Pyrex® round media storage bottles and reusable screw caps
Кат. номер |
CLS139525-1EA |
CLS139525-10EA |
These heavy duty 25 mL PYREX round bottles can be used for storage as well as mixing and sampling. They include a linerless, one-piece autoclavable orange polypropylene plug seal GL25 threaded cap. A pouring ring is not included on the 25 mL size. Optional red PBT caps and red ETFE pouring rings are available for dry heat sterilization (180°C). Bottles have permanent white enamel graduations and marking spots.
Caution: DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage.
Pyrex heavy-duty round media storage bottles can be used for storage as well as for mixing and sampling. These media storage bottles Include linerless, one-piece, autoclavable, orange PP plug-seal caps with drip-free pouring rings. Optional red PBTP caps and red ETFE pouring rings are available separately, for dry heat sterilization (180°C).
Pyrex round media storage bottles are made of borosilicate glass with permanent, white enamel graduations and marking spots.
Caution: Bottles larger than 2 L should
NOT be used with bottle-top filter units or in other applications involving vacuum/pressure, as breakage may occur.
DO NOT tighten caps immediately after autoclaving as the vacuum resulting from cooling can cause breakage.
A wide range of optional caps are available for these bottles:
- Vented membrane cap with 0.22 µm PTFE hydrophobic membrane
- Red PBT (polybutylene terephthalate) solid caps and ETFE pouring rings for dry heat sterilization (180°C)
- PBT caps with silicone septa for syringe sampling or introduction of reagents
PYREX is a registered trademark of Corning, Inc.
material | borosilicate glass bottle, clear bottle, cylindrical bottle, orange polypropylene cap (plug seal), wide-mouth bottle |
sterility | non-sterile |
feature | autoclavable, cap, graduations, reusable |
packaging | case of 10 |
Торговая марка | Corning |
availability | not available in EU |
capacity | 25 mL |
diam. x H | 36.5 mm x 70 mm |
fitting | GL 25 neck thread |