5319-2250 Burkle GmbH

The Jumbo sampler Multi prevents the sample material from being mixed by separators. The separate chambers provide multiple point samples from different layers of a bulk material. These can be analysed specifically or combined to form a mixed sample that accurately reflects the overall composition of the material.
The zone sampler is easily autoclaved and flamed, minimising the risk of sample contamination.
The Jumbo zone sampler is used for sampling through all layers, particularly of coarse-grained bulk materials. The long sampling lances with 50 mm tube diameter and the extra large chamber volume allow large quantities of samples to be taken with large grain sizes.
This zone sampler ensures representative sampling through all layers or zones of the sample material and is essential for accurate analysis and quality control in various industries.
With lances that can be used both vertically and horizontally, this sampler offers maximum flexibility when sampling from different types of bins, silos or piles.
Multi-sampler for sampling large grains at multiple target points
Extra large chambers for extensive analyses
Robust construction for long-lasting reliability
Easy maintenance and cleaning to prevent cross-contamination
Large collection volume due to open inner tube and at the same time no mixing of the material by separatorsFor the collection of target point or mixed samples The Jumbo sampler is widely used in various industries where it is important to take representative samples from different layers or areas of a material with a large particle size.
This is particularly important in quality control and quality management in industry, especially in the food, pharmaceutical, chemical and building materials industries, to check compliance with quality standards. In research and development to analyse the composition, properties or impurities of a material. In raw material extraction and processing to assess the quality and composition of a material.
A representative sample is essential for accurate test results.
Turn the handle of the multi-collector clockwise, the multi-collector is now closed and can be inserted into the powder/granulate.At the desired depth, turn the handle on the collector counterclockwise.The collection chambers are opened and filled with sample.By turning the handle clockwise again, the collector is closed again and can be removed from the powder/granulate.Open the multi-collector and empty the sample onto an appropriately prepared surface