume expansion of solvents under superheated conditions.Параметрыmaterial premium grade stainless steel (304) application(s) gas chromatography (GC): suitable tubing L × O.D. × I.D. 50 ft x 1/4 in. (6.35 mm) x 0.209 in. (5.3 mm) Узнать цену -
Premium Grade 304 Stainless Steel Tubing 20526-U
NACRES: SB.54 General descriptionType 304 stainless steel is covered by highly protective film of chromium oxyhydroxide. Hydrochloric acid solution readily attacks 304SS. Hence, it is recommended to add inhibitors like heterocyclic compounds to reduce the corrosion rate. 304SS materials are suitable for tubing and for wires as it exhibit strength and are corrosion resistant.
Grade 304 tubing, specially cleaned to ensure inertness. Use for sensitive GC-MS applications.Application304SS tubing may be used to make homemade reactor coil for Gas chromatography oven to determine the effect of thermal volume expansion of solvents under superheated conditions.Параметрыmaterial premium grade stainless steel (304) tubing L × O.D. × I.D. 50 ft x 1/8 in. (3.18 mm) x 0.085 in. (2.1 mm) Узнать цену -
PTA-5 Capillary GC Column 24333
eCl@ss: 32119290 General descriptionCapillary GC column is also known as open tubular column. The carrier gas flows through the central aperture and is unrestricted throughout the length of the column. PTA-5 Capillary GC Column is a specially treated nonpolar capillary column, and is primarily dedicated towards amino compounds.
Application: This column is designed for analyses of amines and other basic analytes.
USP Code: None
Phase:- Bonded
- Base-modified poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 320 °C (isothermal or programmed)
- 0.53 mm I.D., <2 µm: -60 °C to 320 °C (isothermal or programmed)
- 0.53 mm I.D., 2 µm: -60 °C to 260 °C (isothermal) or 280 °C (programmed)
ApplicationPTA-5 Capillary GC Column was used in solidphase microextraction (SPME) and gas chromatography-mass spectrometry, performed for the analysis and screening of 21 amphetamine-related compounds in urine.Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsПараметрыQuality Level 100 material fused silica parameter -60-320 °C temperature (isothermal or programmed) Beta value 53 df 1.50 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.32 mm matrix active group Bonded; base-modified poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Forensics and Toxicology
Personal Care
Pharmaceutical (small molecule)column type capillary non-polar 178,79 € / 16 957 ₽Получить предложение -
PTA-5 Capillary GC Column 24330
eCl@ss: 32119290 General descriptionCapillary GC column is also known as open tubular column. The carrier gas flows through the central aperture and is unrestricted throughout the length of the column. PTA-5 Capillary GC Column is a specially treated nonpolar capillary column, and is primarily dedicated towards amino compounds.
Application: This column is designed for analyses of amines and other basic analytes.
USP Code: None
Phase:- Bonded
- Base-modified poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 320 °C (isothermal or programmed)
- 0.53 mm I.D., <2 µm: -60 °C to 320 °C (isothermal or programmed)
- 0.53 mm I.D., 2 µm: -60 °C to 260 °C (isothermal) or 280 °C (programmed)
ApplicationPTA-5 Capillary GC Column was used in solidphase microextraction (SPME) and gas chromatography-mass spectrometry, performed for the analysis and screening of 21 amphetamine-related compounds in urine.Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsПараметрыQuality Level 100 material fused silica parameter -60-320 °C temperature (isothermal or programmed) Beta value 63 df 1.00 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded; base-modified poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Forensics and Toxicology
Personal Care
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену -
PTA-5 Capillary GC Column 25439
eCl@ss: 32119290 General descriptionCapillary GC column is also known as open tubular column. The carrier gas flows through the central aperture and is unrestricted throughout the length of the column. PTA-5 Capillary GC Column is a specially treated nonpolar capillary column, and is primarily dedicated towards amino compounds.
Application: This column is designed for analyses of amines and other basic analytes.
USP Code: None
Phase:- Bonded
- Base-modified poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 320 °C (isothermal or programmed)
- 0.53 mm I.D., <2 µm: -60 °C to 320 °C (isothermal or programmed)
- 0.53 mm I.D., 2 µm: -60 °C to 260 °C (isothermal) or 280 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsПараметрыQuality Level 100 material fused silica parameter -60-260 °C temperature (isothermal), -60-280 °C temperature (programmed) Beta value 44 df 3.00 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.53 mm matrix active group Bonded; base-modified poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Forensics and Toxicology
Personal Care
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену -
PTA-5 Capillary GC Column 24277
eCl@ss: 32119290 General descriptionCapillary GC column is also known as open tubular column. The carrier gas flows through the central aperture and is unrestricted throughout the length of the column. PTA-5 Capillary GC Column is a specially treated nonpolar capillary column, and is primarily dedicated towards amino compounds.
Application: This column is designed for analyses of amines and other basic analytes.
USP Code: None
Phase:- Bonded
- Base-modified poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 320 °C (isothermal or programmed)
- 0.53 mm I.D., <2 µm: -60 °C to 320 °C (isothermal or programmed)
- 0.53 mm I.D., 2 µm: -60 °C to 260 °C (isothermal) or 280 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsПараметрыQuality Level 100 material fused silica parameter -60-320 °C temperature (isothermal or programmed) Beta value 125 df 0.50 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded; base-modified poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Forensics and Toxicology
Personal Care
Pharmaceutical (small molecule)column type capillary non-polar 28,25 € / 2 679 ₽Получить предложение -
PTFE (FEP) Tubing 20532
General descriptionPolytetrafluoroethylene (PTFE) or Fluorinated Ethylene Propylene (FEP) is a fluoropolymer which is the most lubricious polymer with low co-efficient of friction. PTFE tubing is chosen due to its excellent hydrophobicity, chemical inertness, and ability to withstand high pressures. It can be suitable to protect the optical fibres.
Maximum temperature of 200 °C.ApplicationPTFE tubing may be used to connect the gas lines to the ports during gas chromatography-mass spectrometry analysis of volatile organic compounds from potato tubers inoculated with Phytophthora infestans or Fusarium coeruleum.Legal InformationПараметрыapplication(s) gas chromatography (GC): suitable tubing L × O.D. × I.D. 50 ft x 1/8 in. (3.18 mm) x 0.085 in. (2.1 mm) Узнать цену -
PTFE Packed GC Column (General Configuration) 11501-U
NACRES: SB.54 General descriptionFor low temperature applications, a PTFE column offers the flexibility of metal with inertness approaching that of glass. This column is of a general configuration, and can be carefully bent to fit most instruments.ПараметрыQuality Level 100 material PTFE application(s) gas chromatography (GC): suitable L × O.D. × I.D. 8.0 ft (2.4 m) x 1/8 in. x 2.1 mm, Ends empty; middle 6 ft packed matrix Chromosil 310 support matrix active group none phase Featured Industry Pharmaceutical (small molecule) column type packed GC compatibility configured for general coil use, for analyte group used with sulfur compounds, for use with General Configuration
Safety Informationpictograms GHS05 signalword Warning hcodes H290 RIDADR UN 3453 8 / PGIII WGK Germany 3 Узнать цену -
PTFE Packed GC Column (General Configuration) 11496
eCl@ss: 32110502 General descriptionFor low temperature applications, a PTFE column offers the flexibility of metal with inertness approaching that of glass. This column is of a general configuration, and can be carefully bent to fit most instruments.ПараметрыQuality Level 100 material PTFE application(s) gas chromatography (GC): suitable L × O.D. × I.D. 8.0 ft (2.4 m) x 1/8 in. x 2.1 mm, Ends empty, middle 6 ft packed matrix Chromosil 330 support matrix active group none phase Featured Industry Pharmaceutical (small molecule) column type packed GC compatibility for analyte group sulfur compounds, for use with General Configuration Узнать цену -
PTFE Tubing 20533
General descriptionPolytetrafluoroethylene (PTFE) is a fluoropolymer which is the most lubricious polymer with low co-efficient of friction. PTFE tubing is chosen due to its excellent hydrophobicity, chemical inertness, and ability to withstand high pressures. It can be suitable to protect the optical fibres.
Maximum temperature of 240 °C.ApplicationPTFE tubing may be used to connect the gas lines to the ports during gas chromatography-mass spectrometry analysis of volatile organic compounds from potato tubers inoculated with Phytophthora infestans or Fusarium coeruleum.Параметрыmaterial PTFE (TFE), PTFE tubing application(s) gas chromatography (GC): suitable tubing L × O.D. × I.D. 25 ft x 1/4 in. (6.35 mm) x 0.228 in. (5.8 mm) Узнать цену -
PTFE Tubing 20531
General descriptionPolytetrafluoroethylene (PTFE) is a fluoropolymer which is the most lubricious polymer with low co-efficient of friction. PTFE tubing is chosen due to its excellent hydrophobicity, chemical inertness, and ability to withstand high pressures. It can be suitable to protect the optical fibres.
Maximum temperature of 240 °C.ApplicationPTFE tubing may be used to connect the gas lines to the ports during Gas Chromatography-mass spectrometry analysis of volatile organic compounds from potato tubers inoculated with Phytophthora infestans or Fusarium coeruleum.Параметрыmaterial PTFE (TFE), PTFE tubing application(s) gas chromatography (GC): suitable tubing L × O.D. × I.D. 25 ft x 0.085 in. (2.1 mm) x 0.062 in. (1.58 mm) Узнать цену -
PureCol Sleeve 20534
General descriptionWhen nonvolatiles accumulate in the column inlet, you must replace several inches of packing - or the entire column. A silanized glass PureCol sleeve, inserted in the column inlet, solves this problem simply and inexpensively. When column performance begins to deteriorate, you can quickly and conveniently replace the sleeve - often without removing the column from the instrument. Replacement time is comparable to replacing a septum. Replace the PureCol sleeve when you change the septum, or when you analyze a new type of sample. PureCol sleeves are available in two sizes. Use PureCol sleeves with a 2 in. (5 cm) 21-gauge or finer needle.Other NotesFits any 2 mm I.D. glass column with 7 cm of straight, unpacked inlet (end must be chamfered).Параметрыpackaging pkg of 10 ea application(s) gas chromatography (GC): suitable Узнать цену -
Reducing Union (1/4 in. to 1/16 in.) 23633
General descriptionReducing unions are mostly suitable as metal column terminators. All original reducing unions have a bore in the centre of about 6mm in length and an internal diameter of 1.2mm. Moreover, reducing unions have a large bore at the non-reducing site. Modification is necessary in reducing union in order to minimize peak broadening, pressure resistance and to ease the installation process.
Узнать цену -
Reducing Union for Direct Injection Conversion Kit 23794
General descriptionReducing unions are mostly used as metal column terminators. All original reducing unions have a bore in the centre of about 6mm in length and an internal diameter of 1.2mm. Moreover, reducing unions have a large bore at the non-reducing site. Modification is necessary in reducing union in order to minimize peak broadening, pressure resistance and to ease the installation process.Параметрыport diam. 1/4 in. sleeve L 5 in. (13 cm) compatibility for connecting Direct Injection Conversion Kit 80,42 € / 7 627 ₽Получить предложение -
SAC™-5 Capillary GC Column 24156
eCl@ss: 32119290 General descriptionApplication: This column is an application specific non-polar column, designed for reproducible analyses of plant sterols, cholesterol, and other animal sterols.
USP Code: None
Phase:- Bonded
- Poly(5% diphenyl/95% dimethyl siloxane)
- -60 °C to 320 °C (isothermal or programmed)
ApplicationSAC™-5 capillary column was found suitable to be used for the direct determination of seven major isosteroidal alkaloids in Fritillaria bulbs by gas chromatography.Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSAC is a trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica parameter -60-320 °C temperature (isothermal or programmed) Beta value 250 df 0.25 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded; poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Agriculture
Clinical
Food and Beverages
Forensics and Toxicologycolumn type capillary non-polar
Safety InformationRIDADR NONH for all modes of transport 2 498,96 € / 237 014 ₽Получить предложение -
Капиллярная газоразрядная колонка SCOT Supelco 23813-U
Общее описаниеNACRES: SB.54
Капиллярные колонки в основном бывают двух типов: открытые трубчатые с настенным покрытием (WCOT) и открытые трубчатые с опорным покрытием (SCOT). Колонки WCOT состоят из капиллярной трубки, стенки которой покрыты жидкой неподвижной фазой. В капиллярных колонках SCOT внутренняя стенка капилляра покрыта тонким слоем дисперсного материала, такого как диатомовая земля; затем на этот материал наносится тонкий слой жидкой неподвижной фазы. Это является дополнительным преимуществом колонок SCOT, поскольку обеспечивает им большую площадь поверхности и более толстый слой неподвижной фазы, чем колонкам WCOT.
Компания Supelco является лидером в производстве колонн с открытым трубчатым покрытием SCOT. Наша непревзойденная технология производства позволяет нам наносить равномерный слой частиц, покрытых жидкой фазой, на внутреннюю стенку труб из нержавеющей стали. Эта технология дает нам доступ ко многим фазам, которые недоступны при использовании обычной технологии изготовления капиллярных колонок из плавленого кремнезема. Колонки SCOT сочетают в себе чувствительность и превосходное разрешение образцов капиллярного ГХ с обширной библиотекой стационарных фаз упакованного ГХ.
Все наши колонки SCOT имеют размеры 50 футов x 1/32 дюйма в диаметре и 0,02 дюйма в диаметре и имеют разъемы диаметром 1/16 дюйма на каждом конце. Они скручены в рулоны толщиной 3,5 дюйма, с 12-дюймовыми колоннами на каждом конце. Четыре колонки доступны в ассортименте. Колонки с другими фазами могут быть доступны по нашей специальной программе.
Приложение
Капиллярная газохроматографическая колонка SCOT может использоваться для газовой хроматографии высокого разрешения. Ее также можно использовать для определения состава негидроксижирных кислот в липидах головного мозга крыс.
Другие примечания
Дополнительные продукты:
Шприцы
Флаконы
Газоочистка и управление газовыделением
Впускные прокладки, стекловата и специализированные ручные инструменты
Перегородки и специализированные ручные инструменты
Наконечники колонн, гайки и специализированные ручные инструменты
ПараметрыУровень качества 100 Материал нержавеющая сталь Описание 3.5 in. banded coil, DNDP = di-n-decyl phthalate, Dimensions: 1/16 in. connections, SCOT = Support Coated Open Tubular Параметр 10-150 °C температура (изотермическая или запрограммированная) Бета-значение 45 Область применения газовая хроматография (GC): подходит L x O.D. x I.D. 50 ft x 1/32 in. x 0.5 mm Активная группа матрицы Bentone 34/DNDP phase Избранная отрасль Химические вещества и промышленные полимеры Тип колонки капилярная SCOT Узнать цену -
Капиллярная газоразрядная колонка SCOT Supelco 23829-U
NACRES: SB.54
Общее описание
Капиллярные колонки в основном бывают двух типов: открытые трубчатые с настенным покрытием (WCOT) и открытые трубчатые с опорным покрытием (SCOT). Колонки WCOT состоят из капиллярной трубки, стенки которой покрыты жидкой неподвижной фазой. В капиллярных колонках SCOT внутренняя стенка капилляра покрыта тонким слоем дисперсного материала, такого как диатомовая земля; затем на этот материал наносится тонкий слой жидкой неподвижной фазы. Это является дополнительным преимуществом колонок SCOT, поскольку обеспечивает им большую площадь поверхности и более толстый слой неподвижной фазы, чем колонкам WCOT.
Компания Supelco является лидером в производстве колонн с открытым трубчатым покрытием SCOT. Наша непревзойденная технология производства позволяет нам наносить равномерный слой частиц, покрытых жидкой фазой, на внутреннюю стенку труб из нержавеющей стали. Эта технология дает нам доступ ко многим фазам, которые недоступны при использовании обычной технологии изготовления капиллярных колонок из плавленого кремнезема. Колонки SCOT сочетают в себе чувствительность и превосходное разрешение образцов капиллярного ГХ с обширной библиотекой стационарных фаз упакованного ГХ.
Все наши колонки SCOT имеют размеры 50 футов x 1/32 дюйма в диаметре и 0,02 дюйма в диаметре и имеют разъемы диаметром 1/16 дюйма на каждом конце. Они скручены в рулоны толщиной 3,5 дюйма, с 12-дюймовыми колоннами на каждом конце. Четыре колонки доступны в ассортименте. Колонки с другими фазами могут быть доступны по нашей специальной программе.
Приложение
Капиллярная газохроматографическая колонка SCOT может использоваться для газовой хроматографии высокого разрешения. Ее также можно использовать для определения состава негидроксижирных кислот в липидах головного мозга крыс.
Другие примечания
Дополнительные продукты:
Шприцы
Флаконы
Газоочистка и управление газовыделением
Впускные прокладки, стекловата и специализированные ручные инструменты
Перегородки и специализированные ручные инструменты
Наконечники колонн, гайки и специализированные ручные инструменты
ПараметрыМатериал нержавеющая сталь Описание спираль с кольцом диаметром 3,5 дюйма, размеры соединений: 1/16 дюйма, SCOT = Открытая труба с опорным покрытием, TCEP = 1,2,3-трис (2-цианоэтокси)пропан Параметр 0-150 °C температура (изотермическая или запрограммированная) Бета-значение 40 Область применения газовая хроматография (GC): подходит L x O.D. x I.D. 50 ft x 1/32 in. x 0.5 mm Активная группа матрицы TCEP phase Избранная отрасль Химические вещества и промышленные полимеры Тип колонки капилярная SCOT Узнать цену -
Капиллярная газоразрядная колонка SCOT Supelco 23818-U
NACRES: SB.54
Общее описание
Капиллярные колонки в основном бывают двух типов: открытые трубчатые с настенным покрытием (WCOT) и открытые трубчатые с опорным покрытием (SCOT). Колонки WCOT состоят из капиллярной трубки, стенки которой покрыты жидкой неподвижной фазой. В капиллярных колонках SCOT внутренняя стенка капилляра покрыта тонким слоем дисперсного материала, такого как диатомовая земля; затем на этот материал наносится тонкий слой жидкой неподвижной фазы. Это является дополнительным преимуществом колонок SCOT, поскольку обеспечивает им большую площадь поверхности и более толстый слой неподвижной фазы, чем колонкам WCOT.
Компания Supelco является лидером в производстве колонн с открытым трубчатым покрытием SCOT. Наша непревзойденная технология производства позволяет нам наносить равномерный слой частиц, покрытых жидкой фазой, на внутреннюю стенку труб из нержавеющей стали. Эта технология дает нам доступ ко многим фазам, которые недоступны при использовании обычной технологии изготовления капиллярных колонок из плавленого кремнезема. Колонки SCOT сочетают в себе чувствительность и превосходное разрешение образцов капиллярного ГХ с обширной библиотекой стационарных фаз упакованного ГХ.
Все наши колонки SCOT имеют размеры 50 футов x 1/32 дюйма в диаметре и 0,02 дюйма в диаметре и имеют разъемы диаметром 1/16 дюйма на каждом конце. Они скручены в рулоны толщиной 3,5 дюйма, с 12-дюймовыми колоннами на каждом конце. Четыре колонки доступны в ассортименте. Колонки с другими фазами могут быть доступны по нашей специальной программе.
Приложение
Капиллярная газохроматографическая колонка SCOT может использоваться для газовой хроматографии высокого разрешения. Ее также можно использовать для определения состава негидроксижирных кислот в липидах головного мозга крыс.
Другие примечания
Дополнительные продукты:
Шприцы
Флаконы
Газоочистка и управление газовыделением
Впускные прокладки, стекловата и специализированные ручные инструменты
Перегородки и специализированные ручные инструменты
Наконечники колонн, гайки и специализированные ручные инструменты
ПараметрыУровень качества 100 Материал нержавеющая сталь Описание спираль с лентой диаметром 3,5 дюйма, BMEA = бис-метоксиэтиладипат, Размеры соединений: 1/16 дюйма, SCOT = Открытая труба с опорным покрытием Параметр Температура 25-100 °C (изотермическая или запрограммированная) Бета-значение 40 Область применения газовая хроматография (GC): подходит L x O.D. x I.D. 50 ft x 1/32 in. x 0.5 mm Активная группа матрицы BMEA phase Избранная отрасль Химические вещества и промышленные полимеры Тип колонки капилярная SCOT Узнать цену -
SE-30 24004-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionThe SE-30 column is a nonbonded column often used to perform separations in many applications areas.ApplicationSE-30 may be used in the following applications:- as a liquid phase for the gas-liquid chromatographic analysis of drugs.
- SE-30 glass capillary column may also be used to study the temperature dependence of the retention index for perfumery compounds.
- SE-30 column may also be used for gas-liquid chromatographic determination of fecal neutral sterols.
- It may also be used for determination of the absolute configuration of neutral monosaccharides, 2-acetamido-2-deoxy sugars, and uronic acids.
Chem/Phys ResistanceTemp. Limits:- subambient to 320 °C
ПараметрыQuality Level 100 material fused silica Beta value 250 df 0.25 application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group poly(dimethyl silicone) gum phase column type capillary non-polar Узнать цену -
SE-54 24001
eCl@ss: 32119290 General descriptionThe SE-54 column is a classic non-bonded column based on a poly(94% methyl/5% phenyl) silicone. The phase also includes 1% vinyl. This column is popular for polynuclear aromatics and underivatized phenolics.
This column meets USP G36 requirements.ApplicationSE-4 and OV-1 stationary phases may be used in a quantitative structure-property relationship technique, for the simultaneous prediction of Kovats retention indices for some esters, alcohols, aldehyde and ketones, using an artificial neural network (ANN). SE-54 stationary phase may also be used in capillary gas chromatography and combined gas chromatography-mass spectrometry to study the volatile components of a coal tar pitch.Chem/Phys ResistanceTemp. Limits:- subambient to 320 °C
Параметрыmaterial fused silica Beta value 250 df 0.25 application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group (94% methyl/5%phenyl)silicone phase 118,19 € / 11 210 ₽Получить предложение -
Septum Puller 20352
General descriptionThe hook septum puller is great for removing soft silicone septa from injection ports, and graphite ferrules from columns nuts. It has dozens of other uses around the lab.Параметрыpackaging pkg of 1 ea application(s) gas chromatography (GC): suitable L 4 in. Узнать цену -
Shortix™ Tubing Cutter 21386-U
NACRES: SB.54 General descriptionCorrect fitting of a ferrule is very important in column performance. The ferrule needs to be properly sized and squarely cut using a tubing cutter and the cut should be examined by a magnifier. This is important as column fragments or ferrule particles can contaminate the column. Hence, the column ends are pointed towards the floor during cutting.Legal InformationShortix is a trademark of Scientific Glass Technology B.V.Параметрыpackaging pkg of 1 ea
Safety InformationRIDADR NONH for all modes of transport WGK Germany 3 Узнать цену -
Silica PLOT Capillary GC Column 28801-U
NACRES: SB.54 General descriptionApplication: This column can be used for the separation of C1-C4 hydrocarbons (even in the presence of moisture), fluorocarbons, sulfur gases, and carbon dioxide.
USP Code: None
Phase:- Silica
- -80 °C to 225 °C (isothermal or programmed)
Параметрыmaterial fused silica description PLOT = Porous Layer Open Tubular parameter -80-225 °C temperature (isothermal or programmed) average thickness 4 µm df 4 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.32 mm matrix active group Silica phase Featured Industry Chemicals and Industrial Polymers column type capillary PLOT Узнать цену -
SLB®-1ms Capillary GC Column 29731-U
NACRES: SB.54 General descriptionApplication: The non-polar dimethyl phase provides a boiling point elution order. The low bleed characteristics, inertness, and durable nature make it the column of choice for many petrochemical appplications, or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G1, G2, and G9 requirements.
Phase:- Bonded and crosslinked
- Poly(dimethyl siloxane)
- -60 °C to 340 °C (isothermal) or 360 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method meets requirements for USP G1, G2 and G9 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 250 df 0.25 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded and crosslinked; poly(dimethyl siloxane) phase Featured Industry Petroleum column type capillary non-polar Узнать цену -
SLB®-1ms Intuvo Capillary GC Column 29731UINT
General descriptionApplication: The non-polar dimethyl phase provides a boiling point elution order. The low bleed characteristics, inertness, and durable nature make it the column of choice for many petrochemical appplications, or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G1, G2, and G9 requirements.
Phase:- Bonded and crosslinked
- Poly(dimethyl siloxane)
- -60 °C to 340 °C (isothermal) or 360 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.25 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded and crosslinked; poly(dimethyl siloxane) phase column type capillary non-polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-35ms Capillary GC Column 29808-U
NACRES: SB.54 General descriptionApplication: The 35% phenyl equivalent phase provides a higher polarity option compared to columns containing a lower phenyl content, resulting in a greater retention of polar analytes relative to non-polar compounds. Its selectivity is complementary when paired with SLB-5ms for applications that require dual-column confirmatory analysis, such as for environmental analytes (such as pesticides, PCBs, and herbicides). The low bleed characteristics, inertness, and durable nature make it a great column anywhere a low bleed intermediate polar column is required.
USP Code: This column meets USP G42 requirements.
Phase:- Bonded and highly crosslinked
- Proprietary polymer virtually equivalent in polarity to poly(35% diphenyl/65% dimethyl siloxane)
- 0.32 mm I.D.: ambient to 350 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: ambient to 330 °C (isothermal) or 340 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method EPA 608/8081/OLM04.2 PEST, meets requirements for USP G42 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 250 df 0.10 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable (fast GC) L x I.D. 15 m x 0.10 mm matrix active group Bonded and highly crosslinked; proprietary polymer virtually equivalent in polarity to poly(35% diphenyl/65% dimethyl siloxane) phase Featured Industry Agriculture
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Personal Carecolumn type capillary intermediate polar Узнать цену -
SLB®-35ms Capillary GC Column 29809-U
NACRES: SB.54 General descriptionApplication: The 35% phenyl equivalent phase provides a higher polarity option compared to columns containing a lower phenyl content, resulting in a greater retention of polar analytes relative to non-polar compounds. Its selectivity is complementary when paired with SLB-5ms for applications that require dual-column confirmatory analysis, such as for environmental analytes (such as pesticides, PCBs, and herbicides). The low bleed characteristics, inertness, and durable nature make it a great column anywhere a low bleed intermediate polar column is required.
USP Code: This column meets USP G42 requirements.
Phase:- Bonded and highly crosslinked
- Proprietary polymer virtually equivalent in polarity to poly(35% diphenyl/65% dimethyl siloxane)
- 0.32 mm I.D.: ambient to 350 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: ambient to 330 °C (isothermal) or 340 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method EPA 608/8081/OLM04.2 PEST, meets requirements for USP G42 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 250 df 0.18 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable (fast GC) L x I.D. 20 m x 0.18 mm matrix active group Bonded and highly crosslinked; proprietary polymer virtually equivalent in polarity to poly(35% diphenyl/65% dimethyl siloxane) phase Featured Industry Agriculture
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Personal Carecolumn type capillary intermediate polar Узнать цену -
SLB®-35ms Capillary GC Column 29804-U
NACRES: SB.54 General descriptionApplication: The 35% phenyl equivalent phase provides a higher polarity option compared to columns containing a lower phenyl content, resulting in a greater retention of polar analytes relative to non-polar compounds. Its selectivity is complementary when paired with SLB-5ms for applications that require dual-column confirmatory analysis, such as for environmental analytes (such as pesticides, PCBs, and herbicides). The low bleed characteristics, inertness, and durable nature make it a great column anywhere a low bleed intermediate polar column is required.
USP Code: This column meets USP G42 requirements.
Phase:- Bonded and highly crosslinked
- Proprietary polymer virtually equivalent in polarity to poly(35% diphenyl/65% dimethyl siloxane)
- 0.32 mm I.D.: ambient to 350 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: ambient to 330 °C (isothermal) or 340 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method EPA 608/8081/OLM04.2 PEST, meets requirements for USP G42 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 250 df 0.25 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded and highly crosslinked; proprietary polymer virtually equivalent in polarity to poly(35% diphenyl/65% dimethyl siloxane) phase Featured Industry Agriculture
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Personal Carecolumn type capillary intermediate polar Узнать цену -
SLB®-35ms Capillary GC Column 29805-U
NACRES: SB.54 General descriptionApplication: The 35% phenyl equivalent phase provides a higher polarity option compared to columns containing a lower phenyl content, resulting in a greater retention of polar analytes relative to non-polar compounds. Its selectivity is complementary when paired with SLB-5ms for applications that require dual-column confirmatory analysis, such as for environmental analytes (such as pesticides, PCBs, and herbicides). The low bleed characteristics, inertness, and durable nature make it a great column anywhere a low bleed intermediate polar column is required.
USP Code: This column meets USP G42 requirements.
Phase:- Bonded and highly crosslinked
- Proprietary polymer virtually equivalent in polarity to poly(35% diphenyl/65% dimethyl siloxane)
- 0.32 mm I.D.: ambient to 350 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: ambient to 330 °C (isothermal) or 340 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method EPA 608/8081/OLM04.2 PEST, meets requirements for USP G42 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 250 df 0.25 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 60 m x 0.25 mm matrix active group Bonded and highly crosslinked; proprietary polymer virtually equivalent in polarity to poly(35% diphenyl/65% dimethyl siloxane) phase Featured Industry Agriculture
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Personal Carecolumn type capillary intermediate polar Узнать цену -
SLB®-35ms Capillary GC Column 29806-U
NACRES: SB.54 General descriptionApplication: The 35% phenyl equivalent phase provides a higher polarity option compared to columns containing a lower phenyl content, resulting in a greater retention of polar analytes relative to non-polar compounds. Its selectivity is complementary when paired with SLB-5ms for applications that require dual-column confirmatory analysis, such as for environmental analytes (such as pesticides, PCBs, and herbicides). The low bleed characteristics, inertness, and durable nature make it a great column anywhere a low bleed intermediate polar column is required.
USP Code: This column meets USP G42 requirements.
Phase:- Bonded and highly crosslinked
- Proprietary polymer virtually equivalent in polarity to poly(35% diphenyl/65% dimethyl siloxane)
- 0.32 mm I.D.: ambient to 350 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: ambient to 330 °C (isothermal) or 340 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method EPA 608/8081/OLM04.2 PEST, meets requirements for USP G42 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 125 df 0.50 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded and highly crosslinked; proprietary polymer virtually equivalent in polarity to poly(35% diphenyl/65% dimethyl siloxane) phase Featured Industry Agriculture
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Personal Carecolumn type capillary intermediate polar Узнать цену -
SLB®-35ms Intuvo Capillary GC Column 29806UINT
General descriptionApplication: The 35% phenyl equivalent phase provides a higher polarity option compared to columns containing a lower phenyl content, resulting in a greater retention of polar analytes relative to non-polar compounds. Its selectivity is complementary when paired with SLB-5ms for applications that require dual-column confirmatory analysis, such as for environmental analytes (such as pesticides, PCBs, and herbicides). The low bleed characteristics, inertness, and durable nature make it a great column anywhere a low bleed intermediate polar column is required.
USP Code: This column meets USP G42 requirements.
Phase:- Bonded and highly crosslinked
- Proprietary polymer virtually equivalent in polarity to poly(35% diphenyl/65% dimethyl siloxane)
- 0.32 mm I.D.: ambient to 350 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: ambient to 330 °C (isothermal) or 340 °C (programmed)
Legal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыmaterial fused silica df 0.50 µm application(s) gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded and highly crosslinked; proprietary polymer virtually equivalent in polarity to poly(35% diphenyl/65% dimethyl siloxane) phase column type capillary intermediate polar compatibility for use with Agilent Intuvo GC Узнать цену -
SLB®-5ms Capillary GC Column 28465-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method Standard Method 6040D, EN 2005/108/EC, EPA TO-13,IP-8,8270,525.2,608.1/608.2,608/8081/OLM04.2 PEST,610,625,8015,8082,8100,8141,8270,OLM04.2 SVOA, JMHLW, NIOSH 2530,5503, OSHA 62, meets requirements for USP G27 and G36 reg. compliance FDA LIB 4423 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 250 df 0.10 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable (fast GC) L x I.D. 10 m x 0.10 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Industrial Hygiene
Life Science and Biopharma
Personal Care
Petroleum
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену -
SLB®-5ms Capillary GC Column 28466-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method Standard Method 6040D, EN 2005/108/EC, EPA TO-13,IP-8,8270,525.2,608.1/608.2,608/8081/OLM04.2 PEST,610,625,8015,8082,8100,8141,8270,OLM04.2 SVOA, JMHLW, NIOSH 2530,5503, OSHA 62, meets requirements for USP G27 and G36 reg. compliance FDA LIB 4423 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 250 df 0.10 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable (fast GC) L x I.D. 15 m x 0.10 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Industrial Hygiene
Life Science and Biopharma
Personal Care
Petroleum
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену -
SLB®-5ms Capillary GC Column 28564-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method Standard Method 6040D, EN 2005/108/EC, EPA TO-13,IP-8,8270,525.2,608.1/608.2,608/8081/OLM04.2 PEST,610,625,8015,8082,8100,8141,8270,OLM04.2 SVOA, JMHLW, NIOSH 2530,5503, OSHA 62, meets requirements for USP G27 and G36 reg. compliance FDA LIB 4423 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 250 df 0.18 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable (fast GC) L x I.D. 20 m x 0.18 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Industrial Hygiene
Life Science and Biopharma
Personal Care
Petroleum
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену -
SLB®-5ms Capillary GC Column 28467-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method Standard Method 6040D, EN 2005/108/EC, EPA TO-13,IP-8,8270,525.2,608.1/608.2,608/8081/OLM04.2 PEST,610,625,8015,8082,8100,8141,8270,OLM04.2 SVOA, JMHLW, NIOSH 2530,5503, OSHA 62, meets requirements for USP G27 and G36 reg. compliance FDA LIB 4423 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 625 df 0.10 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Industrial Hygiene
Life Science and Biopharma
Personal Care
Petroleum
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену -
SLB®-5ms Capillary GC Column 28469-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method Standard Method 6040D, EN 2005/108/EC, EPA TO-13,IP-8,8270,525.2,608.1/608.2,608/8081/OLM04.2 PEST,610,625,8015,8082,8100,8141,8270,OLM04.2 SVOA, JMHLW, NIOSH 2530,5503, OSHA 62, meets requirements for USP G27 and G36 reg. compliance FDA LIB 4423 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 250 df 0.25 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 15 m x 0.25 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Industrial Hygiene
Life Science and Biopharma
Personal Care
Petroleum
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену -
SLB®-5ms Capillary GC Column 28471-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method Standard Method 6040D, EN 2005/108/EC, EPA TO-13,IP-8,8270,525.2,608.1/608.2,608/8081/OLM04.2 PEST,610,625,8015,8082,8100,8141,8270,OLM04.2 SVOA, JMHLW, NIOSH 2530,5503, OSHA 62, meets requirements for USP G27 and G36 reg. compliance FDA LIB 4423 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 250 df 0.25 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 30 m x 0.25 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Industrial Hygiene
Life Science and Biopharma
Personal Care
Petroleum
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену -
SLB®-5ms Capillary GC Column 28472-U
eCl@ss: 32119290 NACRES: SB.54 General descriptionApplication: The 5% phenyl equivalent phase provides a boiling point elution order with a slight increase in selectivity, especially for aromatic compounds. The low bleed characteristics, inertness, and durable nature make it the column of choice for environmental analytes (such as semivolatiles, pesticides, PCBs, and herbicides) or anywhere a low bleed non-polar column is required.
USP Code: This column meets USP G27 and G36 requirements.
Phase:- Bonded and highly crosslinked
- Silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane)
- 0.32 mm I.D.: -60 °C to 340 °C (isothermal) or 360 °C (programmed)
- 0.53 mm I.D.: -60 °C to 330 °C (isothermal) or 340 °C (programmed)
Other NotesComplementary products:
Syringes
Vials
Gas Purification and Gas Management
Inlet Liners, Glass Wool, and Specialized Hand Tools
Septa and Specialized Hand Tools
Column Ferrules, Nuts, and Specialized Hand ToolsLegal InformationSLB is a registered trademark of Sigma-Aldrich Co. LLCПараметрыQuality Level 100 material fused silica Agency/Method Standard Method 6040D, EN 2005/108/EC, EPA TO-13,IP-8,8270,525.2,608.1/608.2,608/8081/OLM04.2 PEST,610,625,8015,8082,8100,8141,8270,OLM04.2 SVOA, JMHLW, NIOSH 2530,5503, OSHA 62, meets requirements for USP G27 and G36 reg. compliance FDA LIB 4423 parameter -60-340 °C temperature (isothermal), -60-360 °C temperature (programmed) Beta value 250 df 0.25 µm application(s) GC/MS: suitable, gas chromatography (GC): suitable L x I.D. 60 m x 0.25 mm matrix active group Bonded and highly crosslinked; silphenylene polymer virtually equivalent in polarity to poly(5% diphenyl/95% dimethyl siloxane) phase Featured Industry Agriculture
Chemicals and Industrial Polymers
Cleaning Products
Clinical
Cosmetics
Environmental
Flavors and Fragrances
Food and Beverages
Forensics and Toxicology
Industrial Hygiene
Life Science and Biopharma
Personal Care
Petroleum
Pharmaceutical (small molecule)column type capillary non-polar Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
