Carbon Nanomaterials
- Сортировать:
- Вид таблицей
-
(1,2-Methanofullerene C60)-61-carboxylic acid 658847-25MG
Empirical Formula (Hill Notation): C62H2O2 CAS Number: 155116-19-1 Molecular Weight: 778.68 MDL number: MFCD00213323 NACRES: NA.23 General descriptionBehavior of the fullerene derivative in non aqueous capillary electrophoresis has been studied.ApplicationReagent for preparation of fullerene derivatives. Interaction of C60 fullerence derivative with L-histidine was studied in detail. The quantum chemical calculations were focused on the enantioselective binding between the two. (1,2-Methanofullerene C60)-61-carboxylic acid may find potential application in biomedical and cosmetics.Packaging25 mg in glass insertПараметрыQuality Level 100, description functionalized fullerene assay 97% (HPLC) form powder functional group carboxyl
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P261 - P305 + P351 + P338 Personal Protective Equipment dust mask type N95 (US),, Eyeshields,, Gloves, RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
3D printing graphene ink
Кат. номер 808156-5ML-PW 808156-5ML Application- Direct syringe extrusion into solid fibers or structures-can be extruded by hand, or by machine, from any standard syringe.
- Dip-coating.
- Spin-coating.
- Casting.
- Fusing-separately produced solid 3D printing graphene objects can be joined via application of additional ink at points of contact.
Параметрыdescription 0.12-0.15 Ω-cm (as 3D-printed fibers, not ink, 200-400 μm diameter) Quality Level 100, form viscous liquid particle size 1-15 nm (thick), 1-20 μm (length and width) viscosity 25-45 Pa.s(20 °C) (At low shear stresses. Shear thins to ∼10-15 Pa.s at Shear Stress = 100 Pa) bp 39 °C density 1.5-1.8 g/mL at 25 °C storage temp. 2-8°C
Safety Informationpictograms GHS07,GHS08 signalword Danger hcodes H315 - H319 - H336 - H351 - H360FD - H412 pcodes P202 - P261 - P273 - P302 + P352 - P305 + P351 + P338 - P308 + P313 Target Organs Central nervous system RIDADR UN 1593 6.1 / PGIII WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
4-(1,5-Dihydro-1-methyl-2H-[5,6]fullereno-C60-Ih-[1,9-c]pyrrol-2-yl)benzoic acid 802832-100MG
Empirical Formula (Hill Notation): C70H11NO2 CAS Number: 631918-72-4 Molecular Weight: 897.84 General description4-(1,5-Dihydro-1-methyl-2H-[5,6]fullereno-C60-Ih-[1,9-c]pyrrol-2-yl)benzoic acid (C60-SAM) is a fullerene based self-assembled monolayer that can be used to functionalize the oxide surface for the formation electron selective layer (ECL). It can act as a good electron donor with a high electron affinity. It enhances the overall efficiency of perovskite solar cells (PSCs) by reducing the hysteresis.ApplicationFullerene-based self-assembled monolayers for use in organic electronic devices such as inverted polymer solar cells and perovskite−polymer hybrid solar cells.Packaging100 mg in glass bottleПараметрыQuality Level 100, assay >99% (NMR) form powder
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
5-Fluoro-2,3-thiophenedicarboxaldehyde 708283-500MG
Empirical Formula (Hill Notation): C6H3FO2S CAS Number: 1015071-22-3 Molecular Weight: 158.15 MDL number: MFCD15143649 PubChem Substance ID: 329762784 NACRES: NA.23 ПараметрыQuality Level 100, assay 97% form crystals (fibrous) mp 41-44 °C SMILES string Fc1cc(C=O)c(C=O)s1 InChI 1S/C6H3FO2S/c7-6-1-4(2-8)5(3-9)10-6/h1-3H Inchi Key UHZWVDHHMHBMDX-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H302 - H319 pcodes P301 + P312 + P330 - P305 + P351 + P338 Personal Protective Equipment dust mask type N95 (US),, Eyeshields,, Gloves, RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Boron-doped graphene 900526-250MG
NACRES: NA.23 General description- Typical thickness: 1-5 layers.
- Typical size : 0.5-5 µm.
Application- Electro catalyst.
- Field-effect transistors.
- Sensors.
- Lithium ion batteries.
- Supercapacitors.
Packaging250 mg in poly bottleПараметрыQuality Level 100, description Oxygen: <7.5% assay 95% form powder surface area BET surf. area >500 m2/g cation traces B: 2.0-4.0%, C: 85-95%
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Boron/Nitrogen co-doped graphene 900535-250MG
NACRES: NA.23 General description- Typical thickness: 1-5 layers.
- Typical size : 0.5-5 µm.
Application- Electro catalyst.
- Field-effect transistors.
- Sensors.
- Lithium ion batteries.
- Supercapacitors.
Packaging250 mg in poly bottleПараметрыQuality Level 100, description Oxygen: <7.5% assay 95% form powder surface area BET surf. area >500 m2/g cation traces B: 2.0-4.0%, C: 85-95%, N: 2.0-4.0%
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
C60 Pyrrolidine tris-acid 709085-100MG
Empirical Formula (Hill Notation): C66O6NH7 Molecular Weight: 909.76 NACRES: NA.23 General descriptionC60 Pyrrolidine tris-acid (CPTA) is a fullerene derivative that has carboxyl functionalized carbon buckyballs. It is majorly used in electrochemical devices as an electron transporting layer (ETL) due to its high energy level and electron mobility. It can be used as an alternative to conventional metal oxide based charge carrying films, through the esterification of a carboxylic acid with hydroxyl groups. Its solubility in water and other polar solvents makes it useful in solution processed devices.
This is a high value compound - minimal loss. It is water soluble fullerene, hence suitable for biological applications. Water-soluble fullerene adduct. Mono-adduct solubility at pH ~13 is about 0.5 mg/ml, giving stable solutions with aggregates in the 20 - 200 nm range. At pH 7.4, solubility is about 0.002 - 0.005 mg/ml.ApplicationC60 Pyrrolidine tris-acid may be used as a cathode buffer layer in solar cells. It may be used as a wetting layer in an organic photovoltaics.
CPTA can be used as a cathodic buffer that forms a conductive layer between the active layer and the electrode layer for the fabrication of polymeric solar cells and perovskite based solar cells.Packaging100 mg in glass insertПараметрыQuality Level 100, assay 97% form powder mp >300 °C solubility water, pH >9: soluble
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system Personal Protective Equipment dust mask type N95 (US),, Eyeshields,, Gloves, RIDADR NONH for all modes of transport WGK Germany WGK 3 Узнать цену -
C60 Pyrrolidine tris-acid ethyl ester 709093-250MG
Empirical Formula (Hill Notation): C72H19O6N Molecular Weight: 993.92 NACRES: NA.23 General descriptionInteraction of C60 pyrrolidine tris-acid ethyl ester (PyC60) with bisporphyrin in toluene was investigated.
C60 Pyrrolidine tris-acid ethyl ester is a carboxylic ester terminated fulleropyrrolidine that can be used as an electron acceptor in organic electronic devices. It can be potentially used in the fabrication of perovskite solar cells.ApplicationC60 Pyrrolidine tris-acid ethyl ester may be used to functionalize ZnO nanoparticles, to be used as a cathode buffer layer in solar cells.Packaging250 mg in glass insertПараметрыQuality Level 100, assay 97% (HPLC) form powder mp 240-245 °C solubility chlorobenzene: soluble, organic solvents: soluble, toluene: soluble SMILES string CCOC(=O)CN1C(C(=O)OCC)C23c4c5c6c7c8c9c(c%10c%11c2c%12c%13c4c%14c%15c5c%16c7c%17c8c%18c%19c9c%10c%20c%21c%11c%12c%22c%23c%13c%14c%24c%25c%15c%16c%26c%17c%27c%18c%28c%19c%20c%29c%21c%22c%30c%23c%24c%31c%25c%26c%27c%32c%28c%29c%30c%31%32)C36C1C(=O)OCC
Safety Informationpictograms GHS07 signalword Warning hcodes H315 - H319 - H335 pcodes P261 - P264 - P271 - P280 - P302 + P352 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon Film Supported Copper Hexagonal Mesh Grid TEM-CF100HCU50
General descriptionA 5-6 nm thin film of pure carbon supported hexagonal mesh grids. Copper grid, 100 mesh. Carbon film show better electrical and heat conduction in the electron beam.Параметрыpackaging box of 50 size 100 mesh Узнать цену -
Carbon Film Supported Copper Hexagonal Mesh Grid TEM-CF300HCU50
General descriptionA 5-6 nm thin film of pure carbon supported hexagonal mesh grids. Copper grid, 300 mesh. Carbon film show better electrical and heat conduction in the electron beam.Параметрыpackaging box of 50 size 300 mesh Узнать цену -
Carbon Film Supported Copper Hexagonal Mesh Grid TEM-CF400HCU50
General descriptionA 5-6 nm thin film of pure carbon supported hexagonal mesh grids. Copper grid, 400 mesh. Carbon film show better electrical and heat conduction in the electron beam.Параметрыpackaging box of 50 size 400 mesh Узнать цену -
Carbon Film Supported Copper London Finder LF400 Grids TEM-CFLF400CU
General descriptionA 5-6 nm thin film of pure carbon supported London finder (LF400) grids. Copper grid. Carbon film show better electrical and heat conduction in the electron beam. London finder grids are locator grids with reference/index on the grid.Параметрыpackaging box of 25 Узнать цену -
Carbon Film Supported Copper Single Hole Grid TEM-CFGA100CU
General descriptionA 5-6 nm thin film of pure carbon supported single hole grid. Copper grid, 100 micron hole. Carbon film show better electrical and heat conduction in the electron beam.Параметрыpackaging box of 25 hole size 100 μm Узнать цену -
Carbon Film Supported Copper Thin Bar Square Mesh Grid TEM-CFT300CU
General descriptionA 5-6 nm thin film of pure carbon supported thin bar square mesh grid. Copper grid, 300 mesh. Carbon film show better electrical and heat conduction in the electron beam.Параметрыpackaging box of 25 size 300 mesh Узнать цену -
Carbon Film Supported Copper Thin Bar Square Mesh Grid TEM-CFT400CU
General descriptionA 5-6 nm thin film of pure carbon supported thin bar square mesh grid. Copper grid, 400 mesh. Carbon film show better electrical and heat conduction in the electron beam.Параметрыpackaging box of 25 size 400 mesh Узнать цену -
Carbon nanofibers 719781-25G
Empirical Formula (Hill Notation): C Molecular Weight: 12.01 MDL number: MFCD00133992 PubChem Substance ID: 329763680 ApplicationCarbon nanofibers (CNFs) are carbon based nanostructures that can be used for a variety of applications such as tissue engineering, lithium based batteries, supercapacitors, and solar desalinations.Packaging25 g in glass bottlePreparation NoteProduced by Floating Catalyst Vapor-Grown Method.Legal InformationProduct of Pyrograf® Products Inc.
Pyrograf is a registered trademark of Applied Sciences, Inc.ПараметрыQuality Level 200 form powder D x L 100 nm x 20-200 µm impurities iron-free, <100 ppm Iron content average diameter 130 nm pore size 0.075 cm3/g average pore volume, 124 average pore diameter surface area average specific surface area 24 m2/g mp 3652-3697 °C density 1.9 g/mL at 25 °C bulk density 0.53.5 lb/cu.ft InChI 1S/C InChI key OKTJSMMVPCPJKN-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H319 - H335 pcodes P261 - P264 - P271 - P280 - P304 + P340 + P312 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanofibers 719803-25G
Empirical Formula (Hill Notation): C Molecular Weight: 12.01 MDL number: MFCD00133992 PubChem Substance ID: 329763681 NACRES: NA.23 ApplicationCarbon nanofibers may be used in lithium ion batteries.Packaging25 g in glass bottlePreparation NoteProduced by Floating Catalyst Vapor-Grown MethodLegal InformationProduct of Pyrograf® Products Inc.
Pyrograf is a registered trademark of Applied Sciences, Inc.ПараметрыQuality Level 200, assay >98% carbon basis form platelets (conical), powder D x L 100 nm x 20-200 µm impurities <14,000 ppm Iron content average diameter 130 nm pore size 0.12 cm3/g average pore volume, 126.1 average pore diameter surface area average specific surface area 39 m2/g mp 3652-3697 °C density 1.9 g/mL at 25 °C bulk density 0.53.5 lb/cu.ft InChI 1S/C Inchi Key OKTJSMMVPCPJKN-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H319 - H335 pcodes P261 - P264 - P271 - P280 - P304 + P340 + P312 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanofibers 719811-25G
Empirical Formula (Hill Notation): C Molecular Weight: 12.01 MDL number: MFCD00133992 PubChem Substance ID: 329763682 NACRES: NA.23 General descriptionVapor grown carbon nanofibers (VGCF) can impart dissipative properties and enhance mechanical properties to polymer, ceramic and metal matrices. Tailor made surface functionalization of carbon nanofibers is possible owing to its unique surface state.ApplicationAdsorption of monoclonal CD3 antibodies on the modified surfaces of pyrolytically stripped carbon nanofibers were studied.Packaging25 g in glass bottlePreparation NoteProduced by Floating Catalyst Vapor-Grown MethodLegal InformationProduct of Pyrograf® Products Inc.
Pyrograf is a registered trademark of Applied Sciences, Inc.ПараметрыQuality Level 200, assay >98% carbon basis form platelets (conical), powder D x L 100 nm x 20-200 µm impurities <14,000 ppm Iron content average diameter 130 nm pore size 0.12 cm3/g average pore volume, 89.3 average pore diameter surface area average specific surface area 54 m2/g mp 3652-3697 °C density 1.9 g/mL at 25 °C bulk density 0.53.5 lb/cu.ft InChI 1S/C Inchi Key OKTJSMMVPCPJKN-UHFFFAOYSA-N
Safety Informationpictograms GHS07 signalword Warning hcodes H319 - H335 pcodes P261 - P264 - P271 - P280 - P304 + P340 + P312 - P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanohorns, as-grown 804118-250MG
Empirical Formula (Hill Notation): C Molecular Weight: 12.01 General descriptionSingle-walled carbon nanohorns are made of graphene sheets with long cone-shaped tips with the diameters of 2-5 nm and the length of 40-50 nm. Thousands of carbon nanohorns form spherical aggregates of about 100 nm in diameter.- Uniform size
- High dispersion
- High purity, no metallic compound
- Large surface area
- Utilization of internal space in carbon nanohorn
Application- Energy management system:
Fuel cell (Good support materials for catalyst metal such as platinum)- Medical: Carrier containing the anticancer drug.
- Gas adsorption: Adsorption of highly reactive gas.
- Compound material: Additive for characteristic improvement (improve electrical properties).
Packaging250 mg in poly bottleПараметрыdescription Dispersibility in water: hydrophobic Quality Level 100, assay 90% (TGA) impurities 0% metallic, 10% graphite, amorphous diameter 2-5 nm (TEM) surface area spec. surface area 400 m2/g (BET)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanohorns, oxidized 804126-250MG
Linear Formula: CxOyHz General description- Single-walled carbon nanohorns are made of graphene sheets with long cone-shaped tips with the diameters of 2-5 nm and the length of 40-50 nm. Thousands of carbon nanohorns form spherical aggregates of about 100 nm in diameter.
- Uniform size
- High dispersion
- High purity, no metallic compound
- Large surface area
- Utilization of internal space in carbon nanohorn
- Holes were formed on the sheath of carbon nanohorn by oxidation treatments. Several materials can be accessible into thecarbon nanohorn sheath.
Application- Energy management system:
Fuel cell (Good support materials for catalyst metal such as platinum)- Medical :Carrier containing the anticancer drug
- Gas adsorption: Adsorption of highly reactive gas
- Compound material: Additive for characteristic improvement (improve electrical properties)
Packaging250 mg in poly bottleПараметрыQuality Level 100, description Dispersibility in water: hydrophilic assay 90% (TGA) form powder or crystals impurities 0% Metallic compound, 10% graphite; amorphous diameter 2-5 nm (TEM) surface area spec. surface area 1300-1400 m2/g (BET)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 1 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanotube array, multi-walled
CAS Number: 308068-56-6 NACRES: NA.23
Кат. номер 901052-1EA-PW 901052-1EA General descriptionMulti-walled carbon nanotubes (MWCNT) are vertically aligned on a Si substrate. MWCNT is as long as millimetre scale. Crystal quality of CNT is examined by Raman scattering measurement. Intensity ratio of G-peak (1580 cm-1) and D-peak (1350 cm-1) represents quality of graphitization of carbon materials. G/D of this CNT is ~3, showing high crystal quality. The high crystallinity is supported by transmission electron microscopy.Preparation NoteChemical Vapor Deposition (CVD) method.ПараметрыQuality Level 100, description Areal density: 1-5x109 cm-2, Form: 20 mmx20 mm Si substrate assay 98% (carbon as CNT) diam. x L 10-40 nm x 1.0 mm ± 0.1 mm
Safety Informationpictograms GHS07 signalword Warning hcodes H319 - H335 pcodes P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanotube array, multi-walled 687804-1EA
CAS Number: 308068-56-6 MDL number: MFCD00133992 PubChem Substance ID: 329761156 NACRES: NA.23 General descriptionMulti walled carbon nanotubes (MWNTs, CNTs) was prepared by plasma enhanced chemical vapor deposition (PECVD). The CNTs formed can be formed in bundles over a catalyst support or in patterns over substrates.1 Each MWCNT is tipped with nickel-catalyst particle with diameter equal to diameter of the nanotube.ApplicationHigh quality CNT arrays suitable for nanoelectronicsFeatures and BenefitsEach MWCNT is tipped with nickel-catalyst particle with diameter equal to diameter of the nanotube.PackagingPackaged in Vacuum Release™ (VR) Trays. See Technical bulletin AL-237.Preparation NotePlasma-Enhanced Chemical Vapor Deposition (PECVD) MethodLegal InformationVacuum Release is a trademark of Gel-PakПараметрыQuality Level 100, assay >95 atom % carbon basis (x-ray) form (1cm x 1cm Si wafer substrate, {100}, 300-550 µm thick, n-doped, resistivity 1-10 ohm-cm.) diam. x L 100-150 nm x 30 µm , SEM surface coverage surface coverage (CNT) ~1 x 1092 x 109 nm/cm2 InChI 1S/C InChI key OKTJSMMVPCPJKN-UHFFFAOYSA-N
Safety InformationPersonal Protective Equipment dust mask type N95 (US),, Eyeshields,, Gloves, RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanotube array, multi-walled, drawable
CAS Number: 308068-56-6 NACRES: NA.23
Кат. номер 901046-1EA-PW 901046-1EA General descriptionMulti-walled carbon nanotubes (MWCNT) are vertically aligned on a Si substrate with a high density. Since all the MWCNTs are bundled by van der Walls force, CNT web is drawn easily by pinching an edge of the array out from the substrate. The web is very light weight and robust, and sometimes semi-transparent.
Crystal quality of CNT is examined by Raman scattering measurement. Intensity ratio of G-peak (1580 cm-1) and D-peak (1350 cm-1) represents quality of graphitization of carbon materials. G/D of our CNT is ~3, showing high crystal quality.Preparation NoteChemical Vapor Deposition (CVD) method.Параметрыdescription Form: 10 mmx20 mm Si substrate Quality Level 100, assay 98% (carbon as CNT) diam. × L 10-40 nm x 1.0 mm ± 0.5 mm
Safety Informationpictograms GHS08 signalword Danger hcodes H340 pcodes P201 - P308 + P313 RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanotube sheet 901082-1EA
CAS Number: 308068-56-6 General descriptionMulti-walled carbon nanotubes are aligned in a direction. The CNTs are just connected with van der Waals forces, and no binder material is used. The sheet shows high anisotropic transport properties, including electrical conductivity and thermal conductivity.
CNT has a multi-walled structure. Crystal quality of CNT is examined by Raman scattering measurement. Intensity ratio of G-peak (1580 cm-1) and D-peak (1350 cm-1) represents quality of graphitization of carbon materials. G/D of CNT is 3, showing high crystal quality. The high crystallinity is supported by transmission electron microscopy.Preparation NoteChemical Vapor Deposition (CVD) method.ПараметрыQuality Level 100, assay >95% (carbon) resistivity 10-1000 Ω/sq size × thickness 100 mm x 100 mm x 1-5 μm diameter 10-40 nm (carbon nanotubes)
Safety Informationpictograms GHS07 signalword Warning hcodes H319 - H335 pcodes P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanotube sheet 901056-1EA
CAS Number: 308068-56-6 General descriptionMulti-walled carbon nanotubes are aligned in a direction. The CNTs are just connected with van der Waals forces, and no binder material is used. The sheet shows high anisotropic transport properties, including electrical conductivity and thermal conductivity.
CNT has a multi-walled structure. Crystal quality of CNT is examined by Raman scattering measurement. Intensity ratio of G-peak (1580 cm-1) and D-peak (1350 cm-1) represents quality of graphitization of carbon materials. G/D of CNT is ~3, showing high crystal quality. The high crystallinity is supported by transmission electron microscopy.Preparation NoteChemical Vapor Deposition (CVD) method.ПараметрыQuality Level 100, assay >95% (carbon) resistivity 10-1000 Ω/sq size × thickness 50 mm x 50 mm x 1-5 μm diameter 10-40 nm (carbon nanotubes)
Safety Informationpictograms GHS07 signalword Warning hcodes H319 - H335 pcodes P305 + P351 + P338 Target Organs Respiratory system RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanotube, double-walled
CAS Number: 308068-56-6 MDL number: MFCD06411993 NACRES: NA.23
Кат. номер 637351-250MG 637351-1G General descriptionStructure of double walled carbon nanotubes (DWNTs) can be imagined as a two coaxial concentric single walled carbon nanotubes (SWNTs). It has been prepared by catalytic chemical vapor deposition. DWNTs exhibit excellent field emission properties and may be potentially useful as field emission displays (FEDs) and field emission transistors (FETs).
We are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here,.ApplicationCarbon nanotube, double walled can be used for a variety of applications such as solar cells, nanomechanical resonators, film heaters, biosensors, and field emission displays.Packaging250 mg in glass insert
1 g in glass bottle
Packaged in glass bottlesPreparation NoteChemical Vapor Deposition (CVD) MethodAnalysis Note50-80% DWNT content, 10-40% other CNTs, remainder being amorphous carbon and residual metal catalysts.Параметрыassay 50-80% carbon basis form powder composition carbon, >90% (trace metal basis) greener alternative product characteristics Design for Energy Efficiency
Learn more about the Principles of Green Chemistry,.O.D. x I.D. x L 5 nm x 1.3-2.0 nm x 50 µm surface area BET surf. area >600 m2/g bulk density 0.120.14 g/mL greener alternative category Enabling,
Safety InformationPersonal Protective Equipment dust mask type N95 (US),, Eyeshields,, Gloves, RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanotube, double-walled 755141-1G
CAS Number: 308068-56-6 MDL number: MFCD06411993 NACRES: NA.23 General descriptionStructure of double walled carbon nanotubes (DWNTs) can be imagined as a two coaxial concentric single walled carbon nanotubes (SWNTs). It has been prepared by catalytic chemical vapor deposition. DWNTs exhibit excellent field emission properties and may be potentially useful as field emission displays (FEDs) and field emission transistors (FETs).ApplicationApplications include:- Electronics
- Sensors
- Composites
- Energy Storage
- Study of Life Science systems
Packaging1 g in glass bottlePreparation NoteCatalytic Carbon Vapor Deposition (CCVD) MethodLegal InformationProduct of Nanocyl, Inc.ПараметрыQuality Level 100, form powder avg. diam. × L 3.5 nm x 3 μm , TEM impurities ≤10% Metal Oxide (TGA)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanotube, double-walled 755168-1G
CAS Number: 308068-56-6 MDL number: MFCD06411993 General descriptionStructure of double walled carbon nanotubes (DWNTs) can be imagined as a two coaxial concentric single walled carbon nanotubes (SWNTs). It has been prepared by catalytic chemical vapor deposition. DWNTs exhibit excellent field emission properties and may be potentially useful as field emission displays (FEDs) and field emission transistors (FETs).Packaging1 g in glass bottleApplicationApplications include:- Electronics
- Sensors
- Composites
- Energy Storage
- Study of Life Science systems
Preparation NoteCatalytic Carbon Vapor Deposition (CCVD) MethodLegal InformationProduct of Nanocyl, Inc.Параметрыform powder Quality Level 100, avg. diam. x L 3.5 nm x 1-10 µm , TEM impurities <10% Metal Oxide (TGA) surface area spec. surface area >500 m2/g (BET)
Safety Informationpictograms GHS08 signalword Danger hcodes H340 pcodes P201-P280-P308 + P313 RIDADR NONH for all modes of transport WGK Germany 3 Узнать цену -
Carbon nanotube, few-walled
CAS Number: 308068-56-6
Кат. номер 900788-250MG 900788-1G General descriptionSignis® FW100 is engineered to meet the growing demand for a material with the high conductivity, large surface area, and to contain mostly double and triple walled carbon nanotubes. Applications for few-walled carbon nanotubes include advanced battery electrode additives, super/ultracapacitor materials, and more.Application- Battery materials.
- Supplementation of lithium sulphur battery cathode materials.
Packaging1 g in glass bottle
250 mg in glass bottleFeatures and Benefits- Reinforced molecular structure.
- Improved electron transport.
Preparation NoteCoMoCAT™ synthesis processLegal InformationCoMoCAT is a trademark of Chasm Advanced Materials
Signis is a registered trademark of Chasm Advanced MaterialsПараметрыdescription Deposition temp: 550 ± 50 °C, G/D ratio: 10 (Raman), Median number of walles: 2 to 3 (TEM) Quality Level 100, assay 94% (carbon as CNT by TGA) form powder composition Carbon, 95% TGA , carbon, 95% sheet resistance 350 /sq, at 0.15 g/m2 (Buckypaper) D x L 2.5-3 nm x 2-6 µm impurities 5 wt. % moisture content (TGA) surface area spec. surface area 700 m2/g (BET) bulk density 0.05 g/cm3 (ASTM D7481)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanotube, multi-walled 698849-1G
CAS Number: 308068-56-6 NACRES: NA.23 General descriptionWe are committed to bringing you Greener Alternative Products, which adhere to one or more of The 12 Principles of Greener Chemistry. This product has been enhanced for energy efficiency. Find details here.
Multi walled carbon nanotubes (MWNTs, CNTs) were prepared by chemical vapor deposition (CVD). In chemical vapor deposition (CVD), a volatile precursor undergoes thermal decomposition at elevated temperatures to form a solid deposit on a substrate. The diameter of the tube ranges between 6-13nm and the average length is 10µm. The multiwalled nanotubes are stable in inert atmosphere upto a temperature of 3697oC. CVD production method is followed by HCl demineralization.ApplicationCarbon nanotube, multi-walled (MWNT) belongs to the class of carbonaceous materials with excellent physiochemical, thermo-mechanical and electrochemical properties. This material can be used in a variety of sustainable energy applications such as solar cells, photocatalysis, biosensor, gas sensor, supercapacitor and as a filler that acts as a reinforcement to improve the mechanical property of composites.
A hybrid nanostructure system of MWNTs/titania was fabricated to be used as photodiodes in dye sensitized solar cells. MWNTs were investigated as electrodes for electrochemical biosensors. Use of MWNTs increased the efficacy, sensitivity and mechanical strength of the sensors.Packaging1 g in glass bottlePhysical formaverage wall thickness 7-13 graphene layersPreparation NoteChemical Vapor Deposition (CVD) MethodПараметрыQuality Level 100 assay >98% carbon basis form powder composition carbon, >98% (total metals impurities) greener alternative product characteristics Design for Energy Efficiency
Learn more about the Principles of Green Chemistry.O.D. x L 6-13 nm x 2.5-20 µm size 10 µm , average length, TEM, 12 nm , average diameter, HRTEM surface area BET surf. area ~220 m2/g (SSA) mp 3652-3697 °C (lit.) density ~2.1 g/mL at 25 °C (lit.)
Safety InformationPersonal Protective Equipment dust mask type N95 (US), Eyeshields, Gloves RIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanotube, multi-walled 901019-25G
CAS Number: 308068-56-6 Preparation NoteChemical Vapor Deposition (CVD) MethodПараметрыdescription D/G ratio: 0.1 (by Raman spectroscopy), Real density: 2.1 g/cm^3 (by Pycnometer) Quality Level 100 assay >95% carbon basis aspect ratio >100 , by FE-SEM diameter 50-90 nm, 65 nm (by FE-SEM) surface area spec. surface area 28 m2/g (by N2 adsorption) mp 3652-3697 °C (lit.) density ~2.1 g/mL at 25 °C (lit.) bulk density 0.007 g/cm3 (by HCC method)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanotube, multi-walled 755133-5G
CAS Number: 308068-56-6 NACRES: NA.23 General descriptionMulti walled carbon nanotubes (MWNTs, CNTs) were prepared by chemical vapor deposition (CVD). In chemical vapor deposition (CVD), a volatile precursor undergoes thermal decomposition at elevated temperatures to form a solid deposit on a substrate. Compared to other techniques, CVD produces greater yield of carbon nanotubes. Morphology and structure of the nanotubes can be easily tuned using CVD technique. The CNTs formed can be formed in bundles over a catalyst support or in patterns over substrates.1Packaging5 g in glass bottleApplicationApplications include:
Electronics
Sensors
Composites
Energy Storage
Study of Life Science systemPreparation NoteCatalytic Carbon Vapor Deposition (CCVD) MethodLegal InformationProduct of Nanocyl, Inc.ПараметрыQuality Level 100, form powder avg. diam. x L 9.5 nm x 1.5 µm , TEM impurities <5% Metal Oxide (TGA) mp 3652-3697 °C (lit.) density ~2.1 g/mL at 25 °C (lit.)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanotube, multi-walled 901002-1G
CAS Number: 308068-56-6 General descriptionThis carbon nanotube flakes are millimetre-scale multi-walled carbon nanotube bundles. Crystal quality of CNT is examined by Raman scattering measurement. Intensity ratio of G-peak (1580 cm-1) and D-peak (1350 cm-1) represents quality of graphitization of carbon materials. G/D of the CNT is 3, showing high crystal quality.Preparation NoteChemical Vapor Deposition (CVD) MethodПараметрыQuality Level 100, assay >95% carbon basis O.D. × L 10-40 nm x 0.5-1.5 mm mp 3652-3697 °C (lit.) density ~2.1 g/mL at 25 °C (lit.)
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену -
Carbon nanotube, multi-walled, carboxylic acid functionalized 755125-1G
NACRES: NA.23 General descriptionMulti walled carbon nanotubes (MWNTs, CNTs) were prepared by chemical vapor deposition (CVD). In chemical vapor deposition (CVD), a volatile precursor undergoes thermal decomposition at elevated temperatures to form a solid deposit on a substrate. 1 Carboxylic acid groups can be attached to the defect sides and ends of the nanotube by treatment with oxidizing agents. Carboxylic acid groups can be easily derivatized into different functional groups.ApplicationThese carbon nanotubes are produced via the Catalytic Carbon Vapor
Deposition (CCVD) process. Applications include Electronics; 1 Sensors; 2 Composites; Energy Storage and Study of Life Science systems.3Packaging1 g in glass bottlePreparation NoteCatalytic Carbon Vapor Deposition (CCVD) MethodLegal InformationProduct of Nanocyl, IncПараметрыQuality Level 100 description carboxylic acid functionalized assay >80% carbon basis form powder extent of labeling >8% carboxylic acid functionalized avg. diam. × L 9.5 nm x 1.5 μm functional group carboxyl
Safety InformationRIDADR NONH for all modes of transport WGK Germany WGK 3 Flash Point F Not applicable Flash Point C Not applicable Узнать цену
Получите коммерческое предложение в течение 1 часа
Менеджер подготовит коммерческое предложение и позвонит, если понадобится уточнить детали вашего заказа
Анна Гловацкая
Менеджер по работе с клиентами
С 2010 года мы поставляем оборудование с заводов Европы. Берем на себя все — от подбора оборудования до внедрения на предприятии
Все сотрудники имеют высшее образование, закончили ведущие химические вузы страны, такие как РХТУ им Менделеева.
У большинства компаний срок ожидания составляет 10-12 недель.
Оборудование хранится на сухом отапливаемом складе, где поддерживается ровная температура.
Работаем с PonyExpress и Деловыми линиями. Вы также можете выбрать свою транспортную компанию или забрать товар со склада в Москве.
В случае любых неполадок за свой счет выполним ремонт в сервисном центре или на заводе-изготовителе. Или бесплатно заменим прибор на новый.
Производим пуско-наладку оборудования, валидацию, обучение сотрудников. Если нужно, привлекаем инженеров с заводов- изготовителей.
