Cytiva„ Products
- Сортировать:
- Вид таблицей
-
GE SE260 mini-vertical unit for two slab gels GESE26010A75
NACRES: NB.22 General descriptionOffers the combined advantages of small format and efficient cooling, an ideal combination for rapid screening of protein and nucleic acid samples. Gels are efficiently cooled using the heat-conductive alumina gel plate and built in heat-exchanger, with or without connection to an external circulator. The alumina back plate of each gel sandwich is in contact with buffer in one of the two buffer chambers, which act as heat sinks. The alumina plate conducts heat away from the gel sandwich into the upper buffer at a rate 40-times faster than glass of comparable thickness. In addition, a serpentine channel through which coolant can be pumped is permanently sealed between the two upper buffer chambers
Runs two 10 cm x 10.5 cm gels, the additional 2.5 cm of length gives more than 25% extra distance to resolve complex samples,you can use a variety of 8 and 10 cm long precast gels.Параметрыpackaging pack of 1 ea Торговая марка Cytiva Article No. 80-6149-35, Cytiva SE260-10A-,75 gel size 10 cm x 10.5 cm Узнать цену -
GE SE400 vertical unit GESE4001515
NACRES: NB.22 General descriptionA sturdier vertical slab gel unit designed with durability and cost in mind. Injection-moulded of tough, impact-resistant plastics, it will withstand the rigours of daily lab use and teaching labs for years. Built-in casting stand seals sandwiches leak-free without tape. Plates, clamps, spacers and combs are interchangeable with SE 600 series units.
Run one 16-cm gel or two gels with an accessory divider plate. Its low cost makes the SE 400 appropriate for labs requiring multiple units when temperature control is not crucial. The unit base is also a convenient casting stand for single gels. To cast multiple gels for one or more units, use the multiple gel casters.Параметрыpackaging pack of 1 ea Торговая марка Cytiva Article No. 80-6155-24, Cytiva SE400-15-1,5 Узнать цену -
GE Storage Phosphor Screens GE29-0171-33
NACRES: NB.22 General descriptionBAS Storage Phosphor Screens- Requires approximately one-tenth the exposure time of traditional autoradiography film.
- Ten to one hundred times more sensitive than film, depending on isotope and sample type.
- Wide linear dynamic range (five orders of magnitude) enables quantitation and visualization of both weak and strong signals in a single exposure.
- Reusable screens do not require chemicals, darkroom, or other special treatment for use.
- Each step can be performed at the lab bench under normal lighting conditions and at room temperature.
- Results are digitized using a storage phosphor imaging system (e.g., Typhoon, Storm, or PhosphorImager) and quantitated using ImageQuant software.
Storage phosphor screens capture latent images produced by ionizing radiation (X-rays, b, and g emissions from isotopes such as 14C, 3H, 125I, 131I, 32P, 33P, 35S, etc.). Upon laser-induced stimulation, light is emitted from the storage phosphor screen in proportion to the amount of radioactivity in the sample. The resulting digital image allows for quantitation of subtle signal intensity differences over a wide dynamic range using storage phosphor imaging systems such as Typhoon, Storm, and PhosphorImager. Typically, 50% to 90% less exposure time is required compared with an equivalent exposure to conventional film. Publication quality images are often obtained in a single exposure.
Storage phosphor screens are reusable and are not degraded by repeated exposure to laboratory levels of radioactivity. To reuse, simply expose a screen to the extra-bright light of ImageEraser light box.
General Purpose (GP) and Multipurpose Standard (MS) screens
GP and MS screens are reliable for a wide variety of applications and can be used with 32P, 125I, 35S, 33P, and 14C. The durable cellulose acetate coating and the phosphor layer formulation make the GP and MS screens well suited for 32P and 125I detection and quantitation. They are the screens of choice for 32P Northerns and Southerns and 125I Western blots and gels.Параметрыpackaging pkg of 1 ea Торговая марка Cytiva availability not available in Japan size 20 cm x 40 cm Узнать цену -
GE Storage Phosphor Screens GE29-0171-39
NACRES: NB.22 General descriptionBAS Storage Phosphor Screens- Requires approximately one-tenth the exposure time of traditional autoradiography film.
- Ten to one hundred times more sensitive than film, depending on isotope and sample type.
- Wide linear dynamic range (five orders of magnitude) enables quantitation and visualization of both weak and strong signals in a single exposure.
- Reusable screens do not require chemicals, darkroom, or other special treatment for use.
- Each step can be performed at the lab bench under normal lighting conditions and at room temperature.
- Results are digitized using a storage phosphor imaging system (e.g., Typhoon, Storm, or PhosphorImager) and quantitated using ImageQuant software.
Storage phosphor screens capture latent images produced by ionizing radiation (X-rays, b, and g emissions from isotopes such as 14C, 3H, 125I, 131I, 32P, 33P, 35S, etc.). Upon laser-induced stimulation, light is emitted from the storage phosphor screen in proportion to the amount of radioactivity in the sample. The resulting digital image allows for quantitation of subtle signal intensity differences over a wide dynamic range using storage phosphor imaging systems such as Typhoon, Storm, and PhosphorImager. Typically, 50% to 90% less exposure time is required compared with an equivalent exposure to conventional film. Publication quality images are often obtained in a single exposure.
Storage phosphor screens are reusable and are not degraded by repeated exposure to laboratory levels of radioactivity. To reuse, simply expose a screen to the extra-bright light of ImageEraser light box.
General Purpose (GP) and Multipurpose Standard (MS) screens
GP and MS screens are reliable for a wide variety of applications and can be used with 32P, 125I, 35S, 33P, and 14C. The durable cellulose acetate coating and the phosphor layer formulation make the GP and MS screens well suited for 32P and 125I detection and quantitation. They are the screens of choice for 32P Northerns and Southerns and 125I Western blots and gels.Параметрыpackaging pkg of 1 ea Торговая марка Cytiva availability not available in Japan size 20 cm x 25 cm Узнать цену -
GE Storage Phosphor Screens GE28-9564-74
NACRES: NB.22 General descriptionBAS Storage Phosphor Screens- Requires approximately one-tenth the exposure time of traditional autoradiography film.
- Ten to one hundred times more sensitive than film, depending on isotope and sample type.
- Wide linear dynamic range (five orders of magnitude) enables quantitation and visualization of both weak and strong signals in a single exposure.
- Reusable screens do not require chemicals, darkroom, or other special treatment for use.
- Each step can be performed at the lab bench under normal lighting conditions and at room temperature.
- Results are digitized using a storage phosphor imaging system (e.g., Typhoon, Storm, or PhosphorImager) and quantitated using ImageQuant software.
Storage phosphor screens capture latent images produced by ionizing radiation (X-rays, b, and g emissions from isotopes such as 14C, 3H, 125I, 131I, 32P, 33P, 35S, etc.). Upon laser-induced stimulation, light is emitted from the storage phosphor screen in proportion to the amount of radioactivity in the sample. The resulting digital image allows for quantitation of subtle signal intensity differences over a wide dynamic range using storage phosphor imaging systems such as Typhoon, Storm, and PhosphorImager. Typically, 50% to 90% less exposure time is required compared with an equivalent exposure to conventional film. Publication quality images are often obtained in a single exposure.
Storage phosphor screens are reusable and are not degraded by repeated exposure to laboratory levels of radioactivity. To reuse, simply expose a screen to the extra-bright light of ImageEraser light box.
General Purpose (GP) and Multipurpose Standard (MS) screens
GP and MS screens are reliable for a wide variety of applications and can be used with 32P, 125I, 35S, 33P, and 14C. The durable cellulose acetate coating and the phosphor layer formulation make the GP and MS screens well suited for 32P and 125I detection and quantitation. They are the screens of choice for 32P Northerns and Southerns and 125I Western blots and gels.Параметрыpackaging pkg of 1 ea Торговая марка Cytiva availability not available in Japan size 20 cm x 40 cm Узнать цену -
GE Storage Phosphor Screens GE28-9564-75
NACRES: NB.22 General descriptionBAS Storage Phosphor Screens- Requires approximately one-tenth the exposure time of traditional autoradiography film.
- Ten to one hundred times more sensitive than film, depending on isotope and sample type.
- Wide linear dynamic range (five orders of magnitude) enables quantitation and visualization of both weak and strong signals in a single exposure.
- Reusable screens do not require chemicals, darkroom, or other special treatment for use.
- Each step can be performed at the lab bench under normal lighting conditions and at room temperature.
- Results are digitized using a storage phosphor imaging system (e.g., Typhoon, Storm, or PhosphorImager) and quantitated using ImageQuant software.
Storage phosphor screens capture latent images produced by ionizing radiation (X-rays, b, and g emissions from isotopes such as 14C, 3H, 125I, 131I, 32P, 33P, 35S, etc.). Upon laser-induced stimulation, light is emitted from the storage phosphor screen in proportion to the amount of radioactivity in the sample. The resulting digital image allows for quantitation of subtle signal intensity differences over a wide dynamic range using storage phosphor imaging systems such as Typhoon, Storm, and PhosphorImager. Typically, 50% to 90% less exposure time is required compared with an equivalent exposure to conventional film. Publication quality images are often obtained in a single exposure.
Storage phosphor screens are reusable and are not degraded by repeated exposure to laboratory levels of radioactivity. To reuse, simply expose a screen to the extra-bright light of ImageEraser light box.
General Purpose (GP) and Multipurpose Standard (MS) screens
GP and MS screens are reliable for a wide variety of applications and can be used with 32P, 125I, 35S, 33P, and 14C. The durable cellulose acetate coating and the phosphor layer formulation make the GP and MS screens well suited for 32P and 125I detection and quantitation. They are the screens of choice for 32P Northerns and Southerns and 125I Western blots and gels.Параметрыpackaging pkg of 1 ea Торговая марка Cytiva availability not available in Japan size 20 cm x 25 cm Узнать цену -
GE Storage Phosphor Screens GE28-9564-76
NACRES: NB.22 General descriptionBAS Storage Phosphor Screens- Requires approximately one-tenth the exposure time of traditional autoradiography film.
- Ten to one hundred times more sensitive than film, depending on isotope and sample type.
- Wide linear dynamic range (five orders of magnitude) enables quantitation and visualization of both weak and strong signals in a single exposure.
- Reusable screens do not require chemicals, darkroom, or other special treatment for use.
- Each step can be performed at the lab bench under normal lighting conditions and at room temperature.
- Results are digitized using a storage phosphor imaging system (e.g., Typhoon, Storm, or PhosphorImager) and quantitated using ImageQuant software.
Storage phosphor screens capture latent images produced by ionizing radiation (X-rays, b, and g emissions from isotopes such as 14C, 3H, 125I, 131I, 32P, 33P, 35S, etc.). Upon laser-induced stimulation, light is emitted from the storage phosphor screen in proportion to the amount of radioactivity in the sample. The resulting digital image allows for quantitation of subtle signal intensity differences over a wide dynamic range using storage phosphor imaging systems such as Typhoon, Storm, and PhosphorImager. Typically, 50% to 90% less exposure time is required compared with an equivalent exposure to conventional film. Publication quality images are often obtained in a single exposure.
Storage phosphor screens are reusable and are not degraded by repeated exposure to laboratory levels of radioactivity. To reuse, simply expose a screen to the extra-bright light of ImageEraser light box.
General Purpose (GP) and Multipurpose Standard (MS) screens
GP and MS screens are reliable for a wide variety of applications and can be used with 32P, 125I, 35S, 33P, and 14C. The durable cellulose acetate coating and the phosphor layer formulation make the GP and MS screens well suited for 32P and 125I detection and quantitation. They are the screens of choice for 32P Northerns and Southerns and 125I Western blots and gels.Параметрыpackaging pkg of 1 ea Торговая марка Cytiva availability not available in Japan size 35 cm x 43 cm Узнать цену -
GE Storage Phosphor Screens GE28-9564-77
NACRES: NB.22 General descriptionBAS Storage Phosphor Screens- Requires approximately one-tenth the exposure time of traditional autoradiography film.
- Ten to one hundred times more sensitive than film, depending on isotope and sample type.
- Wide linear dynamic range (five orders of magnitude) enables quantitation and visualization of both weak and strong signals in a single exposure.
- Reusable screens do not require chemicals, darkroom, or other special treatment for use.
- Each step can be performed at the lab bench under normal lighting conditions and at room temperature.
- Results are digitized using a storage phosphor imaging system (e.g., Typhoon, Storm, or PhosphorImager) and quantitated using ImageQuant software.
Storage phosphor screens capture latent images produced by ionizing radiation (X-rays, b, and g emissions from isotopes such as 14C, 3H, 125I, 131I, 32P, 33P, 35S, etc.). Upon laser-induced stimulation, light is emitted from the storage phosphor screen in proportion to the amount of radioactivity in the sample. The resulting digital image allows for quantitation of subtle signal intensity differences over a wide dynamic range using storage phosphor imaging systems such as Typhoon, Storm, and PhosphorImager. Typically, 50% to 90% less exposure time is required compared with an equivalent exposure to conventional film. Publication quality images are often obtained in a single exposure.
Storage phosphor screens are reusable and are not degraded by repeated exposure to laboratory levels of radioactivity. To reuse, simply expose a screen to the extra-bright light of ImageEraser light box.
General Purpose (GP) and Multipurpose Standard (MS) screens
GP and MS screens are reliable for a wide variety of applications and can be used with 32P, 125I, 35S, 33P, and 14C. The durable cellulose acetate coating and the phosphor layer formulation make the GP and MS screens well suited for 32P and 125I detection and quantitation. They are the screens of choice for 32P Northerns and Southerns and 125I Western blots and gels.Параметрыpackaging pkg of 1 ea Торговая марка Cytiva availability not available in Japan size 20 cm x 40 cm Узнать цену -
GE Storage Phosphor Screens GE28-9564-79
NACRES: NB.22 General descriptionBAS Storage Phosphor Screens- Requires approximately one-tenth the exposure time of traditional autoradiography film.
- Ten to one hundred times more sensitive than film, depending on isotope and sample type.
- Wide linear dynamic range (five orders of magnitude) enables quantitation and visualization of both weak and strong signals in a single exposure.
- Reusable screens do not require chemicals, darkroom, or other special treatment for use.
- Each step can be performed at the lab bench under normal lighting conditions and at room temperature.
- Results are digitized using a storage phosphor imaging system (e.g., Typhoon, Storm, or PhosphorImager) and quantitated using ImageQuant software.
Storage phosphor screens capture latent images produced by ionizing radiation (X-rays, b, and g emissions from isotopes such as 14C, 3H, 125I, 131I, 32P, 33P, 35S, etc.). Upon laser-induced stimulation, light is emitted from the storage phosphor screen in proportion to the amount of radioactivity in the sample. The resulting digital image allows for quantitation of subtle signal intensity differences over a wide dynamic range using storage phosphor imaging systems such as Typhoon, Storm, and PhosphorImager. Typically, 50% to 90% less exposure time is required compared with an equivalent exposure to conventional film. Publication quality images are often obtained in a single exposure.
Storage phosphor screens are reusable and are not degraded by repeated exposure to laboratory levels of radioactivity. To reuse, simply expose a screen to the extra-bright light of ImageEraser light box.
General Purpose (GP) and Multipurpose Standard (MS) screens
GP and MS screens are reliable for a wide variety of applications and can be used with 32P, 125I, 35S, 33P, and 14C. The durable cellulose acetate coating and the phosphor layer formulation make the GP and MS screens well suited for 32P and 125I detection and quantitation. They are the screens of choice for 32P Northerns and Southerns and 125I Western blots and gels.Параметрыpackaging pkg of 1 ea Торговая марка Cytiva availability not available in Japan size 12.7 cm x 12.7 cm Узнать цену -
GE Storage Phosphor Screens GE28-9564-80
NACRES: NB.22 General descriptionBAS Storage Phosphor Screens- Requires approximately one-tenth the exposure time of traditional autoradiography film.
- Ten to one hundred times more sensitive than film, depending on isotope and sample type.
- Wide linear dynamic range (five orders of magnitude) enables quantitation and visualization of both weak and strong signals in a single exposure.
- Reusable screens do not require chemicals, darkroom, or other special treatment for use.
- Each step can be performed at the lab bench under normal lighting conditions and at room temperature.
- Results are digitized using a storage phosphor imaging system (e.g., Typhoon, Storm, or PhosphorImager) and quantitated using ImageQuant software.
Storage phosphor screens capture latent images produced by ionizing radiation (X-rays, b, and g emissions from isotopes such as 14C, 3H, 125I, 131I, 32P, 33P, 35S, etc.). Upon laser-induced stimulation, light is emitted from the storage phosphor screen in proportion to the amount of radioactivity in the sample. The resulting digital image allows for quantitation of subtle signal intensity differences over a wide dynamic range using storage phosphor imaging systems such as Typhoon, Storm, and PhosphorImager. Typically, 50% to 90% less exposure time is required compared with an equivalent exposure to conventional film. Publication quality images are often obtained in a single exposure.
Storage phosphor screens are reusable and are not degraded by repeated exposure to laboratory levels of radioactivity. To reuse, simply expose a screen to the extra-bright light of ImageEraser light box.
General Purpose (GP) and Multipurpose Standard (MS) screens
GP and MS screens are reliable for a wide variety of applications and can be used with 32P, 125I, 35S, 33P, and 14C. The durable cellulose acetate coating and the phosphor layer formulation make the GP and MS screens well suited for 32P and 125I detection and quantitation. They are the screens of choice for 32P Northerns and Southerns and 125I Western blots and gels.Параметрыpackaging pkg of 1 ea Торговая марка Cytiva availability not available in Japan size 8 cm x 13 cm Узнать цену -
GE Storage Phosphor Screens GE28-9564-81
NACRES: NB.22 General descriptionBAS Storage Phosphor Screens- Requires approximately one-tenth the exposure time of traditional autoradiography film.
- Ten to one hundred times more sensitive than film, depending on isotope and sample type.
- Wide linear dynamic range (five orders of magnitude) enables quantitation and visualization of both weak and strong signals in a single exposure.
- Reusable screens do not require chemicals, darkroom, or other special treatment for use.
- Each step can be performed at the lab bench under normal lighting conditions and at room temperature.
- Results are digitized using a storage phosphor imaging system (e.g., Typhoon, Storm, or PhosphorImager) and quantitated using ImageQuant software.
Storage phosphor screens capture latent images produced by ionizing radiation (X-rays, b, and g emissions from isotopes such as 14C, 3H, 125I, 131I, 32P, 33P, 35S, etc.). Upon laser-induced stimulation, light is emitted from the storage phosphor screen in proportion to the amount of radioactivity in the sample. The resulting digital image allows for quantitation of subtle signal intensity differences over a wide dynamic range using storage phosphor imaging systems such as Typhoon, Storm, and PhosphorImager. Typically, 50% to 90% less exposure time is required compared with an equivalent exposure to conventional film. Publication quality images are often obtained in a single exposure.
Storage phosphor screens are reusable and are not degraded by repeated exposure to laboratory levels of radioactivity. To reuse, simply expose a screen to the extra-bright light of ImageEraser light box.
General Purpose (GP) and Multipurpose Standard (MS) screens
GP and MS screens are reliable for a wide variety of applications and can be used with 32P, 125I, 35S, 33P, and 14C. The durable cellulose acetate coating and the phosphor layer formulation make the GP and MS screens well suited for 32P and 125I detection and quantitation. They are the screens of choice for 32P Northerns and Southerns and 125I Western blots and gels.Параметрыpackaging pkg of 1 ea Торговая марка Cytiva availability not available in Japan size 20 cm x 40 cm Узнать цену -
GE Storage Phosphor Screens GE28-9564-82
NACRES: NB.22 General descriptionBAS Storage Phosphor Screens- Requires approximately one-tenth the exposure time of traditional autoradiography film.
- Ten to one hundred times more sensitive than film, depending on isotope and sample type.
- Wide linear dynamic range (five orders of magnitude) enables quantitation and visualization of both weak and strong signals in a single exposure.
- Reusable screens do not require chemicals, darkroom, or other special treatment for use.
- Each step can be performed at the lab bench under normal lighting conditions and at room temperature.
- Results are digitized using a storage phosphor imaging system (e.g., Typhoon, Storm, or PhosphorImager) and quantitated using ImageQuant software.
Storage phosphor screens capture latent images produced by ionizing radiation (X-rays, b, and g emissions from isotopes such as 14C, 3H, 125I, 131I, 32P, 33P, 35S, etc.). Upon laser-induced stimulation, light is emitted from the storage phosphor screen in proportion to the amount of radioactivity in the sample. The resulting digital image allows for quantitation of subtle signal intensity differences over a wide dynamic range using storage phosphor imaging systems such as Typhoon, Storm, and PhosphorImager. Typically, 50% to 90% less exposure time is required compared with an equivalent exposure to conventional film. Publication quality images are often obtained in a single exposure.
Storage phosphor screens are reusable and are not degraded by repeated exposure to laboratory levels of radioactivity. To reuse, simply expose a screen to the extra-bright light of ImageEraser light box.
General Purpose (GP) and Multipurpose Standard (MS) screens
GP and MS screens are reliable for a wide variety of applications and can be used with 32P, 125I, 35S, 33P, and 14C. The durable cellulose acetate coating and the phosphor layer formulation make the GP and MS screens well suited for 32P and 125I detection and quantitation. They are the screens of choice for 32P Northerns and Southerns and 125I Western blots and gels.Параметрыpackaging pkg of 1 ea Торговая марка Cytiva availability not available in Japan size 20 cm x 25 cm Узнать цену -
Gel Filtration Cal Kit High Molecular Weight GE28-4038-42
NACRES: NA.25 General descriptionThe High Molecular Weight (HMW) Kit contains five proteins with Mr in the range 43 000 to 669 000 and Blue Dextran 2000, and provides simple, reliable calibration of gel filtration columns.
The kits are suitable for calibration of high-resolution gel filtration media and columns such as Superdex, Superose, and Sephacryl.Features and Benefits- Well defined protein standards that show excellent behavior in gel filtration and enable simple, reliable calibration of gel filtration columns.
- An optimized range of proteins that suits high-resolution media and prepacked columns.
- Low and high molecular weight ranges from 6500 to 75000 and 43000 to 669000.
- Each kit contains five proteins that are lyophilized in individual vials.
- Includes Blue Dextran 2000 to determine the void fraction in the column.
Параметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pkg of 1 ea Торговая марка Cytiva storage temp. 2-8°C
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Gel Filtration Cal Kit Low Molecular Weight GE28-4038-41
NACRES: NA.25 General descriptionThe Low Molecular Weight (LMW) Kit contains five proteins with Mr in the range 6500 to 75 000 and Blue Dextran 2000, and provides simple, reliable calibration of gel filtration columns.
The kits are suitable for calibration of high-resolution gel filtration media and columns such as Superdex, Superose, and Sephacryl.Features and Benefits- Well defined protein standards that show excellent behavior in gel filtration and enable simple, reliable calibration of gel filtration columns.
- An optimized range of proteins that suits high-resolution media and prepacked columns.
- Low and high molecular weight ranges from 6500 to 75000 and 43000 to 669000.
- Each kit contains five proteins that are lyophilized in individual vials.
- Includes Blue Dextran 2000 to determine the void fraction in the column.
Параметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pkg of 1 ea Торговая марка Cytiva storage temp. 2-8°C
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
Gelatin-Sepharose® 4B GE17-0956-01
NACRES: NA.56 General descriptionGelatin Sepharose® 4B affinity media with immobilized gelatin is designed for the purification or depletion of fibronectin as gelatin binds to fibronectin with high specificity. Gelatin Sepharose® 4B is bovine gelatin coupled to Sepharose® 4B by the cyanogen bromide method.ApplicationGelatin binds specifically to fibronectin, which is a high molecular weight glycoProtein found on the surfaces of many cell types and present in many extracellular fluids including plasma. Gelatin Sepharose® 4B has been designed for the purification or removal of fibronectin.Legal InformationSepharose is a registered trademark of CytivaПараметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 25 mL Торговая марка Cytiva storage condition (20% Ehtanol) matrix 4% agarose particle size 45-165 µm average diameter 90 µm cleaning in place 3 - 12 working range 3 - 10 storage temp. 2-8°C
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
GelBond Film 124 X 258 mm, (Pkg/50) GE80-1129-32
NACRES: NB.22 General descriptionGelBond PAGfilm is a polyester film with a treated surface which binds to the agarose gel.Параметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 50 pieces Торговая марка Cytiva availability not available in Japan storage temp. room temp Узнать цену -
GelBond Film 84 X 94 mm, (Pkg/50) GE80-1129-33
NACRES: NB.22 General descriptionGelBond PAGfilm is a polyester film with a treated surface which binds to the agarose gel.Параметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 50 pieces Торговая марка Cytiva availability not available in Japan storage temp. room temp Узнать цену -
GelBond PAGfilm 124 X 258 mm, (Pkg/50) GE80-1129-36
NACRES: NB.22 General descriptionGelBond PAGfilm is a polyester film with a treated surface which binds to the agarose gel.Параметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 50 pieces Торговая марка Cytiva availability not available in Japan storage temp. room temp Узнать цену -
GelBond PAGfilm, 203 X 260 mm, Pkg/50 GE80-1129-37
NACRES: NB.22 General descriptionGelBond PAGfilm is designed as a support for polyacrylamide gels. One side of the film has a specially treated surface which will react with the acrylamide monomer solution during polymerization to form covalent linkages between the gel and the plastic support.Параметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pack of 50 pieces Торговая марка Cytiva availability not available in Japan storage temp. room temp Узнать цену -
GeneGel™ Excel 12.5/24 kit for use with GenePhor System GE17-6000-14
NACRES: NB.22 Legal InformationGeneGel is a trademark of CytivaПараметрыshelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. packaging pkg of 1 ea Торговая марка Cytiva
Safety InformationRIDADR NONH for all modes of transport Узнать цену -
GenomiPhi™ HY Kit GE25-6600-22
NACRES: NA.55 General descriptionillustra™ GenomiPhi™ HY DNA Amplification Kit offers highly efficient and representative whole-genome amplification with 40 to 50 µg yield from nanogram amounts of DNA sample.
The illustra™ GenomiPhi™ HY DNA Amplification Kit is part of the Phi29 DNA polymerase family of products from Cytiva. It contains all of the components necessary for midi-scale whole genome amplification by isothermal strand displacement amplification.
Amplification is highly uniform over the entire genome so that locus representation remains extremely close to the original DNA sample. Furthermore, amplification is carried out with very high fidelity due to Phi29 DNA polymerase proofreading activity.
The illustra™ GenomiPhi™ HY DNA Amplification Kit procedure is quick, simple and does not require a thermal cycler. A typical DNA yield of 40 to 50 µg DNA can be achieved in four h with little hands-on time. The average product length is over 10 kb. The starting material for GenomiPhi™ reactions can be purified DNA from any commercial kit or homebrew method, or a nonpurified cell lysate may be used. The kit was verified with DNA from various clinical samples including blood and buccal swabs.
GenomiPhi™ amplified DNA is suitable for various applications such as genotyping (SNP, STR, array CGH), cloning, sequencing, and DNA archiving.ApplicationFor midi-scale whole genome amplification by isothermal strand displacement amplification; typical downstream applications are genotyping (SNP, STR, array CGH) and DNA archiving.Features and Benefits- Yields high-quality DNA (e.g., for high-throughput genotyping, hybridization, and DNA archival).
- Outperforms PCR-based whole genome amplification techniques.
- Quick and simple automation-friendly protocol; no thermal cycler required.
- No template-independent, background amplification product.
- Representative isothermal amplification of the whole genome.
Legal InformationGenomiPhi
On packaging and insert:
For use only as licensed by Qiagen GmbH. and Cytiva. The Phi 29 DNA polymerase may not be re-sold or used except in conjunction with the other components of this kit. See US patent numbers 5,854,033, 6,124,120, 6,143,495, 6,323,009, 5,576,204, and equivalent patents and patent applications in other countries.
On container:
Subject to proprietary rights of Cytiva. May not be re-sold or used except with the other components of this kit. See US patent numbers 5,576,204, and equivalent patents and patent applications in other countries.
GenomiPhi is a trademark of Cytiva
illustra is a trademark of CytivaПараметрыusage sufficient for 25 reactions shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. Торговая марка Cytiva availability not available in Japan shipped in dry ice storage temp. 70°C Узнать цену -
Genomiphi™ Hy Kit GE25-6600-25
NACRES: NA.55 General descriptionIllustra GenomiPhi™ HY DNA Amplification Kit offers highly efficient and representative whole-genome amplification with 40 to 50 µg yield from nanogram amounts of DNA sample.Applicationillustra™ GenomiPhi™ HY DNA Amplification Kit is part of the Phi29 DNA polymerase family of products from Cytiva. It contains all of the components necessary for midi-scale whole genome amplification by isothermal strand displacement amplification.
Amplification is highly uniform over the entire genome so that locus representation remains extremely close to the original DNA sample. Furthermore, amplification is carried out with very high fidelity due to Phi29 DNA polymerase proofreading activity.
The illustra™ GenomiPhi™ HY DNA Amplification Kit procedure is quick, simple and does not require a thermal cycler. A typical DNA yield of 40 to 50 µg DNA can be achieved in four h with little hands-on time. The average product length is over 10 kb. The starting material for GenomiPhi™ reactions can be purified DNA from any commercial kit or homebrew method, or a nonpurified cell lysate may be used. The kit was verified with DNA from various clinical samples including blood and buccal swabs.
GenomiPhi™ amplified DNA is suitable for various applications such as genotyping (SNP, STR, array CGH), cloning, sequencing, and DNA archiving.Features and Benefits- Representative isothermal amplification of the whole genome.
- No template-independent, background amplification product.
- Outperforms PCR-based whole genome amplification techniques.
- Quick and simple automation-friendly protocol; no thermal cycler required.
- Yields high-quality DNA (e.g., for high-throughput genotyping, hybridization, and DNA archival).
Legal InformationGenomiPhi
On packaging and insert:
For use only as licensed by Qiagen GmbH. and Cytiva. The Phi 29 DNA polymerase may not be re-sold or used except in conjunction with the other components of this kit. See US patent numbers 5,854,033, 6,124,120, 6,143,495, 6,323,009, 5,576,204, and equivalent patents and patent applications in other countries.
On container:
Subject to proprietary rights of Cytiva. May not be re-sold or used except with the other components of this kit. See US patent numbers 5,576,204, and equivalent patents and patent applications in other countries.
GenomiPhi is a trademark of Cytiva
illustra is a trademark of CytivaПараметрыusage sufficient for 1000 reactions shelf life Please be aware this product may be shipped 90 days before the expiration date. For more information on the batch specific expiration date, please contact technical service. Торговая марка Cytiva storage condition (S-re the kit at -70°C. The enzyme mix must be s-red at -70°C; all other components may be s-red at -20°C Thaw components on ice and maintain at 0°C - 4°C during handling) shipped in dry ice storage temp. 70°C Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
