Electronic Materials
- Сортировать:
- Вид таблицей
-
EL-HPE high performance electrolyte
NACRES: NA.23
Кат. номер 791482-10ML 791482-50ML ApplicationEL-HPE High Performance Electrolyte is a low viscosity, high ionic conductivity liquid electrolyte, and, therefore, provides highest performance.
Due to the low boiling point of the main solvent and the chemistry of the electrolyte mixture; EL-HPE will not provide best long term stability under standard solar conditions and/or under elevated temperature testing
Particularly suitable for glass or metal/glass substrate-based DSC systems.Packaging10, 50 mL in glass bottleLegal InformationProduct of Greatcell Solar® exclusive supplier of Sun2 products under license from EPFL.
Greatcell Solar is a registered trademark of Greatcell SolarПараметрыform liquid (transparent amber) Quality Level 100, refractive index n20/D 1.392 conductivity 16.5-18.5 mS/cm at 20 °C density 0.875 g/mL at 25 °C
Safety Informationpictograms GHS02,GHS05,GHS07,GHS08 signalword Danger hcodes H225 - H302 + H332 - H315 - H318 - H335 - H373 pcodes P210 - P280 - P301 + P312 - P304 + P340 + P312 - P305 + P351 + P338 - P314 Target Organs Respiratory system, Thyroid RIDADR UN 3286 8(6.1)(3) / PGII WGK Germany WGK 3 Flash Point F 46.4 °F Flash Point C 8 °C Узнать цену -
EL-HSE high stability electrolyte
NACRES: NA.23
Кат. номер 791466-10ML 791466-50ML ApplicationEL-HSE High Stability Electrolyte is a low toxicity liquid electrolyte to achieve ultra-long life in normal operating conditions.
This is the “work horse” electrolyte system for long term stability testing. Particularly suitable for glass or metal/glass substrate-based DSC systems.
Outstanding stability has been achieved with EL-HSE, 25,600 hours of continuous light soaking at 55-60°C and 3,000 hours at 85°C.Packaging10, 50 mL in glass bottleLegal InformationProduct of Greatcell Solar® exclusive supplier of Sun2 products under license from EPFL.
Greatcell Solar is a registered trademark of Greatcell SolarПараметрыform liquid (amber transparent) Quality Level 100, refractive index n20/D 1.442 conductivity 8-10 mS/cm at 20 °C density 1.034 g/mL at 25 °C
Safety Informationpictograms GHS05,GHS08 signalword Danger hcodes H315 - H318 - H373 pcodes P280 - P302 + P352 - P305 + P351 + P338 + P310 - P314 Target Organs Thyroid RIDADR UN 3265 8 / PGIII WGK Germany WGK 2 Flash Point F 151.0 °F Flash Point C 66.11 °C Узнать цену -
F-M 906972-100MG
Empirical Formula (Hill Notation): C99H122N4O2S2 CAS Number: 2239303-91-2 Molecular Weight: 1464.18 General descriptionNon-fullerene acceptors (NFAs) are currently a major focus of research in the development of bulk-heterojunction organic solar cells (OSCs). In contrast to the widely used fullerene acceptors (FAs), the optical properties and electronic energy levels of NFAs can be designed and readily tuned. NFA-based OSCs can also achieve greater thermal stability and photochemical stability, as well as longer device lifetimes, than their FA-based counterparts.Recent developments have led to a rapid increase in power conversion efficiencies for NFA OSCs, with values now exceeding 15% in a single junction cell, and >17% for a tandem cell, demonstrating the viability of using NFAs to replace FAs in next-generation high-performance OSCs.ApplicationF-M is a non-fullerene acceptor that absorbs visible light, when used in a front cell paired with NIR absorbing rear cell, the resulted tandem organic solar cell gave a record energy conversion efficiency of 17.3%.
Tandem Cell Device performance:
ITO/ZnO/PFN-Br/PBDB-T:F-M/M-PEDOT/ZnO/PTB7- Th:O6T-4F:PC71BM/MoO3/Ag
Voc=1.642 V
Jsc=14.35 mA/cm2
FF=73.7%
PCE=17.3%Параметрыdescription Band gap: 1.72 eV, Band gap: Eg = 1.72 eV, Solubility: Soluble in Chloroform, CB and ODCB assay 98% form solid Orbital energy HOMO -5.42 eV , LUMO -3.70 eV A
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
F8T2 685070-250MG
Linear Formula: (C37H44S2)n(C8H9)2 CAS Number: 210347-56-1 General descriptionF8T2 is a fluorenated semiconducting polymer which can be used as a hole transporting layer with mobility of 0.02cm2V-1s-1. It is highly stable in vacuum and UV based environment. Its liquid crystallinity allows it to form a self-ordered nanostructure on organic thin films.
Typically soluble in THF, Dichloromethane, or Tolune. (c = 1%, typical appearance may be clear to turbid).
Polymer is end-capped with 3,5-dimethylbenzene.ApplicationF8T2 can be majorly used in the fabrication of active layers for optoelectronics and energy based devices such as organic field effect transistors(OFETs), solar cells, light emitting diodes(LEDs) and electronic gas sensors.Packaging250 mg in glass insertПараметрыQuality Level 100, assay 99.9% mol wt average Mn >20,000 fluorescence ex 400 nm; em 497 nm in chloroform (at Mn = 20,000) semiconductor properties P-type (mobility=5x103 cm2/V·s)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FBR
Empirical Formula (Hill Notation): C53H56N6O2S6 CAS Number: 1644381-95-2 Molecular Weight: 1001.44 NACRES: NA.23
Кат. номер 900854-100MG 900854-50MG Параметрыdescription Band gap: 1.59 eV Quality Level 100, assay ≥97% form solid solubility chlorobenzene: soluble, chloroform: soluble, dichlorobenzene: soluble Orbital energy HOMO -5.61 eV , LUMO -4.02 eV
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FK 102 Co(II) PF6 salt 805238-5G
Empirical Formula (Hill Notation): C24H21CoF12N9P2 CAS Number: 1392221-69-0 Molecular Weight: 784.35 MDL number: MFCD29037024 PubChem Substance ID: 329768922 NACRES: NA.23 ApplicationUse this cobalt complexes to increase photovoltages of liquid electrolyte cells substantially or to achieve ultrahigh performance with solid state photovoltaic devices.
FK102 cobalt complexes offer guaranteed performance, high reproducibility, consistent results, and are of highest purity. In comparison to triiodide-based redox electrolytes, cobalt complexes in general increase photovoltages and particularly at lower light levels (e.g. for indoor applications), significantly increase device power output.
Recommended use:
In liquid-based electrolytes: typically 0.15-0.2M of Co(II) and ca. 0.05M Co(II)
In solid-state photovoltaic cells: up to 10 weight % added to the hole transport material system.Packaging5 g in poly bottleLegal InformationProduct of Greatcell Solar®.
Greatcell Solar is a registered trademark of Greatcell SolarПараметрыassay 98% Quality Level 100, form powder mp 362 °C SMILES string F[P-](F)(F)(F)(F)F.F[P-](F)(F)(F)(F)F.N1(C2=NC=CC=C2)N=CC=C1.C3(N4C=CC=N4)=CC=CC=N3.C5(N6C=CC=N6)=CC=CC=N5.[Co+2] InChI 1S/3C8H7N3.Co.2F6P/c3*1-2-5-9-8(4-1)11-7-3-6-10-11;;2*1-7(2,3,4,5)6/h3*1-7H;;;/q;;;+2;2*-1 Inchi Key MLELXRWOHQBFBO-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H317 - H319 - H335 pcodes P280 - P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FK 102 Co(II) TFSI salt 805246-5G
Empirical Formula (Hill Notation): C28H21CoN11O8S4F12 Molecular Weight: 1054.71 PubChem Substance ID: 329768923 NACRES: NA.23 ApplicationUse this cobalt complexes to increase photovoltages of liquid electrolyte cells substantially or to achieve ultrahigh performance with solid state photovoltaic devices.
FK102 cobalt complexes offer guaranteed performance, high reproducibility, consistent results and are of highest purity. In comparison to triiodide-based redox electrolytes, cobalt complexes in general increase photovoltages and particularly at lower light levels (e.g. for indoor applications), significantly increase device power output.
Recommended use:
In liquid-based electrolytes: typically 0.15-0.2M of Co(II) and ca. 0.05M Co(II)
In solid-state photovoltaic cells: up to 10 weight % added to the hole transport material system.Packaging5 g in poly bottleLegal InformationProduct of Greatcell Solar®.
Greatcell Solar is a registered trademark of Greatcell SolarПараметрыassay 98% Quality Level 100, form powder mp 167 °C SMILES string O=S([N-]S(=O)(C(F)(F)F)=O)(C(F)(F)F)=O.N1(C2=NC=CC=C2)N=CC=C1.C3(N4C=CC=N4)=CC=CC=N3.C5(N6C=CC=N6)=CC=CC=N5.C
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H317 - H319 - H335 pcodes P280 - P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FK 102 Co(III) PF6 salt 805254-5G
Empirical Formula (Hill Notation): C24H21CoF18N9P3 CAS Number: 1346416-71-4 Molecular Weight: 929.31 PubChem Substance ID: 329768924 NACRES: NA.23 General descriptionFK 102 Co(III) PF6 salt (FK 102) is a cobalt based p type dopant that is used in chemical doping of triarylamine based hole conductors. It can be used in the fabrication of dye sensitized solar cells (DSSCs). It has a redox potential of 1.06 V and shows no absorption in the visible region.ApplicationUse this cobalt complexes to increase photovoltages of liquid electrolyte cells substantially or to achieve ultrahigh performance with solid state photovoltaic devices.
FK102 cobalt complexes offer guaranteed performance, high reproducibility, consistent results and are of highest purity. In comparison to triiodide-based redox electrolytes, cobalt complexes in general increase photovoltages and particularly at lower light levels (e.g. for indoor applications), significantly increase device power output.
Recommended use:
In liquid-based electrolytes: typically 0.15-0.2 M of Co(II) and ca. 0.05 M Co(II)
In solid-state photovoltaic cells: up to 10 weight % added to the hole transport material system.Packaging5 g in poly bottleLegal InformationProduct of Greatcell Solar®
Greatcell Solar is a registered trademark of Greatcell SolarПараметрыQuality Level 100, description Carbon: 28.5%-30.1%, Nitrogen: 12.5% - 13.2% assay >98% form powder SMILES string N1(C2=NC=CC=C2)N=CC=C1.C3(N4C=CC=N4)=CC=CC=N3.C5(N6C=CC=N6)=CC=CC=N5.C
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H317 - H319 - H335 pcodes P280 - P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FK 102 Co(III) TFSI salt 805203-5G
Empirical Formula (Hill Notation): C30H21CoN12O12S6F18 Molecular Weight: 1334.86 PubChem Substance ID: 329768920 NACRES: NA.23 General descriptionFK 102 Co(III) TFSI salt is a cobalt(III) complex that can be used as a p-type dopant to control the type and density of charge carriers in both organic and inorganic semiconductors. The solubility of TFSI allows an increase in the doping potential for hole-conductors in electrochemical devices.ApplicationFK 102 Co(III) TFSI salt can be majorly used in the fabrication of dye sensitized solar cells (DSSCs) and perovskite based solar cells (PSCs).
Use this cobalt complexes to increase photovoltages of liquid electrolyte cells substantially or to achieve ultrahigh performance with solid state photovoltaic devices. FK102 cobalt complexes offer guaranteed performance, high reproducibility, consistent results, and are of highest purity. In comparison to triiodide-based redox electrolytes, cobalt complexes in general increase photovoltages and particularly at lower light levels(e.g. for indoor applications), significantly increase device power output.
Recommended use:
In liquid-based electrolytes: typically 0.15-0.2 M of Co(II) and ca. 0.05 M Co(II)
In solid-state photovoltaic cells: up to 10 weight % added to the hole transport material system.Packaging5 g in poly bottleLegal InformationProduct of Dyesol®
Dyesol is a registered trademark of Greatcell SolarПараметрыassay 98% Quality Level 100, form powder mp 194-199 °C SMILES string O=S([N-]S(=O)(C(F)(F)F)=O)(C(F)(F)F)=O.O=S([N-]S(=O)(C(F)(F)F)=O)(C(F)(F)F)=O.O=S([N-]S(=O)(C(F)(F)F)=O)(C(F)(F)F)=O.N1(C2=NC=CC=C2)N=CC=C1.C3(N4C=CC=N4)=CC=CC=N3.C5(N6C=CC=N6)=CC=CC=N5.[Co+3] InChI 1S/3C8H7N3.3C2F6NO4S2.Co/c3*1-2-5-9-8(4-1)11-7-3-6-10-11;3*3-1(4,5)14(10,11)9-15(12,13)2(6,7)8;/h3*1-7H;;;;/q;;;3*-1;+3 Inchi Key ILXRZLQXWLMDFQ-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FK 209 Co(II) PF6 salt 805378-5G
Empirical Formula (Hill Notation): C36H45CoF12N9P2 Molecular Weight: 952.66 PubChem Substance ID: 329768933 ApplicationUse this cobalt complexes to increase photovoltages of liquid electrolyte cells substantially or to achieve ultrahigh performance with solid state photovoltaic devices.Packaging5 g in poly bottleLegal InformationProduct of Greatcell Solar®
Greatcell Solar is a registered trademark of Greatcell SolarПараметрыassay 98% Quality Level 100, form powder mp 295 °C SMILES string CC(C)(C)C1=CC=NC(N2C=CC=N2)=C1.CC(C)(C)C3=CC=NC(N4C=CC=N4)=C3.CC(C)(C)C5=CC=NC(N6C=CC=N6)=C5.F[P-](F)(F)(F)(F)F.F[P-](F)(F)(F)(F)F.[Co+2] InChI 1S/3C12H15N3.Co.2F6P/c3*1-12(2,3)10-5-7-13-11(9-10)15-8-4-6-14-15;;2*1-7(2,3,4,5)6/h3*4-9H,1-3H3;;;/q;;;+2;2*-1 Inchi Key WPDRYCGEGGZAAO-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H317 - H319 - H335 pcodes P280 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FK 209 Co(II) TFSI salt 805386-5G
Empirical Formula (Hill Notation): C40H45CoF12N11O8S4 Molecular Weight: 1223.03 PubChem Substance ID: 329768934 NACRES: NA.23 ApplicationUse this cobalt complexes to increase photovoltages of liquid electrolyte cells substantially or to achieve ultrahigh performance with solid state photovoltaic devices.Packaging5 g in poly bottleLegal InformationProduct of Greatcell Solar®
Greatcell Solar is a registered trademark of Greatcell SolarПараметрыassay 98% Quality Level 100, form powder mp 207 °C SMILES string O=S([N-]S(=O)(C(F)(F)F)=O)(C(F)(F)F)=O.O=S([N-]S(=O)(C(F)(F)F)=O)(C(F)(F)F)=O.CC(C)(C)C1=CC(N2N=CC=C2)=NC=C1.CC(C)(C)C3=CC=NC(N4C=CC=N4)=C3.CC(C)(C)C5=CC=NC(N6C=CC=N6)=C5.[Co+2] InChI 1S/3C12H15N3.2C2F6NO4S2.Co/c3*1-12(2,3)10-5-7-13-11(9-10)15-8-4-6-14-15;2*3-1(4,5)14(10,11)9-15(12,13)2(6,7)8;/h3*4-9H,1-3H3;;;/q;;;2*-1;+2 InChI key CUSFJXUEEGOGPG-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H317 - H319 - H335 pcodes P280 - P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FK 209 Co(III) PF6 salt 805408-5G
Empirical Formula (Hill Notation): C36H45CoF18N9P3 Molecular Weight: 1097.63 PubChem Substance ID: 329768936 NACRES: NA.23 ApplicationUse this cobalt complexes to increase photovoltages of liquid electrolyte cells substantially or to achieve ultrahigh performance with solid state photovoltaic devices.Packaging5 g in poly bottleLegal InformationProduct of Greatcell Solar®
Greatcell Solar is a registered trademark of Greatcell SolarПараметрыassay 98% Quality Level 100, form powder SMILES string CC(C)(C)C1=CC(N2N=CC=C2)=NC=C1.CC(C)(C)C3=CC=NC(N4C=CC=N4)=C3.CC(C)(C)C5=CC=NC(N6C=CC=N6)=C5.[Co+3] InChI 1S/3C12H15N3.Co/c3*1-12(2,3)10-5-7-13-11(9-10)15-8-4-6-14-15;/h3*4-9H,1-3H3;/q;;;+3 Inchi Key GECNGXUHOILCGK-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H317 - H319 - H335 pcodes P280 - P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FK 209 Co(III) TFSI salt 805394-5G
Empirical Formula (Hill Notation): C42H45CoF18O12N12S6 Molecular Weight: 1503.17 PubChem Substance ID: 329768935 NACRES: NA.23 General descriptionFK 209 Co(III) TFSI salt (FK 209) is a Co(III) based complex that is used as a p-type dopant for the hole transporting material with a power conversion efficiency in the range of 9-12%.ApplicationUse this cobalt complexes to increase photovoltages of liquid electrolyte cells substantially or to achieve ultrahigh performance with solid state photovoltaic devices.
FK 209 can be used to induce a p-doping on PCDTBT and spiro-OMeTAD, which can be used as hole transporting materials in the fabrication of perovskite solar cells (PSCs) with an efficiency of 15-16%.Packaging5 g in poly bottleLegal InformationProduct of Greatcell Solar®
Greatcell Solar is a registered trademark of Greatcell SolarПараметрыassay 98% Quality Level 100 form powder mp 281.5 °C (exp.) SMILES string O=S([N-]S(=O)(C(F)(F)F)=O)(C(F)(F)F)=O.O=S([N-]S(=O)(C(F)(F)F)=O)(C(F)(F)F)=O.O=S([N-]S(=O)(C(F)(F)F)=O)(C(F)(F)F)=O.CC(C)(C)C1=CC(N2N=CC=C2)=NC=C1.CC(C)(C)C3=CC=NC(N4C=CC=N4)=C3.CC(C)(C)C5=CC=NC(N6C=CC=N6)=C5.C
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H317 - H319 - H335 pcodes P280 - P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FK 269 Co(II) PF6 salt 805548-5G
Empirical Formula (Hill Notation): C22H18CoF12N10P2 Molecular Weight: 771.31 PubChem Substance ID: 329768945 NACRES: NA.23 Application- Use this cobalt complexes to increase photovoltages of liquid electrolyte cells substantially or to achieve ultrahigh performance with solid state photovoltaic devices, such as perovskite and dye-sensitized solar cells.
- FK 269 cobalt complexes offer guaranteed performance, high reproducibility, consistent results and are of highest purity. In comparison to triiodide-based redox electrolytes, cobalt complexes in general increase photovoltages and particularly at lower light levels (e.g. for indoor applications), significantly increase device power output.
Packaging5 g in poly bottleLegal InformationProduct of Greatcell Solar®
Greatcell Solar is a registered trademark of Greatcell SolarПараметрыassay 98% Quality Level 100, form powder color orange SMILES string C1(N2N=CC=C2)=CC=CC(N3C=CC=N3)=N1.N4(C5=NC(N6N=CC=C6)=CC=C5)N=CC=C4.[Co+2] InChI 1S/2C11H9N5.Co/c2*1-4-10(15-8-2-6-12-15)14-11(5-1)16-9-3-7-13-16;/h2*1-9H;/q;;+2 InChI key NBVQBBQINYIIFF-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H317 - H319 - H335 pcodes P280 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FK 269 Co(II) TFSI salt 805815-5G
Empirical Formula (Hill Notation): C26H18CoN12O8S4F12 Molecular Weight: 1041.67 PubChem Substance ID: 329768962 ApplicationUse this cobalt complexes to increase photovoltages of liquid electrolyte cells substantially or to achieve ultrahigh performance with solid state photovoltaic devices, such as perovskite and dye-sensitized solar cells.
FK 269 cobalt complexes offer guaranteed performance, high reproducibility, consistent results, and are of highest purity. In comparison to triiodide-based redox electrolytes, cobalt complexes in general increase photovoltages and, particularly at lower light levels (e.g. for indoor applications), significantly increase device power output.Packaging5 g in poly bottleLegal InformationProduct of Dyesol®
Dyesol is a registered trademark of Greatcell SolarПараметрыassay 98% Quality Level 100, form powder mp 188 °C SMILES string O=S([N-]S(=O)(C(F)(F)F)=O)(C(F)(F)F)=O.O=S([N-]S(=O)(C(F)(F)F)=O)(C(F)(F)F)=O.C1(N2N=CC=C2)=CC=CC(N3C=CC=N3)=N1.N4(C5=NC(N6N=CC=C6)=CC=C5)N=CC=C4.[Co+2] InChI 1S/2C11H9N5.2C2F6NO4S2.Co/c2*1-4-10(15-8-2-6-12-15)14-11(5-1)16-9-3-7-13-16;2*3-1(4,5)14(10,11)9-15(12,13)2(6,7)8;/h2*1-9H;;;/q;;2*-1;+2 InChI key IYOKUFSLXXBXHL-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H317 - H319 - H335 pcodes P280 - P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FK 269 Co(III) PF6 salt 805521-5G
Empirical Formula (Hill Notation): C22H18CoF18N10P3 Molecular Weight: 916.27 PubChem Substance ID: 329768944 NACRES: NA.23 ApplicationUse this cobalt complexes to increase photovoltages of liquid electrolyte cells substantially or to achieve ultrahigh performance with solid state photovoltaic devices, such as perovskite and dye-sensitized solar cells.
FK 269 cobalt complexes offer guaranteed performance, high reproducibility, consistent results, and are of highest purity. In comparison to triiodide-based redox electrolytes, cobalt complexes in general increase photovoltages and, particularly at lower light levels (e.g. for indoor applications), significantly increase device power output.Packaging5 g in poly bottleLegal InformationProduct of Greatcell Solar®
Greatcell Solar is a registered trademark of Greatcell SolarПараметрыassay 98% Quality Level 100, form powder mp 355 °C SMILES string F[P-](F)(F)(F)(F)F.F[P-](F)(F)(F)(F)F.F[P-](F)(F)(F)(F)F.C1(N2N=CC=C2)=CC=CC(N3C=CC=N3)=N1.N4(C5=NC(N6N=CC=C6)=CC=C5)N=CC=C4.[Co+3] InChI 1S/2C11H9N5.Co.3F6P/c2*1-4-10(15-8-2-6-12-15)14-11(5-1)16-9-3-7-13-16;;3*1-7(2,3,4,5)6/h2*1-9H;;;;/q;;+3;3*-1 Inchi Key GCYMTAFZAULUPX-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H317 - H319 - H335 pcodes P280 - P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FK 269 Co(III) TFSI salt 805807-5G
Empirical Formula (Hill Notation): C28H18CoF18N13O12S6 Molecular Weight: 1321.82 PubChem Substance ID: 329768961 NACRES: NA.23 ApplicationUse this cobalt complexes to increase photovoltages of liquid electrolyte cells substantially or to achieve ultrahigh performance with solid state photovoltaic devices, such as perovskite and dye-sensitized solar cells
FK269 cobalt complexes offer guaranteed performance, high reproducibility, consistent results, and are of highest purity. In comparison to triiodide-based redox electrolytes, cobalt complexes in general increase photovoltages and, particularly at lower light levels (e.g. for indoor applications), significantly increase device power output.Packaging5 g in poly bottleLegal InformationProduct of Greatcell Solar®
Greatcell Solar is a registered trademark of Greatcell SolarПараметрыassay 98% Quality Level 100, form powder mp 169.5 °C SMILES string O=S([N-]S(=O)(C(F)(F)F)=O)(C(F)(F)F)=O.C1(N2N=CC=C2)=CC=CC(N3C=CC=N3)=N1.N4(C5=NC(N6N=CC=C6)=CC=C5)N=CC=C4.[Co+3] InChI 1S/2C11H9N5.C2F6NO4S2.Co/c2*1-4-10(15-8-2-6-12-15)14-11(5-1)16-9-3-7-13-16;3-1(4,5)14(10,11)9-15(12,13)2(6,7)8;/h2*1-9H;;/q;;-1;+3 InChI key ZURJMCGADUHLSF-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H317 - H319 - H335 pcodes P280 - P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
FTTF 754056-250MG
Empirical Formula (Hill Notation): C34H22S2 CAS Number: 369599-41-7 Molecular Weight: 494.67 Параметрыgrade sublimed grade Quality Level 100, loss 0.5 wt. % TGA, 300 °C mp 366-376 °C semiconductor properties P-type (mobility=0.3 cm2/V·s) SMILES string C1c2ccccc2-c3ccc(cc13)-c4ccc(s4)-c5ccc(s5)-c6ccc-7c(Cc8ccccc-78)c6
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
High surface area conducting polyaniline 912891-2G
ApplicationThis polyaniline product is crosslinked by a dopant molecule - phytic acid, to form a highly porous 3D nanostructure. It is intrinsically conductive and has large open channels advantageous for sensing and energy storage applications. These open micro/nano channels promote the transport of electrons and facilitates the diffusion of ions, and small molecules. Additionally, pyrolyzing this polyaniline could yield highly porous 3D cross-linked graphitic carbon for a broad range of applications.Параметрыdescription Electrochemical activity: see picture Quality Level 100, form solid solubility water: insoluble (swell into hydrogel)
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
High surface area conducting polypyrrole 912573-2G
ApplicationThree-dimensionally cross-linked polypyrrole (3D cross-linked polypyrrole) is a conductive powder made by crosslinking polypyrrole with a dopant molecule - phytic acid. It can form intrinsically conductive hydrogels with a hierarchically porous microstructure. Its porosity promotes transport of electrons and facilitates the diffusion of ions and other small molecules. Its flexibility can also help accommodate the strain caused by volume change during electrochemical cycling. Together with the advantage of high surface area, and biocompatibility, this material provides the feasibility for fabricating flexible, lightweight, energy and bioelectronic devices. Three-dimensionally cross-linked polypyrrole can also been derived into porous carbon nanomaterials via post thermal treatment and activation. The resulted carbon matrix has maintained the hierarchical nanostructure of 3D cross-linked polypyrrole and has been demonstrated as an effective additive to improve energy storage and conversion performance of other electrochemically active materials.Параметрыdescription Electrochemical activity: see attached CV result Quality Level 100, form solid color black solubility soluble (swell into hydrogel but does not dissolve in water)
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
High-performance silicon anode 912409-5G
ApplicationSilicon is a most promising next generation lithium ion battery electrode material, due to its ~10 times higher specific capacity (3600 mAh/g) than graphite (372 mAh/g). However, silicon experiences large volume change (~400%) during lithium insertion, causing it to fracture and detach from current collector, rendering prototypical lithium-silicon batteries to lose most of their capacity in less than 10 charge-discharge cycles. A solution to the capacity and stability issues posed by the significant volume expansion upon lithiation of silicon is critical to the success of high capacity lithium ion batteries.
This silicon/PANi composite utilizes a doped, intrinsically conductive, 3D cross-linked polyaniline as matrix, which could function as both the conductive binder and the polymer electrolyte for silicon-based electrodes. Previous study for a similar silicon-based three-dimensional conducting polymer composite demonstrated increased electrochemically performance due to short diffusion paths and good 3D connectivity, and resulted in a marked improvement in cyclability, with over 90% capacity retention after 5,000 cycles.
This composite is made by encapsulating silicon particles in an in-situ polymerized 3D-crosslinked conductive polyaniline framework. This Si/PANi composite not only allows fast electrical and ionic transport, but also provides free space to allow giant volume expansion. This Si/PANi composite provides a ready-to-use electrochemically active silicon composite that would increase the capacity of conventional lithium ion battery, and improve the cycle-life of Si-based anodes.ПараметрыQuality Level 100, form solid
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
High-performance silicon anode 918334-2G
ApplicationSilicon is a most promising next generation lithium ion battery electrode material but it suffers poor cyclability due to the volume expansion that results in loss of electrical contact and unstable SEI.
This Si composite product is made by encapsulating nano-Si particles in the 3D cross-linked conductive polymer framework. It not only allows fast electrical and ionic transport, but also provides free space to allow giant volume expansion. This Si composite provides a ready-to-use electrochemically active nano-Si anode that would increase the capacity of conventional lithium ion battery, and improve the cycle-life performance of Si-based anodes.ПараметрыQuality Level 100, form powder color dark
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Hyflon® AD 40H
Linear Formula: (C4F6O3)n(C2F4)m CAS Number: 161611-79-6
Кат. номер 900902-1G 900902-5G ApplicationHyflon® AD 40H is an amorphous perfluoropolymer available in powder form.- Amorphous glassy polymer structure.
- Solubility in perfluorinated solvents.
- Low dielectric constant of 2.0 at 1 kHz.
- Excellent optical properties:
- Low refractive index.
Hyflon® AD can provide uniform and thin films or coatings (down to submicron thickness if required) by casting or coating techniques and thermal treatments, well below the typical baking temperatures of semicrystalline perfluoropolymers.
Key features of Hyflon® AD amorphous perfluoropolymers:- High temperature stability.
- Good chemical resistance.
- Excellent hydrophobicity.
- Very low surface energy.
- Low dielectric constant.
- Very high gas permeability and selectivity.
- Outstanding optical properties (e.g. high UV transmittance, low refractive index).
Examples of typical applications include:- Protective coatings.
- Interlayer dielectric films and pellicles for electronics.
Legal InformationHyflon is a registered trademark of Solvay GroupПараметрыdescription Glass Transition Temperature: 90 °C (ASTM D3418), Specific gravity: 1.98 (ASTM D792) Quality Level 100, form powder composition TTD content, 40 mol % ±5 mol % by refractive index n/D 1.331 (ASTM D542) intrinsic viscosity 120 cm3/g±30 cm3/g(30 °C) (ASTM D2857)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Hyflon® AD 40H S 900899-50G
Linear Formula: (C4F6O3)n(C2F4)m CAS Number: 161611-79-6 NACRES: NA.23 General descriptionHyflon® AD 40H S is a commerical grade Hyflon® AD 40H perfluoropolymer solution in a perfluorinated solvent. This can be considered ready-to-use solution suitable for application in the most demanding solution process technologies.- Amorphous glassy polymer structure.
- Solubility in perfluorinated solvents.
- Low dielectric constant of 2.0 at 1 kHz.
Excellent optical properties:- High UV transmittance.
- Low refractive index.
Hyflon® AD can provide uniform and thin films or coatings (down to submicron thickness if required) by casting or coating techniques and thermal treatments, well below are the typical baking temperatures of semicrystalline perflouropolymers.
Key features of Hyflon® AD amorphous perfluoropolymers:- High temperature stability.
- Good chemical resistance.
- Excellent hydrophobicity.
- Very low surface energy.
- Low dielectric constant.
- Very high gas permeability and selectivity.
- Outstanding optical properties (e.g. high UV transmittance, low refractive index).
Examples of typical applications include:- Protective coatings.
- Interlayer dielectric films and pellicles for electronics.
Legal InformationGalden is a registered trademark of Solvay Group
Hyflon is a registered trademark of Solvay GroupПараметрыQuality Level 100, description Polymer content: Hyflon® AD 40H 2.5 ± 0.5 wt%, Solution in perfluorinated solvent (Galden® D02TS) composition TTD content, 40 ±5 mol % by transmittance 480-800 nm, >95% viscosity 250 cP(25 °C, Brookfield)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F 171.0 °F Flash Point C 77.22 °C Узнать цену -
Hyflon® AD 40H SF 900897-50G
Linear Formula: (C4F6O3)n(C2F4)m CAS Number: 161611-79-6 General descriptionHyflon® AD 40H SF is a high purity Hyflon® AD 40H perfluoropolymer solution in a perfluorinated solvent. This can be considered ready-to-use solution suitable for application in the most demanding solution process technologies.- Amorphous glassy polymer structure.
- Solubility in perfluorinated solvents.
- Low dielectric constant of 2.0 at 1 kHz.
Excellent optical properties:- High UV transmittance.
- Low refractive index.
Hyflon® AD can provide uniform and thin films or coatings (down to submicron thickness if required) by casting or coating techniques and thermal treatments, well below the typical baking temperatures of semicrystalline perflouropolymers.
Key features of Hyflon® AD amorphous perfluoropolymers:- High temperature stability.
- Good chemical resistance.
- Excellent hydrophobicity.
- Very low surface energy.
- Low dielectric constant.
- Very high gas permeability and selectivity.
- Outstanding optical properties (e.g. high UV transmittance, low refractive index).
Examples of typical applications include:- Protective coatings.
- Interlayer dielectric films and pellicles for electronics.
Legal InformationGalden is a registered trademark of Solvay Group
Hyflon is a registered trademark of Solvay GroupПараметрыQuality Level 100, description Polymer content: Hyflon® AD 40H 2.0 ± 0.5 wt%, Solution in perfluorinated solvent (Galden® D02TS) composition TTD content, 40 ±5 mol % by transmittance 480-800 nm, >99% viscosity 80 cP(25 °C, Brookfield)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Hyflon® AD 40L
Linear Formula: (C4F6O3)n(C2F4)m CAS Number: 161611-79-6 NACRES: NA.23
Кат. номер 900901-5G 900901-1G General descriptionHyflon® AD 40L is an amorphous perfluoropolymer available in powder form.- Amorphous glassy polymer structure.
- Solubility in perfluorinated solvents.
- Low dielectric constant of 2.0 at 1 kHz.
Excellent optical properties- High UV transmittance.
- Low refractive index.
Hyflon® AD can provide uniform and thin films or coatings (down to submicron thickness if required) by casting or coating techniques and thermal treatments, well below the typical baking temperatures of semicrystalline perflouropolymers.
Key features of Hyflon® AD amorphous perfluoropolymers:- High temperature stability.
- Good chemical resistance.
- Excellent hydrophobicity.
- Very low surface energy.
- Low dielectric constant.
- Very high gas permeability and selectivity.
- Outstanding optical properties (e.g. high UV transmittance, low refractive index).
Examples of typical applications include:- Protective coatings.
- Interlayer dielectric films and pellicles for electronics.
Legal InformationHyflon is a registered trademark of Solvay GroupПараметрыdescription Specific gravity: 1.98 (ASTM D792) Quality Level 100, form powder composition TTD content, 40 ±5 mol % by intrinsic viscosity parameters 40 ±10 cc/g, 30 °C (ASTM D2857) refractive index n/D 1.331 (ASTM D542) transition temp transition temp 90 °C (ASTM D3418, Glass)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Hyflon® AD 40L S 900898-25G
Linear Formula: (C4F6O3)n(C2F4)m CAS Number: 161611-79-6 NACRES: NA.23 General description- Hyflon® AD 40L S is a commerical grade Hyflon® AD 40H perfluoropolymer solution in a perfluorinated solvent. This can be considered ready-to-use solution suitable for application in the most demanding solution process technologies. Amorphous glassy polymer structure.
- Solubility in perfluorinated solvents.
- Low dielectric constant of 2.0 at 1 kHz.
- Excellent optical properties:
b) Low refractive index.
Hyflon® AD can provide uniform and thin films or coatings (down to submicron thickness if required) by casting or coating techniques and thermal treatments, well below the typical baking temperatures of semicrystalline perflouropolymers.
Key features of Hyflon® AD amorphous perfluoropolymers:- High temperature stability.
- Good chemical resistance.
- Excellent hydrophobicity.
- Very low surface energy.
- Low dielectric constant.
- Very high gas permeability and selectivity.
- Outstanding optical properties (e.g. high UV transmittance, low refractive index).
Examples of typical applications include:- Protective coatings.
- Interlayer dielectric films and pellicles for electronics.
Legal InformationGalden is a registered trademark of Solvay Group
Hyflon is a registered trademark of Solvay GroupПараметрыdescription Polymer content: Hyflon® AD 40L 9.0 ± 0.5 wt%, Solution in perfluorinated solvent (Galden® D02TS) Quality Level 100, composition TTD content, 40 ±5 mol % by transmittance >95% (in UV-Vis range) viscosity 600 cP(25 °C, Brookfield)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Hyflon® AD 40L SF 900896-25G
Linear Formula: (C4F6O3)n(C2F4)m CAS Number: 161611-79-6 ApplicationHyflon® AD 40L SF is a high purity Hyflon® AD 40L perfluoropolymer solution in a perfluorinated solvent.
This can be considered ready-to-use solution suitable for application in the most demanding solution process technologies:- Amorphous glassy polymer structure.
- Solubility in perfluorinated solvents.
- Low dielectric constant of 2.0 at 1 kHz.
- Excellent optical properties:
- High UV transmittance.
- Low refractive index.
Hyflon® AD can provide uniform and thin films or coatings (down to submicron thickness if required) by casting or coating techniques and thermal treatments, well below are the typical baking temperatures of semicrystalline perfluoropolymers.
Key features of Hyflon® AD amorphous perfluoropolymers:- High temperature stability.
- Good chemical resistance.
- Excellent hydrophobicity.
- Very low surface energy.
- Low dielectric constant.
- Very high gas permeability and selectivity.
- Outstanding optical properties (e.g. high UV transmittance, low refractive index).
Examples of typical applications include:- Protective coatings.
- Interlayer dielectric films and pellicles for electronics.
Legal InformationGalden is a registered trademark of Solvay Group
Hyflon is a registered trademark of Solvay GroupПараметрыdescription Form: solution in perfluorinated solvent (Galden® D02TS) Quality Level 100, composition Polymer composition: TTD content, 40 mol % ±5 mol % by , Polymer content: Hyflon® AD 40L, 9.0 wt. % ±0.5 wt. % by transmittance >99% (in UV-Vis range) viscosity 310 cP(25 °C) (Brookfield)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Hyflon® AD 60
Linear Formula: (C4F6O3)n(C2F4)m CAS Number: 161611-79-6
Кат. номер 900900-5G 900900-1G General descriptionHyflon® AD 60 is an amorphous perfluoropolymer available in powder form.- Amorphous glassy polymer structure.
- Solubility in perfluorinated solvents.
- Very high gas permeability and selectivity.
Hyflon® AD can provide uniform and thin films or coatings (down to submicron thickness if required) by casting or coating techniques and thermal treatments, well below the typical baking temperatures of semicrystalline perflouropolymers.
Key features of Hyflon® AD amorphous perfluoropolymers:- High temperature stability.
- Good chemical resistance.
- Excellent hydrophobicity.
- Very low surface energy.
- Low dielectric constant.
- Very high gas permeability and selectivity.
- Outstanding optical properties (e.g. high UV transmittance, low refractive index).
Examples of typical applications include:- Protective coatings.
- Interlayer dielectric films and pellicles for electronic membranes.
Legal InformationHyflon is a registered trademark of Solvay GroupПараметрыdescription Specific gravity: 1.93 (ASTM D792) Quality Level 100, form powder composition TTD content, 60 ±5 mol % by intrinsic viscosity parameters 40 ±10 cc/g, 30 °C (ASTM D2857) refractive index n/D 1.327 (ASTM D542) transition temp transition temp 125 °C (ASTM D3418, glass)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
ICBA 753955-250MG
Empirical Formula (Hill Notation): C78H16 CAS Number: 1207461-57-1 Molecular Weight: 952.96 NACRES: NA.23 General descriptionICBA is a C60 derivative that can be synthesized from C60 and indene. It is an acceptor material with shallow lowest occupied molecular orbital(LUMO) which can be used to enhance the performance of polymeric solar cells(PSCs).
The performance of indene-C60 bisadduct (ICBA) as organic solar cell (OSC) has been described in a study. Simple preparation and high solubility inorganic solvents renders ICBA as an efficient substitute to [6,6]-phenyl-C61 butyric acid methyl ester (PCBM).ApplicationICBA can be used with poly(3-hexylthiophene)(P3HT) as an active layer which can be used in the fabrication of organic solar cells(OSCs).ICBA in combination with thiazolo-thiazolo can be used as a donor. It can be blended with PCBM for photovoltaic based application.
A ternary bulk heterojunction system (BHJ) may be fabricated with ICBA low band gap polymer, for IR sensitized organic solar cells. 1-3ICBA/thiazolo-thiazolo donor polymer blend may be used to enhance the charge generation in BHJ solar cells.Packaging250 mg in glass insertПараметрыQuality Level 100, assay 99% (HPLC) loss 0.5 wt. % TGA, 235 °C mp 253-260 °C Orbital energy LUMO 3.67 eV (CV) OPV Device Performance ITO/PEDOT:PSS/P3HT: ICBA (1:1)/Al - Short-circuit current density (Jsc): 10.82 mA/cm2
- Open-circuit voltage (Voc): 0.78 V
- Fill Factor (FF): 0.56
- Power Conversion Efficiency (PCE): 4.65 %
- Short-circuit current density (Jsc): 10.53 mA/cm2
- Open-circuit voltage (Voc): 0.83 V
- Fill Factor (FF): 0.60
- Power Conversion Efficiency (PCE): 5.26 %
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
ICMA 753947-250MG
Empirical Formula (Hill Notation): C69H8 CAS Number: 186682-36-0 Molecular Weight: 836.80 NACRES: NA.23 General descriptionDipole moment of indene-C60 monoadduct (ICMA) was estimated to be 2.34 debye. Film formation of ICMA under optimum conditions was studied.1 As a potential candidate for field effect transistors (FETs), ICMA exhibits unipolar n-channel characteristics and high electron mobility.Packaging250 mg in glass insertПараметрыQuality Level 100, assay 97% (HPLC) loss 0.5 wt. %, 390 °C mp 320-340 °C Orbital energy LUMO 3.84 eV (CV) OPV Device Performance ITO/PEDOT:PSS/P3HT: ICMA (1:1)/Al - Short-circuit current density (Jsc): 10.56 mA/cm2
- Open-circuit voltage (Voc): 0.69 V
- Fill Factor (FF): 0.54
- Power Conversion Efficiency (PCE): 3.92 %
- Short-circuit current density (Jsc): 9.66 mA/cm2
- Open-circuit voltage (Voc): 0.65 eV
- Fill Factor (FF): 0.59
- Power Conversion Efficiency (PCE): 3.65 %
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
IDT-2Br 910635-100MG
Empirical Formula (Hill Notation): C88H88N6O2S8 CAS Number: 2042521-91-3 Molecular Weight: 1518.20 General descriptionNon-fullerene acceptors (NFAs) are currently a major focus of research in the development of bulk-heterojunction organic solar cells (OSCs). In contrast to the widely used fullerene acceptors (FAs), the optical properties and electronic energy levels of NFAs can be designed and readily tuned. NFA-based OSCs can also achieve greater thermal stability and photochemical stability, as well as longer device lifetimes, than their FA-based counterparts.Recent developments have led to a rapid increase in power conversion efficiencies for NFA OSCs, with values now exceeding 15% in a single junction cell, and >17% for a tandem cell, demonstrating the viability of using NFAs to replace FAs in next-generation high-performance OSCs.ApplicationIDT-2BR is a medium-high bandgap nonfullerene acceptors (NFAs). It was reported that IDT-2BR could produce a high power conversion efficiency (PCE) of over 10% when used with low-bandgap p-type polymer PTB7-Th (Product No. 794333). A prominent feature of this blend is the very small energy loss (< 0.6 eV) in the cell, which allows for a very high open circuit voltages in the device (> 1 V).
Ternary blend organic solar cells (OSCs) with photoresponses beyond 1000 nm can be fabricated using PTB7-Th as donor and ultralow-bandgap F8IC and medium-high bandgap IDT-2BR as NFAs. A PCE of 12.1% has been achieved by such a ternary device with 20% IDT-2BR content in acceptors. In this work, IDT-2BR was found to contribute simultanously to the improvement of the open-circuit voltage (VOC), short-circuit (JSC) and fill factor (FF) of the PTB7-Th/F8IC blend, due to smaller energy offset for charge separation, suppressed charge recombination, and imporved light absorption. Improved packing due to the coexsitence of F8IC and IDT-2BR leads to higher mobilities and more balanced charge transport, which contribute to the improved FF as well.
Additionaly, blends with IDT-2BR have been found to be thermally stable at 150 Celsius.
A ternary blend using both IDT-2BR and fullerene based acceptor: PC71BM (Product No. 684465) has also reached a PCE over 12%.Параметрыdescription Band gap: 1.83 eV assay ≥99% form solid mol wt 1518.20 g/mol color dark solubility chloroform: soluble Orbital energy HOMO -5.52 eV , LUMO -3.69 eV
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
IEICO
Empirical Formula (Hill Notation): C114H118N4O4S4 CAS Number: 2055812-53-6 Molecular Weight: 1736.44
Кат. номер 913006-100MG 913006-250MG ApplicationIEICO is a high-performance narrow-bandgap non-fullerene acceptor (NFA) with a complementary absorption spectrum to many of the best medium to high bandgap OPV devices. This feature was used to create high-efficiency multi-layer tandem solar cells, reaching a PCE of nearly 14%. Over 11% PCE can be reached in single junction cells.ПараметрыQuality Level 100, description Band gap: Eg=1.34 eV assay ≥99% form solid color dark Orbital energy HOMO -5.32 eV , LUMO -3.95 eV
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
IEICO-4Cl 913774-100MG
Empirical Formula (Hill Notation): C114H114Cl4N4O4S4 CAS Number: 2240998-88-1 Molecular Weight: 1874.22 ApplicationIEICO-4Cl is a transparent, low-bandgap non-fullerene acceptor. It is a chlorinated derivative of IEICO, which imparts it with a lower optical bandgap and lower energy levels. The weak photon absorption in the visible spectrum of IEICO-4Cl, allows high-performance organic solar cells to be fabricated with outstanding transparency. Furthermore, changing the polymer acceptor pairing with IEICO-4Cl allows tuning of the color of the solar cell device fabricated.Параметрыdescription Band gap: Eg=1.27 eV Quality Level 100, assay ≥99% form solid color dark Orbital energy HOMO -5.56 eV , LUMO -4.23 eV
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
IEICO-4F 914029-100MG
Empirical Formula (Hill Notation): C114H114F4N4O4S4 CAS Number: 2089044-02-8 Molecular Weight: 1808.40 ApplicationIEICO-4F is an ultra-narrow bandgap non-fullerene acceptor (NFA). It is a derivative of IEICO with an absorption edge reaching 1000 nm. PCEs of over 10% in single layer devices were reached. A ternary blend of J52:PBDTTT-EFT donor polymers with IEICO-4F reached a PCE of >11%, with a very high photocurrent of over 25 mA cm-2.Параметрыdescription Band gap: Eg=1.29 eV Quality Level 100, assay ≥99% form solid color dark Orbital energy HOMO -5.49 eV , LUMO -4.19 eV
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Indeno[1,2-b]fluorene-6,12-dione
Empirical Formula (Hill Notation): C20H10O2 CAS Number: 5695-13-6 Molecular Weight: 282.29 MDL number: MFCD22666459 PubChem Substance ID: 329767500 NACRES: NA.23
Кат. номер 771503-5G 771503-1G ApplicationCore unit affording n-type organic semiconductors for n-type FET
Indeno[1,2-b]fluorene-6,12-dione is a semiconducting polymer that can be used as an acceptor molecule in the fabrication of organic electronic devices such as organic light emitting diodes (OLEDs) and organic field effect transistors (OFETs).Packaging1, 5 g in glass bottleПараметрыQuality Level 100, assay 99% form powder mp 350-354 °C SMILES string O=C1c2ccccc2-c3cc4C(=O)c5ccccc5-c4cc13 InChI 1S/C20H10O2/c21-19-13-7-3-1-5-11(13)15-9-18-16(10-17(15)19)12-6-2-4-8-14(12)20(18)22/h1-10H Inchi Key AAUHGKXJBZEARK-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H302 RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
ITIC
Empirical Formula (Hill Notation): C94H82N4O2S4 CAS Number: 1664293-06-4 Molecular Weight: 1427.94
Кат. номер 900799-50MG 900799-100MG ПараметрыQuality Level 100, description Band gap:1.61eV assay 99% form solid Orbital energy HOMO -5.5 eV , LUMO -3.89 eV SMILES string O=C1C2=C(C=CC=C2)C(/C1=C/C3=CC(S4)=C(S3)C5=C4C(C=C(C(C6=CC=C(CCCCCC)C=C6)(C7=CC=C(CCCCCC)C=C7)C8=C9SC%10=C8SC(/C=C%11C(C(C=CC=C%12)=C%12C\%11=O)=C(C#N)C#N)=C%10)C9=C%13)=C%13C5(C%14=CC=C(CCCCCC)C=C%14)C%15=CC=C(CCCCCC)C=C%15)=C(C#N)C#N
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
ITIC-Cl 906387-100MG
Empirical Formula (Hill Notation): C94H78Cl4N4O2S4 CAS Number: 2253663-81-7 Molecular Weight: 1565.72 General descriptionITCI-CI is a low band acceptor-donor-acceptor molecule with indacenodithieno[3,2b]thiophene (IT) as a central donor atom and 2(3oxo2,3dihydroinden1ylidene)malononitrile (IC) as an acceptor end group. It is also a non-fullerene electron acceptor with a push-pull structure that induces an intramolecular charge transfer and extends absorption.ApplicationITCI-CI can be mainly used in the fabrication of polymeric solar cells with an efficiency that is less than 11% and excellent thermal stability.
ITIC-Cl is a novel non-fullerene acceptor material designed to use in organic photovoltaic devices.ITIC-Cl is a derivative of the ITIC molecule, which is increasingly used to replace fullerene based derivatives for organic solar cells due to significantly improved performances and stability.Compared to ITIC and its other derivatives such as ITIC-F, ITIC-Cl has a narrower bandgap and lower energy levels, and thus will be more suitable to pair with various p-type polymers.ITIC-Cl is readily soluble in most organic solvents used to fabricate organic electronic devices.Параметрыdescription Band gap: 1.48 eV assay 98% form powder Orbital energy HOMO -5.68 eV , LUMO -4.20 eV
Safety InformationWGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
ITIC-DM
Empirical Formula (Hill Notation): C98H90N4O2S4 CAS Number: 2047352-92-9 Molecular Weight: 1484.05 NACRES: NA.23
Кат. номер 900803-50MG 900803-100MG Параметрыdescription Band gap: 2.16 eV Quality Level 100, assay 99% form solid solubility organic solvents: soluble Orbital energy HOMO -5.45 eV , LUMO -3.29 eV
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
ITIC-F 901423-100MG
Empirical Formula (Hill Notation): C94H78F4N4O2S4 CAS Number: 2097998-59-7 Molecular Weight: 1499.90 NACRES: NA.23 ApplicationITIC-F is a non-fullerene acceptor molecule, which can be used in the fabrication of organic solar cells (OSCs) and organic photovoltaics (OPVs).
ITIC-F is a derivative of ITIC possessing lower energy levels and a broader absorption spectrum. It is used as an n-type molecule for organic photovoltaics, allowing very high performances of over 13%.Параметрыdescription Band gap: 1.52 eV Quality Level 100, assay 97% form solid Orbital energy HOMO -5.66 eV , LUMO -4.14 eV
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
ITIC-M
Empirical Formula (Hill Notation): C96H86N4O2S4 Molecular Weight: 1456.00
Кат. номер 900947-100MG 900947-50MG Параметрыdescription Band gap: 1.6 eV Quality Level 100, assay ≥97% form solid solubility chloroform: soluble, dichlorobenzene: soluble Orbital energy HOMO -5.58 eV , LUMO -3.98 eV SMILES string O=C1C2=C(C=CC=C2)C(/C1=C/C3=CC(S4)=C(S3)C5=C4C(C=C(C(C6=CC=C(C=C6)CCCCCC)(C7=CC=C(C=C7)CCCCCC)C8=C9SC%10=C8SC(/C=C%11C(C(C=CC=C%12)=C%12C/%11=O)=C(C#N)C#N)=C%10)C9=C%13)=C%13C5(C%14=CC=C(C=C%14)CCCCCC)C%15=CC=C(C=C%15)CCCCCC)=C(C#N)C#N
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
ITIC-Th
Empirical Formula (Hill Notation): C86H74N4O2S8 CAS Number: 1889344-13-1 Molecular Weight: 1452.05
Кат. номер 900800-50MG 900800-100MG ПараметрыQuality Level 100, description Band gap: 1.73 eV assay 99% form solid solubility chlorobenzene: soluble, chloroform: soluble, dichlorobenzene: soluble Orbital energy HOMO -5.66 eV , LUMO -3.93 eV
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
J51 901058-100MG
Linear Formula: (C72H93F2N3S6)n CAS Number: 1393529-03-7 NACRES: NA.23 ПараметрыQuality Level 100, description Band gap: 1.99 eV mol wt Mw 40,000-80,000 by GPC (PS standard) solubility organic solvents: soluble (Soluble in chlorobenzene and dichlorobenzene, Limited solubility in CHCl3) Orbital energy HOMO -5.29 eV , LUMO -3.3 eV A PDI 2.03.0
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
J61 901045-100MG
Linear Formula: (C72H93F2N3S8)n CAS Number: 1887136-03-9 Параметрыdescription Band gap: 2.01 eV Quality Level 100, mol wt Mw 50,000-100,000 by GPC (PS standard) solubility organic solvents: soluble (Soluble in chlorobenzene and dichlorobenzene,Limited solubility in CHCl3) Orbital energy HOMO -5.22 eV , LUMO -3.21 eV A PDI 2.03.0
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
K19 Dye 791415-250MG
CAS Number: 847665-45-6 PubChem Substance ID: 329768273 NACRES: NA.23 General descriptionK19 Dye is an amphiphilic ruthenium sensitizer with a good molar extinction coefficient, which remains stable under thermal stress and light soaking. It can be synthesized by forming a reaction mixture of 4,4′-Bis(p-hexyloxystyryl)-2,2′-bipyridine, dichloro(p-cymene)ruthenium(II) dimer, and 4,4′-dicarboxylic acid-2,2′-bipyridine. It shows an overall power conversion efficiency (PCE) of 11% and can be used as an active material in electrochemical applications.ApplicationK19 Dye is an organo-metallic dye that can be used as a photosensitizing material in the fabrication of dye sensitized solar cells (DSSCs). It shows a short circuit photocurrent density of 15.1 mA/cm2, an open circuit voltage of 747 mV and a fill factor of 0.69.
Electron transfer from K-19 dye to the conduction band of Titania is completed within 20 fs while charge recombination has a half-life of 800 μs. The high extinction coefficient of this sensitizer enable realization of a new generation thin-film dye-sensitized solar cells (DSCs) yielding high conversion efficiency at full sunlight, even with viscous electrolytes based on ionic liqs. or nonvolatile solvents, making solar cell devices exhibit excellent stability under light soaking.Packaging250 mg in glass insertLegal InformationDyesol® Product. Dyesol is a registered trademark of Dyesol Ltd.
Dyesol is a registered trademark of Greatcell SolarПараметрыQuality Level 100, assay 85% (HPLC) form powder (black) mp >300 °C max 536, 357, 311 nm at 0.02 mM in DMF (lit.) SMILES string OC(C1=CC(C2=CC(C(O)=O)=CC=N2)=NC=C1)=O.S=C=N[Ru]N=C=S.CCCCCCOC(C=C3)=CC=C3/C=C/C4=CC=NC(C5=NC=CC(/C=C/C6=CC=C(OCCCCCC)C=C6)=C5)=C4 InChI 1S/C38H44N2O2.C12H8N2O4.2CNS.Ru/c1-3-5-7-9-27-41-35-19-15-31(16-20-35)11-13-33-23-25-39-37(29-33)38-30-34(24-26-40-38)14-12-32-17-21-36(22-18-32)42-28-10-8-6-4-2;15-11(16)7-1-3-13-9(5-7)10-6-8(12(17)18)2-4-14-10;2*2-1-3;/h11-26,29-30H,3-10,27-28H2,1-2H3;1-6H,(H,15,16)(H,17,18);;;/q;;2*-1;+2/b13-11+,14-12+;;;; InChI key HBARXZGSEMEPLK-BPSJQPAOSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H317 - H319 - H335 pcodes P280 - P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Merocyanine 540
Empirical Formula (Hill Notation): C26H32N3NaO6S2 CAS Number: 62796-23-0 Molecular Weight: 569.67 Beilstein/REAXYS Number: 3585252 MDL number: MFCD00013438 PubChem Substance ID: 24859412 NACRES: NA.23
Кат. номер 323756-100MG 323756-250MG ApplicationFluorescent axonal stain.Packaging100 mg in glass bottle
Bottomless glass bottle. Contents are inside inserted fused cone.Параметрыcomposition Dye content, 90% Quality Level 200, mp 285 °C (dec.) (lit.) max 555 nm fluorescence ex 555 nm; em 578 nm in methanol SMILES string [Na+].CCCCN1C(=O)C(=C\C=C\C=C2/Oc3ccccc3N2CCCS([O-])(=O)=O)\C(=O)N(CCCC)C1=S InChI 1S/C26H33N3O6S2.Na/c1-3-5-16-28-24(30)20(25(31)29(26(28)36)17-6-4-2)12-7-10-15-23-27(18-11-19-37(32,33)34)21-13-8-9-14-22(21)35-23;/h7-10,12-15H,3-6,11,16-19H2,1-2H3,(H,32,33,34);/q;+1/p-1/b10-7+,23-15-; Inchi Key OSQUFVVXNRMSHL-LTHRDKTGSA-M
Safety InformationPersonal Protective Equipment dust mask type N95 (US),, Eyeshields,, Gloves, RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Merocyanine dye, HB194 747211-250MG
Empirical Formula (Hill Notation): C27H21N3O Molecular Weight: 403.48 MDL number: MFCD28009149 PubChem Substance ID: 329765817 NACRES: NA.23 General descriptionMerocyanine dye, HB194 belongs to the class of absorption materials that are majorly used as donor molecules in organic electronic devices. It has a high absorption coefficient and good polarizing properties, which allow it to be utilized as a photorefractive material.ApplicationVAC-processed single high-efficiency Small-BHJ solar cell based on the MC dye
OPV Device Structure: ITO/MoO3/HB194: C60/BPhen/Al- JSC = 13.0 mA/cm2
- VOC = 0.96 V
- FF = 0.49
- PCE = 6.1%
Packaging250 mg in poly bottleПараметрыmp 288-290 °C Quality Level 100, max ~578 nm in dichloromethane SMILES string O=C(C1=C2C=CC=C1)/C(C2=C(C#N)C#N)=C\C=C3C(C)(C)C4=C5C(CCCN5/3)=CC=C4 InChI 1S/C27H21N3O/c1-27(2)22-11-5-7-17-8-6-14-30(25(17)22)23(27)13-12-21-24(18(15-28)16-29)19-9-3-4-10-20(19)26(21)31/h3-5,7,9-13H,6,8,14H2,1-2H3/b21-12-,23-13+ Inchi Key XCFYTQCAMLKFSO-ABLMNQNHSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
N,N-Bis(2,5-di-tert-butylphenyl)-3,4,9,10-perylenedicarboximide 264229-100MG
Empirical Formula (Hill Notation): C52H50N2O4 CAS Number: 83054-80-2 Molecular Weight: 766.96 MDL number: MFCD00010562 PubChem Substance ID: 57648173 NACRES: NA.23 General descriptionN,N-Bis(2,5-di-tert-butylphenyl)-3,4,9,10-perylenedicarboximide (BTBP) is a fluorescence dye that can be used as an electron acceptor. It has an extinction coefficient of 7.4 x 104 cm-1 mol-1 dm3.ApplicationBTBP is a dye that can be used in the development of organic electronic based devices which include organic light emitting diodes(OLED), electroluminescent device and organic solar cells(OSCs).
An n-channel organic semiconductor.Packaging100 mg in glass insertПараметрыassay 97% composition Dye content, 97% mp >300 °C (lit.) max 528 nm semiconductor properties N-type (mobility=1.8x104 cm2/V·s) SMILES string CC(C)(C)c1ccc(c(c1)N2C(=O)c3ccc4c5ccc6C(=O)N(C(=O)c7ccc(c8ccc(C2=O)c3c48)c5c67)c9cc(ccc9C(C)(C)C)C(C)(C)C)C(C)(C)C InChI 1S/C52H50N2O4/c1-49(2,3)27-13-23-37(51(7,8)9)39(25-27)53-45(55)33-19-15-29-31-17-21-35-44-36(22-18-32(42(31)44)30-16-20-34(46(53)56)43(33)41(29)30)48(58)54(47(35)57)40-26-28(50(4,5)6)14-24-38(40)52(10,11)12/h13-26H,1-12H3 Inchi Key BIYPCKKQAHLMHG-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system Personal Protective Equipment dust mask type N95 (US),, Eyeshields,, Gloves, RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
