- Производитель:
- Sigma-Aldrich
NACRES: | NA.23 |
- Metal parts to be plated should be thoroughly cleaned before use. The normal cleaning procedures for electroplating are adequate.
- Bright electroless gold plating solution will show a decrease in pH with use. The pH should not be allowed to deviate from the normal conditions for plating since inferior deposits result. Adjustment of pH can be conveniently accomplished by the addition of small amounts of ammonium hydroxide to raise pH or citric acid to lower it.
- The recommended plating temperature is 90 °C maximum for most metals. However, for tin-lead solders and pure tin, an optimum temperature of 50 °C is recommended.
Bright electroless gold plating solution can be used in the fabrication of electrical contacts in electronic devices. It can be used in the activation of aluminum alloy for complementary metal-oxide-semiconductor (CMOS) sensors. It can be electroplated on a polymeric substrate to fabricate ultra-light metallic micro-lattice materials.
Gold content: 1/3 troy ounce per gallon.
- Economical gold plating
- Plates bright gold on copper, kovar, brass, nickel, tin-lead solders and indium antimonide
- Excellent solution stability
- Operates with simple control of plating solution
- Ready-to-use - no mixing required
form | liquid |
color | colorless |
pH | 7-9 |
pictograms | GHS05,GHS06,GHS09 |
signalword | Danger |
hcodes | H302 - H311 - H314 - H335 - H410 |
pcodes | P261 - P273 - P280 - P301 + P312 - P303 + P361 + P353 - P305 + P351 + P338 |
Target Organs | Respiratory system |
RIDADR | UN2922 - class 8 - PG 2 - EHS - basic - Corrosive liquids, toxic, n.o.s., HI: all |
WGK Germany | WGK 2 |
Flash Point F | Not applicable |
Flash Point C | Not applicable |
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа

С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии

Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.

У большинства компаний срок ожидания составляет 10-12 недель.

Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.

Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.

В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.

Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.